Topology-Optimized Pneumatic Soft Actuator: Design and Experimental Validation

• URL: http://arxiv.org/abs/2605.20101v1
• Date: Tue, 19 May 2026 16:52:49 GMT
• Title: Topology-Optimized Pneumatic Soft Actuator: Design and Experimental Validation
• Abstract summary: An existing density- and porohyperelasticity-based topology optimization framework was extended from 2D to 3D.<n>The objective was to maximize the bending response for a prescribed actuation pressure under two different strain limits.<n>The two optimized 3D designs were fabricated using stereolithography and experimentally tested to validate their performance.
• Score: 0.0
• License: http://creativecommons.org/licenses/by/4.0/
• Abstract: This paper demonstrates the computational design of soft elastomeric pneumatic actuators using nonlinear topology optimization. An existing density- and porohyperelasticity-based topology optimization framework was extended from 2D to 3D and used to generate two manufacturable actuator designs, which were then studied numerically and experimentally. For both designs, the objective was to maximize the bending response for a prescribed actuation pressure under two different allowable strain limits. A key advantage of the employed topology optimization framework is that it can consistently, during the optimization, account for the very large deformations induced upon pressurization. The two optimized 3D designs were fabricated using stereolithography and experimentally tested to validate their performance.

Related papers

• Influence of Extruded Filament Shape on Buildability in 3D Concrete Printing: A Geometry-Informed Deep Learning-FEM Approach [0.601977707672242]
  The geometric morphology of deposited filaments can significantly influence the structural performance and stability of 3D concrete-printed structures.<n>FEM-based approaches for buildability assessment represent printed layers as simplified, potentially limiting predictive accuracy.<n>This study proposes a geometry-informed modelling framework that integrates the deep-learning-based filament shape prediction tool ShapeGen3DCP.
  arXiv  Detail & Related papers  (2026-09-03T16:08:19Z)
• A Defense of the Quadratic Model [71.57026347416729]
  We stress test the simplest possible model of optimization -- the quadratic model.<n>We show that it can be predictive surprisingly in an LLM setting with 150M parameters and 3B training tokens.
  arXiv  Detail & Related papers  (2026-07-23T18:02:03Z)
• Diff3R: Feed-forward 3D Gaussian Splatting with Uncertainty-aware Differentiable Optimization [76.38917994186733]
  Diff3R is a novel framework that bridges feed-forward prediction and test-time optimization.<n>We show that it can be seamlessly integrated into existing feed-forward 3DGS architectures for both pose-given and pose-free methods.
  arXiv  Detail & Related papers  (2026-04-01T15:40:20Z)
• Optimization and Generation in Aerodynamics Inverse Design [41.756961128464816]
  Inverse design with physics-based objectives is challenging because it couples high-dimensional geometry with expensive simulations.<n>We revisit inverse design through two canonical solutions, the optimal design point and the optimal design distribution.<n>We propose a new training loss for cost predictors and a density-gradient optimization method that improves objectives while preserving plausible shapes.
  arXiv  Detail & Related papers  (2026-02-03T14:32:26Z)
• Fractional-order Modeling for Nonlinear Soft Actuators via Particle Swarm Optimization [49.34452620841728]
  This paper proposes an innovative modeling framework based on fractional-order differential equations (FODEs) to capture the dynamic behavior of soft materials.<n>The proposed approach effectively represents the complex deformation phenomena inherent in soft actuators.
  arXiv  Detail & Related papers  (2025-12-20T04:46:25Z)
• 3DID: Direct 3D Inverse Design for Aerodynamics with Physics-Aware Optimization [53.40777496077015]
  Inverse design aims to design the input variables of a physical system to optimize a specified objective function.<n>In 3D domains, the design space grows exponentially, rendering exhaustive grid-based searches infeasible.<n>We propose a 3D Inverse Design framework that directly navigates the 3D design space by coupling a continuous latent representation with a physics-aware optimization strategy.
  arXiv  Detail & Related papers  (2025-12-06T13:09:03Z)
• ShapeGen3DCP: A Deep Learning Framework for Layer Shape Prediction in 3D Concrete Printing [0.4666493857924357]
  This work introduces ShapeGen3DCP, a deep learning framework for prediction of filament cross-sectional geometry in 3D Concrete Printing (3DCP)<n>The framework is based on a neural network architecture that takes as input both material properties in the fluid state (density, yield stress, plastic viscosity) and process parameters (nozzle diameter, nozzle height, printing and flow velocities) to directly predict extruded layer shapes.<n>The training dataset was synthetically generated using a well-established Particle Finite Element (PFEM) model of 3DCP, overcoming the scarcity of experimental data.
  arXiv  Detail & Related papers  (2025-10-02T13:30:20Z)
• Efficient Design of Compliant Mechanisms Using Multi-Objective Optimization [50.24983453990065]
  We address the synthesis of a compliant cross-hinge mechanism capable of large angular strokes.<n>We formulate a multi-objective optimization problem based on kinetostatic performance measures.
  arXiv  Detail & Related papers  (2025-04-23T06:29:10Z)
• Free-form Grid Structure Form Finding based on Machine Learning and Multi-objective Optimisation [5.381203326687129]
  Current free-form form-finding methods cannot adequately meet the material properties, structural requirements or construction conditions. This paper aims to improve the rationality of free-form morphology considering multiple objectives in line with the characteristics and constraints of material.
  arXiv  Detail & Related papers  (2024-07-13T11:22:12Z)
• Flexible Isosurface Extraction for Gradient-Based Mesh Optimization [65.76362454554754]
  This work considers gradient-based mesh optimization, where we iteratively optimize for a 3D surface mesh by representing it as the isosurface of a scalar field. We introduce FlexiCubes, an isosurface representation specifically designed for optimizing an unknown mesh with respect to geometric, visual, or even physical objectives.
  arXiv  Detail & Related papers  (2023-08-10T06:40:19Z)
• DEBOSH: Deep Bayesian Shape Optimization [48.80431740983095]
  We propose a novel uncertainty-based method tailored to shape optimization. It enables effective BO and increases the quality of the resulting shapes beyond that of state-of-the-art approaches.
  arXiv  Detail & Related papers  (2021-09-28T11:01:42Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.