Current detection using a Josephson parametric upconverter
- URL: http://arxiv.org/abs/2001.02521v1
- Date: Wed, 8 Jan 2020 13:39:58 GMT
- Title: Current detection using a Josephson parametric upconverter
- Authors: Felix E. Schmidt, Daniel Bothner, Ines C. Rodrigues, Mario F. Gely,
Mark D. Jenkins, and Gary A. Steele
- Abstract summary: We present the design, measurement and analysis of a current sensor based on a process of Josephson parametric upconversion in a superconducting microwave cavity.
We observe modulation sidebands from the cavity that enable highly sensitive, frequency-multiplexed output of small currents.
We derive an analytical model to reproduce the measurements over a wide range of bias currents, detunings and input powers.
- Score: 0.0
- License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
- Abstract: We present the design, measurement and analysis of a current sensor based on
a process of Josephson parametric upconversion in a superconducting microwave
cavity. Terminating a coplanar waveguide with a nanobridge constriction
Josephson junction, we observe modulation sidebands from the cavity that enable
highly sensitive, frequency-multiplexed output of small currents for
applications such as transition-edge sensor array readout. We derive an
analytical model to reproduce the measurements over a wide range of bias
currents, detunings and input powers. Tuning the frequency of the cavity by
more than \SI{100}{\mega\hertz} with DC current, our device achieves a minimum
current sensitivity of \SI{8.9}{\pico\ampere\per\sqrt{\hertz}}. Extrapolating
the results of our analytical model, we predict an improved device based on our
platform, capable of achieving sensitivities down to
\SI{50}{\femto\ampere\per\sqrt{\hertz}}}, or even lower if one could take
advantage of parametric amplification in the Josephson cavity. Taking advantage
of the Josephson architecture, our approach can provide higher sensitivity than
kinetic inductance designs, and potentially enables detection of currents
ultimately limited by quantum noise.
Related papers
- Josephson bifurcation readout: beyond the monochromatic approximation [49.1574468325115]
We analyze properties of bifurcation quantum detectors based on weakly nonlinear superconducting resonance circuits.
This circuit can serve as an efficient detector of the quantum state of superconducting qubits.
arXiv Detail & Related papers (2024-05-25T22:22:37Z) - Robust shallow shadows [0.251657752676152]
We present a robust shadow estimation protocol for wide classes of shallow measurement circuits.
We show how to estimate this directly from experimental data using tensor-network tools.
Under the practical constraints of current and near-term noisy quantum devices, our method maximally realizes the potential of shadow estimation with global rotations.
arXiv Detail & Related papers (2024-05-09T18:00:09Z) - Bolometric detection of Josephson radiation [0.0]
The bolometer converts ac Josephson current at microwave frequencies, up to about $100,$GHz, into a measurable dc temperature rise.
The present experiment demonstrates an efficient, wide-band, thermal detection scheme of microwave photons and provides a sensitive detector of Josephson dynamics.
arXiv Detail & Related papers (2024-02-14T17:06:45Z) - Design and simulation of a transmon qubit chip for Axion detection [103.69390312201169]
Device based on superconducting qubits has been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND)
In this study, we present Qub-IT's status towards the realization of its first superconducting qubit device.
arXiv Detail & Related papers (2023-10-08T17:11:42Z) - Microwave quantum illumination with correlation-to-displacement
conversion [0.7874708385247353]
Entanglement is vulnerable to degradation in a noisy sensing scenario.
Recent progress in a correlation-to-displacement conversion module provides a route towards an optimal protocol.
arXiv Detail & Related papers (2023-03-31T16:59:59Z) - Variational waveguide QED simulators [58.720142291102135]
Waveguide QED simulators are made by quantum emitters interacting with one-dimensional photonic band-gap materials.
Here, we demonstrate how these interactions can be a resource to develop more efficient variational quantum algorithms.
arXiv Detail & Related papers (2023-02-03T18:55:08Z) - Directional Josephson traveling-wave parametric amplifier via
non-Hermitian topology [58.720142291102135]
Low-noise microwave amplification is crucial for detecting weak signals in quantum technologies and radio astronomy.
Current amplifiers do not satisfy all these requirements, severely limiting the scalability of superconducting quantum devices.
Here, we demonstrate the feasibility of building a near-ideal quantum amplifier using a homogeneous Josephson junction array and the non-trivial topology of its dynamics.
arXiv Detail & Related papers (2022-07-27T18:07:20Z) - A fast tunable 3D-transmon architecture for superconducting qubit-based
hybrid devices [0.0]
We introduce a fast-flux line for a frequency tunable transmon qubit in 3D cavity architecture.
We investigate the flux-dependent dynamic range, relaxation from unconfined states, and the bandwidth of the flux-line.
arXiv Detail & Related papers (2022-04-01T06:59:11Z) - Detector Array Readout with Traveling Wave Amplifiers [0.0]
Noise at the quantum limit over a large bandwidth is a fundamental requirement for future applications operating at millikelvin temperatures.
The DARTWARS project has the goal of developing high-performing innovative traveling wave parametric amplifiers.
arXiv Detail & Related papers (2021-11-02T11:33:17Z) - Performance of teleportation-based error correction circuits for bosonic
codes with noisy measurements [58.720142291102135]
We analyze the error-correction capabilities of rotation-symmetric codes using a teleportation-based error-correction circuit.
We find that with the currently achievable measurement efficiencies in microwave optics, bosonic rotation codes undergo a substantial decrease in their break-even potential.
arXiv Detail & Related papers (2021-08-02T16:12:13Z) - Hardware-Encoding Grid States in a Non-Reciprocal Superconducting
Circuit [62.997667081978825]
We present a circuit design composed of a non-reciprocal device and Josephson junctions whose ground space is doubly degenerate and the ground states are approximate codewords of the Gottesman-Kitaev-Preskill (GKP) code.
We find that the circuit is naturally protected against the common noise channels in superconducting circuits, such as charge and flux noise, implying that it can be used for passive quantum error correction.
arXiv Detail & Related papers (2020-02-18T16:45:09Z)
This list is automatically generated from the titles and abstracts of the papers in this site.
This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.