Antagonistic Bowden-Cable Actuation of a Lightweight Robotic Hand: Toward Dexterous Manipulation for Payload Constrained Humanoids

• URL: http://arxiv.org/abs/2512.24657v1
• Date: Wed, 31 Dec 2025 06:07:11 GMT
• Title: Antagonistic Bowden-Cable Actuation of a Lightweight Robotic Hand: Toward Dexterous Manipulation for Payload Constrained Humanoids
• Abstract summary: We present a lightweight anthropomorphic hand actuated by Bowden cables.<n>The design substantially reduces distal mass while maintaining anthropomorphic scale and dexterity.<n>Using the proposed methods, the hand assembly with a distal mass of 236g demonstrated reliable execution of dexterous tasks.
• Score: 4.320393382724067
• License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
• Abstract: Humanoid robots toward human-level dexterity require robotic hands capable of simultaneously providing high grasping force, rapid actuation speeds, multiple degrees of freedom, and lightweight structures within human-like size constraints. Meeting these conflicting requirements remains challenging, as satisfying this combination typically necessitates heavier actuators and bulkier transmission systems, significantly restricting the payload capacity of robot arms. In this letter, we present a lightweight anthropomorphic hand actuated by Bowden cables, which uniquely combines rolling-contact joint optimization with antagonistic cable actuation, enabling single-motor-per-joint control with negligible cable-length deviation. By relocating the actuator module to the torso, the design substantially reduces distal mass while maintaining anthropomorphic scale and dexterity. Additionally, this antagonistic cable actuation eliminates the need for synchronization between motors. Using the proposed methods, the hand assembly with a distal mass of 236g (excluding remote actuators and Bowden sheaths) demonstrated reliable execution of dexterous tasks, exceeding 18N fingertip force and lifting payloads over one hundred times its own mass. Furthermore, robustness was validated through Cutkosky taxonomy grasps and trajectory consistency under perturbed actuator-hand transformations.

Related papers

• Breaking speed scaling in quadrupedal robots via Huygens' coupled-pendulum dynamics [3.208498459001999]
  We show that superior locomotion can emerge from principled exploitation of intrinsic dynamics rather than brute-force hardware scaling.<n>A quadruped robot achieves a running speed of 10.74 m/s (Froude number 21.4) and completes a 100-meter sprint in 12.2 seconds.<n>These results establish inertial coupling as an underlying mechanism governing high-speed legged locomotion and highlight its role in reducing force requirements.
  arXiv  Detail & Related papers  (2026-09-09T10:58:20Z)
• Towards Human-level Dexterous Teleoperation [62.77371751776912]
  Human-level dexterous teleoperation requires precise control of object motion via dynamic hand-object contact.<n>We introduce TeleDexter, a hand-object co-tracking controller that maps operator intent into learned, low-level contact execution.<n>We evaluate TeleDexter on seven challenging dexterous teleoperation tasks spanning object reorientation and long-horizon tool use across two dexterous hands.
  arXiv  Detail & Related papers  (2026-07-13T12:36:47Z)
• DexLink Hand: A Compact, Affordable, 16-DOF Linkage-Driven Hand with Human-Like Dexterity [12.113461814653355]
  Low-cost linkage-driven anthropomorphic hand achieves high dexterity, structural integration, and human-hand-like functionality.<n>Hand integrates 20 joints driven by 16 independent actuators, with all actuation, sensing, and transmission components compactly embedded within a human-hand-sized structure.
  arXiv  Detail & Related papers  (2026-06-16T01:58:25Z)
• Learning Reactive Dexterous Grasping via Hierarchical Task-Space RL Planning and Joint-Space QP Control [50.28263951510334]
  We propose a hybrid hierarchical control framework for reactive dexterous grasping.<n>The proposed framework explicitly decouples high-level spatial intent from low-level joint execution.<n>We extensively validate the proposed framework through a rigorous simulation-to-reality pipeline.
  arXiv  Detail & Related papers  (2026-05-05T04:49:38Z)
• Time-Division Multiplexing Actuation in Tendon-Driven Arms: Lightweight Design and Fault Tolerance [14.371753469050942]
  Time-Division Multiplexing Actuation (TDMA) is a practical approach for tendon-driven robots.<n>MuxArm achieves a self-weight of 2.17 kg, supports an actuator driving capacity of 10 kg, and maintains end-effector accuracy up to 1% of its length.
  arXiv  Detail & Related papers  (2026-04-18T07:27:45Z)
• Robotic Dexterous Manipulation via Anisotropic Friction Modulation using Passive Rollers [4.9697268424579635]
  Controlling friction at the fingertip is fundamental to dexterous manipulation, yet remains difficult to realize in robotic hands.<n>We present the design and analysis of a robotic fingertip equipped with passive rollers that can be selectively braked or pivoted to modulate contact friction and constraint directions.<n>Results demonstrate the versatility of passive roller fingertips as a low-complexity, mechanically efficient approach to friction modulation, advancing the development of more adaptable and robust robotic manipulation.
  arXiv  Detail & Related papers  (2026-03-29T00:05:53Z)
• Safe Whole-Body Loco-Manipulation via Combined Model and Learning-based Control [46.47619556874003]
  We propose a whole-body controller that combines a model-based admittance control for the manipulator arm with a Reinforcement Learning policy for legged locomotion.<n>The admittance controller maps external wrenches--such as those applied by a human during physical interaction--into desired end-effector velocities, allowing for compliant behavior.<n>We validate our approach in both simulation and hardware using the Unitree Go2 quadruped robot with a 6-DoF arm and wrist-mounted 6-DoF Force/Torque sensor.
  arXiv  Detail & Related papers  (2026-03-02T22:31:12Z)
• Enabling High-Curvature Navigation in Eversion Robots through Buckle-Inducing Constrictive Bands [6.456672165305407]
  We propose a passive approach to reduce bending stiffness by introducing buckling points along the robot's outer wall.<n>We achieve this by integrating inextensible diameter-reducing circumferential bands at regular intervals along the robot body.<n> Experimental results demonstrate that these bands reduce the robot's stiffness when bent at the tip by up to 91 percent.
  arXiv  Detail & Related papers  (2026-01-18T18:12:51Z)
• DSO-VSA: a Variable Stiffness Actuator with Decoupled Stiffness and Output Characteristics for Rehabilitation Robotics [11.174959557114532]
  This paper presents a variable stiffness actuator featuring decoupled stiffness and output behavior for rehabilitation robotics.<n>The system integrates a variable stiffness mechanism that combines a variable-length lever with a hypocycloidal straight-line mechanism to achieve a linear torque-deflection relationship.<n>A cascade PI controller is further developed on the basis of the differential configuration, in which the position-loop term jointly regulates stiffness and deflection angle.
  arXiv  Detail & Related papers  (2025-12-21T12:13:17Z)
• CHIP: Adaptive Compliance for Humanoid Control through Hindsight Perturbation [70.5382178207975]
  hIsight Perturbation (CHIP) is a plug-and-play module that enables controllable end-effector stiffness.<n>CHIP is easy to implement and requires neither data augmentation nor additional reward tuning.<n>We show that a generalist motion-tracking controller trained with CHIP can perform a diverse set of forceful manipulation tasks.
  arXiv  Detail & Related papers  (2025-12-16T18:56:04Z)
• Development of the Bioinspired Tendon-Driven DexHand 021 with Proprioceptive Compliance Control [10.382085972192723]
  This letter presents Dex-Hand 021, a high-performance, cable-driven five-finger robotic hand with 12 active and 7 passive degrees of freedom (DoFs)<n>We propose a proprioceptive force-sensing-based admittance control method to enhance manipulation.<n> Experimental results demonstrate its superior performance: a single-finger load capacity exceeding 10 N, repeatability under 0.001 m, and force estimation errors below 0.2 N.
  arXiv  Detail & Related papers  (2025-11-05T14:07:03Z)
• A High-Force Gripper with Embedded Multimodal Sensing for Powerful and Perception Driven Grasping [12.351326520775464]
  We develop a modular high grasping force gripper equipped with embedded multi-modal perception functionalities.<n>The proposed gripper can generate a grasping force of 110 N in a compact implementation.<n>The high grasping force capability is combined with embedded multi-modal sensing, which includes an eye-in-hand camera, a Time-of-Flight (ToF) distance sensor, an Inertial Measurement Unit (IMU) and an omnidirectional microphone.
  arXiv  Detail & Related papers  (2025-04-07T11:57:08Z)
• Humanoid Whole-Body Locomotion on Narrow Terrain via Dynamic Balance and Reinforcement Learning [54.26816599309778]
  We propose a novel whole-body locomotion algorithm based on dynamic balance and Reinforcement Learning (RL)<n> Specifically, we introduce a dynamic balance mechanism by leveraging an extended measure of Zero-Moment Point (ZMP)-driven rewards and task-driven rewards in a whole-body actor-critic framework.<n> Experiments conducted on a full-sized Unitree H1-2 robot verify the ability of our method to maintain balance on extremely narrow terrains.
  arXiv  Detail & Related papers  (2025-02-24T14:53:45Z)
• VAE-Loco: Versatile Quadruped Locomotion by Learning a Disentangled Gait Representation [78.92147339883137]
  We show that it is pivotal in increasing controller robustness by learning a latent space capturing the key stance phases constituting a particular gait. We demonstrate that specific properties of the drive signal map directly to gait parameters such as cadence, footstep height and full stance duration. The use of a generative model facilitates the detection and mitigation of disturbances to provide a versatile and robust planning framework.
  arXiv  Detail & Related papers  (2022-05-02T19:49:53Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.