Manipulider: A Multi-Engine Buoyancy-Controlled Robot for Thrusterless Underwater Gliding and Manipulation

• URL: http://arxiv.org/abs/2606.21461v1
• Date: Fri, 19 Jun 2026 14:16:57 GMT
• Title: Manipulider: A Multi-Engine Buoyancy-Controlled Robot for Thrusterless Underwater Gliding and Manipulation
• Abstract summary: The Manipulider is a buoyancy-actuated underwater robot.<n>It enables thrusterless, glide-like locomotion and attitude-based manipulation.<n>Four syringe-based buoyancy engines regulate net buoyancy and the center of buoyancy.
• Score: 24.80183425217753
• License: http://creativecommons.org/licenses/by/4.0/
• Abstract: The Manipulider is a buoyancy-actuated underwater robot that enables thrusterless, glide-like locomotion and attitude-based manipulation, while providing a magnetic modular interface for rapid payload swapping (e.g., a gripper or sensors). Four syringe-based buoyancy engines distributed around the body jointly regulate net buoyancy and the center of buoyancy, allowing the vehicle to maintain large tilt angles through static force balance without continuous thrust and to avoid propeller entanglement risks. We present the mechanical and electrical design, calibration procedure, and control architecture. Experiments with a gripper attached (no external payload) show a controllable buoyancy-displacement range of 40 mL per engine ({\approx}160 g total buoyancy authority), maximum statically stable tilts of 64.6° (single-engine) and 61.8° (dual-engine), and representative vertical and tilt-transition dynamics. We further demonstrate tilt regulation, controlled ascent/descent primitives, and a proof-of-concept gripper-based payload-transport sequence without thrusters.

Related papers

• Effector-Centric NMPC of Tiltable-Multirotors for Offset-Free Omnidirectional Aerial Manipulation [9.325443556436436]
  This work presents a design analysis and a wrench-based control framework for tiltable-multirotors in aerial manipulation.<n>A four-rotor tiltable configuration provides a balance between interference-free propeller sizing and hovering efficiency.<n>We develop an effector-centric nonlinear model predictive control framework that integrates design choices, handling, and disturbance compensation.
  arXiv  Detail & Related papers  (2026-08-18T14:18:48Z)
• MorphQuad: Morphable Quadrotor for Superhuman Maneuverability, Manipulation, and Resiliency [0.0]
  Infrastructure maintenance, contact-based inspection, and emergency response can benefit from aerial vehicles that act as a flying human hand.<n>MMR: maneuverability to fly in arbitrary orientations to reach remote and tight locations.<n>We present MorphQuad: a morphable quadrotor that enjoys MMR.
  arXiv  Detail & Related papers  (2026-07-02T21:01:26Z)
• A Multimodal Tiltwing Framework for Bioinspired Aerial Robots [0.7734726150561088]
  Tailless flapping-wing micro-aerial vehicles (FWMAVs) mimic the impressive flight performance of hummingbirds.<n>Existing designs are still limited and purpose-built with a restricted flight envelope and poor endurance.<n>We propose an adaptable tiltwing framework enabling bioinspired aerial robots to switch between hovering flight, high-speed directional flight, and energy-efficient flight.
  arXiv  Detail & Related papers  (2026-06-20T13:59:36Z)
• HoLoArm: Deformable Arms for Collision-Tolerant Quadrotor Flight [46.42648821424623]
  We present HoLoArm, a quadrotor with compliant arms inspired by the nodus structure of dragonfly wings.<n>Results demonstrate that HoLoArm can passively deform in any direction, including axial one, and recover within 0.3-0.6 s depending on the direction and level of the impact.<n>Drone can survive collisions at speeds up to 7.6 m/s and carry a 540 g payload while maintaining stable flight.
  arXiv  Detail & Related papers  (2026-05-25T12:37:18Z)
• Aero-World: Action-Conditioned Aerial Video Generation from Inertial Controls [57.166020875486474]
  We propose textbfAero-World, a method for converting a pretrained image-to-video diffusion model into a controllable aerial video generator.<n>A frozen latent-space Physics Probe, trained independently on real video--IMU pairs, provides differentiable inertial-consistency supervision during LoRA finetuning.<n>On AeroBench, Aero-World improves mean AAS from 57.7 to 63.6 over action-only finetuning and gives a stronger quality-control trade-off than AirScape.
  arXiv  Detail & Related papers  (2026-05-19T12:02:17Z)
• A Lightweight Toggleable Adhesion Prototype for Multirotor UAV Landing on Tilting Platforms [0.0]
  This paper presents a lightweight toggleable adhesion mechanism to improve landing reliability.<n>The system uses a motor-driven corkscrew that engages hook-and-loop material on the landing surface.<n>Using only a simple vertical PID controller, the proposed approach increases landing success from an average of 40% (baseline) to 80% across platform tilts up to 43 degrees.
  arXiv  Detail & Related papers  (2026-04-24T23:58:40Z)
• Dynamic Modeling and Attitude Control of a Reaction-Wheel-Based Low-Gravity Bipedal Hopper [0.0]
  hopping locomotion offers high energy efficiency but is prone to mid-flight attitude instability.<n>This paper presents an underactuated bipedal hopping robot that employs an internal reaction wheel to regulate body posture.<n>The proposed framework is evaluated in MuJoCo-based simulations under lunar gravity conditions.
  arXiv  Detail & Related papers  (2026-03-11T11:35:21Z)
• Design, Modeling and Direction Control of a Wire-Driven Robotic Fish Based on a 2-DoF Crank-Slider Mechanism [7.409300331963032]
  We develop a wire-driven robotic fish equipped with a crank-slider mechanism that decouples propulsion from steering.<n>We propose a combined feedforward-feedback control strategy to achieve independent regulation of propulsion and steering.
  arXiv  Detail & Related papers  (2026-03-03T10:55:45Z)
• A 26-Gram Butterfly-Inspired Robot Achieving Autonomous Tailless Flight [61.21669716392821]
  textitAirPulse is a 26-gram butterfly-inspired robot that achieves the first onboard, closed-loop controlled flight for a tailless two-winged platform at this scale.<n>It replicates key biomechanical traits of butterfly flight, utilizing low-aspect-ratio, compliant carbon-fiber-reinforced wings and low-frequency flapping that reproduces characteristic biological body undulations.
  arXiv  Detail & Related papers  (2026-02-06T15:58:50Z)
• HUSKY: Humanoid Skateboarding System via Physics-Aware Whole-Body Control [67.58927286226925]
  We propose a learning-based framework that integrates humanoid-skateboard system modeling and physics-aware whole-body control.<n>Experiments on the Unitree G1 humanoid platform demonstrate that our framework enables stable and agile maneuvering on skateboards in real-world scenarios.
  arXiv  Detail & Related papers  (2026-02-03T07:18:01Z)
• TriphiBot: A Triphibious Robot Combining FOC-based Propulsion with Eccentric Design [9.930529399697557]
  Triphibious robots capable of multi-domain motion are promising to handle complex tasks across diverse environments.<n>Existing designs primarily focus on dual-mode platforms, and some designs suffer from high mechanical complexity or low propulsion efficiency.<n>We propose a novel triphibious robot capable of aerial, terrestrial, and aquatic motion, by a minimalist design combining a quadcopter structure with two passive wheels.
  arXiv  Detail & Related papers  (2026-02-01T18:38:22Z)
• Wake Vectoring for Efficient Morphing Flight [1.6799377888527687]
  We introduce a passive wake vectoring mechanism that recovers lost thrust during morphing.<n>This solution achieves up to a 40% recovery of vertical thrust in configurations where no useful thrust would otherwise be produced.<n>Our findings highlight a new direction for morphing aerial robot design, where passive aerodynamic structures, inspired by thrust vectoring in rockets and aircraft, enable efficient, agile flight without added mechanical complexity.
  arXiv  Detail & Related papers  (2025-12-04T19:31:17Z)
• Learning a Single Near-hover Position Controller for Vastly Different Quadcopters [56.37274861303324]
  This paper proposes an adaptive near-hover position controller for quadcopters. It can be deployed to quadcopters of very different mass, size and motor constants. It also shows rapid adaptation to unknown disturbances during runtime.
  arXiv  Detail & Related papers  (2022-09-19T17:55:05Z)
• VAE-Loco: Versatile Quadruped Locomotion by Learning a Disentangled Gait Representation [78.92147339883137]
  We show that it is pivotal in increasing controller robustness by learning a latent space capturing the key stance phases constituting a particular gait. We demonstrate that specific properties of the drive signal map directly to gait parameters such as cadence, footstep height and full stance duration. The use of a generative model facilitates the detection and mitigation of disturbances to provide a versatile and robust planning framework.
  arXiv  Detail & Related papers  (2022-05-02T19:49:53Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.