Tendon-Driven Reciprocating and Non-Reciprocating Motion via Snapping Metabeams

• URL: http://arxiv.org/abs/2602.18330v1
• Date: Fri, 20 Feb 2026 16:35:51 GMT
• Title: Tendon-Driven Reciprocating and Non-Reciprocating Motion via Snapping Metabeams
• Abstract summary: A tendon-driven mechanism consisting of spiral-based metabeams was developed for producing both reciprocating and non-reciprocating motion.<n>The spiral geometry allows large reversible deformation even when made from a relatively stiff material such as PLA.<n>The developed mechanism was further integrated into a swimming robot, where tendon-driven fins exhibited two distinct actuation modes.
• Score: 0.0
• License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
• Abstract: Snapping beams enable rapid geometric transitions through nonlinear instability, offering an efficient means of generating motion in soft robotic systems. In this study, a tendon-driven mechanism consisting of spiral-based metabeams was developed to exploit this principle for producing both reciprocating and non-reciprocating motion. The snapping structures were fabricated using fused deposition modeling with polylactic acid (PLA) and experimentally tested under different boundary conditions to analyze their nonlinear behavior. The results show that the mechanical characteristics, including critical forces and stability, can be tuned solely by adjusting the boundary constraints. The spiral geometry allows large reversible deformation even when made from a relatively stiff material such as PLA, providing a straightforward design concept for controllable snapping behavior. The developed mechanism was further integrated into a swimming robot, where tendon-driven fins exhibited two distinct actuation modes: reciprocating and non-reciprocating motion. The latter enabled efficient propulsion, producing a forward displacement of about 32 mm per 0.4 s cycle ($\approx$ 81 mm/s, equivalent to 0.4 body lengths per second). This study highlights the potential of geometry-driven snapping structures for efficient and programmable actuation in soft robotic systems.

Related papers

• Friction Characterization of a Cable-Driven Differential Actuation System for Lower-Limb Exoskeletons [42.628421392139]
  Lower-limb exoskeletons require actuation systems that can provide accurate joint torque control.<n> Conventional architectures often rely on independently actuated joints and joint-level torque sensors.<n>This paper presents a novel differential actuation architecture for hip-knee flexion/extension.
  arXiv  Detail & Related papers  (2026-06-14T19:47:32Z)
• Design of an In-Pipe Robot with Contact-Angle-Guided Kinematic Decoupling for Crosstalk-Suppressed Locomotion [20.379309593600414]
  In-pipe inspection robots must traverse confined pipeline networks with elbows and three-dimensional fittings.<n>In compact V-shaped platforms, these functions often rely on shared contacts or indirect actuation.<n>This paper presents a V-shaped in-pipe robot with a joint-axis-and-wheel-separation layout that provides two physically independent actuation channels.
  arXiv  Detail & Related papers  (2026-03-28T11:40:36Z)
• Tendon-Actuated Robots with a Tapered, Flexible Polymer Backbone: Design, Fabrication, and Modeling [0.4983856330186121]
  3D-printed, tendon-actuated continuum robots featuring a flexible, tapered backbone constructed from thermoplastic polyurethane (TPU)<n>Our scalable design incorporates an integrated electronics base housing that enables direct tendon tension control and sensing via actuators and compression load cells.
  arXiv  Detail & Related papers  (2026-03-19T16:46:00Z)
• When Rolling Gets Weird: A Curved-Link Tensegrity Robot for Non-Intuitive Behavior [0.6372261626436676]
  This research presents a solution with a semi-circular, curved-link tensegrity robot.<n>The robot strikes a balance between efficient rolling locomotion and controlled stability, enabled by discontinuities at the arc endpoints.<n>A preliminary impact test highlights the tensegrity structure's inherent shock absorption capabilities and conformability.
  arXiv  Detail & Related papers  (2026-03-17T13:30:33Z)
• From Folding Mechanics to Robotic Function: A Unified Modeling Framework for Compliant Origami [13.163657221687599]
  We introduce a geometry consistent modeling framework based on discrete differential geometry (DDG)<n>This framework unifies panel elasticity and crease rotation within a single variational formulation.<n>This unified description enables programmable control of stability and deformation across rigid and compliant regimes.
  arXiv  Detail & Related papers  (2026-03-16T07:03:39Z)
• Shape Control of a Planar Hyper-Redundant Robot via Hybrid Kinematics-Informed and Learning-based Approach [42.55947704321053]
  Hyper-redundant robots offer high dexterity, making them good at operating in confined and unstructured environments.<n>To extend the reachable workspace, we built a multi-segment flexible rack actuated planar robot.<n>We propose a hybrid kinematics-informed and learning-based shape control method, named SpatioCoupledNet.
  arXiv  Detail & Related papers  (2026-03-11T04:35:06Z)
• Snapping Actuators with Asymmetric and Sequenced Motion [6.7646973106436254]
  A compact quadrupedal robot achieves coordinated wavelike locomotion using only a single pressure input.<n>The robot exhibits frequency-dependent performance with a maximum speed of 72.78mm/s at 7.5Hz.
  arXiv  Detail & Related papers  (2026-02-20T18:45:17Z)
• Dynamic Modeling and MPC for Locomotion of Tendon-Driven Soft Quadruped [0.0]
  SLOT (Soft Legged Omnidirectional Tetrapod) is a tendon-driven soft quadruped robot with 3D-printed TPU legs.<n>Each leg is modeled as a deformable continuum using discrete Cosserat rod theory.<n>A modular whole-body modeling framework is introduced, in which compliant leg dynamics are represented.
  arXiv  Detail & Related papers  (2026-02-18T11:14:22Z)
• Programmable Deformation Design of Porous Soft Actuator through Volumetric-Pattern-Induced Anisotropy [1.3464152928754487]
  A novel design method is presented to realize soft porous actuators with programmable deformation by incising specific patterns into the porous foam body.<n>Our work provides a new, efficient, and scalable paradigm for the design of multi-functional soft porous robots.
  arXiv  Detail & Related papers  (2025-12-13T13:17:17Z)
• Spatial-Temporal Graph Diffusion Policy with Kinematic Modeling for Bimanual Robotic Manipulation [88.83749146867665]
  Existing approaches learn a policy to predict a distant next-best end-effector pose.<n>They then compute the corresponding joint rotation angles for motion using inverse kinematics.<n>We propose Kinematics enhanced Spatial-TemporAl gRaph diffuser.
  arXiv  Detail & Related papers  (2025-03-13T17:48:35Z)
• Differentiable Physics-based System Identification for Robotic Manipulation of Elastoplastic Materials [43.99845081513279]
  This work introduces a novel Differentiable Physics-based System Identification (DPSI) framework that enables a robot arm to infer the physics parameters of elastoplastic materials and the environment using simple manipulation motions and incomplete 3D point clouds.<n>With only a single real-world interaction, the estimated parameters can accurately simulate visually and physically realistic behaviours induced by unseen and long-horizon manipulation motions.
  arXiv  Detail & Related papers  (2024-11-01T13:04:25Z)
• Differentiable Simulation of Soft Multi-body Systems [99.4302215142673]
  We develop a top-down matrix assembly algorithm within Projective Dynamics. We derive a differentiable control framework for soft articulated bodies driven by muscles, joint torques, or pneumatic tubes.
  arXiv  Detail & Related papers  (2022-05-03T20:03:22Z)
• VAE-Loco: Versatile Quadruped Locomotion by Learning a Disentangled Gait Representation [78.92147339883137]
  We show that it is pivotal in increasing controller robustness by learning a latent space capturing the key stance phases constituting a particular gait. We demonstrate that specific properties of the drive signal map directly to gait parameters such as cadence, footstep height and full stance duration. The use of a generative model facilitates the detection and mitigation of disturbances to provide a versatile and robust planning framework.
  arXiv  Detail & Related papers  (2022-05-02T19:49:53Z)
• Euclideanizing Flows: Diffeomorphic Reduction for Learning Stable Dynamical Systems [74.80320120264459]
  We present an approach to learn such motions from a limited number of human demonstrations. The complex motions are encoded as rollouts of a stable dynamical system. The efficacy of this approach is demonstrated through validation on an established benchmark as well demonstrations collected on a real-world robotic system.
  arXiv  Detail & Related papers  (2020-05-27T03:51:57Z)
• Cat states in a driven superfluid: role of signal shape and switching protocol [62.997667081978825]
  We investigate the behavior of a one-dimensional Bose-Hubbard model whose kinetic energy is made to oscillate with zero time-average. We analyze the robustness of this unconventional ground state against variations of a number of system parameters.
  arXiv  Detail & Related papers  (2020-05-11T15:15:06Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.