Real-Time Compliance and Position Control of a Hyper-redundant Soft Robotic Arm

• URL: http://arxiv.org/abs/2606.29731v1
• Date: Mon, 29 Jun 2026 03:12:57 GMT
• Title: Real-Time Compliance and Position Control of a Hyper-redundant Soft Robotic Arm
• Abstract summary: This paper presents a robot architecture designed around that control problem.<n>The rigid articulated backbone makes the tip compliance and position of the arm predictable.<n>The arm demonstrates tasks that have been difficult for both rigid and soft arms.
• Score: 1.856390765856703
• License: http://creativecommons.org/licenses/by/4.0/
• Abstract: Robots working in unstructured or partially unobservable environments must combine accurate motion with physical compliance that can passively correct contact misalignment. Soft robots provide this compliance but have struggled to precisely control their tip compliance and position. This paper presents a robot architecture designed around that control problem: a 7-link arm whose six articulated joints provide twelve independently driven revolute axes, each actuated by an antagonistic pair of pneumatic muscles, so that every axis can simultaneously change its angle and linearly adjust its stiffness. The rigid articulated backbone makes the tip compliance and position of the arm predictable enough to be commanded quantitatively in real time. The robot employs a unified iterative inverse-kinematics and inverse-compliance controller to achieve simultaneous, quantitative control of both compliance and position. The task-space compliance and kinematics models and the control law are derived and verified on both the physical arm and a matched simulation. Simulation is then used to study how the same framework extends to other arm morphologies. Finally, the arm demonstrates tasks that have been difficult for both rigid and soft arms: rejecting disturbances while writing on a moving whiteboard, and passively correcting hidden misalignment during a key-insertion and drawer-opening task. That these tasks succeed under so straightforward a controller is evidence for the advantage of this algorithm-informed structural design.

Related papers

• CosmoH2G: A Hand-to-Gripper Transfer Dataset and Baseline Method for Object Manipulation with Complex Spatial Movements [63.40365657068892]
  Transferring human hand demonstrations to robotic grippers has recently emerged as a cost-effective solution for robot learning.<n>Motivated by this gap, we adopt an implicit, data-driven approach guided by fine-grained hand-pose motions.<n>In both simulation and real-robot experiments, our framework enables stable and precise hand-to-gripper transfer of complex spatial manipulations.
  arXiv  Detail & Related papers  (2026-09-07T13:47:22Z)
• Morphology and actuation as inductive biases in robotic hand manipulation [0.0]
  A unified framework is presented in which the kinematic and actuation stages are analysed separately and in composition.<n>It is applied to two hands representing opposing design philosophies, the Shadow Dexterous Hand and the Anatomically Correct, Biomechatronic Hand.<n>All parameters are derived from the hands' canonical digital representations.
  arXiv  Detail & Related papers  (2026-09-04T14:38:13Z)
• Force/Torque-Based Kinematic Adaptation for Robotic Manipulation Tasks [0.0]
  Contact-rich robotic manipulation requires an accurate model of the kinematic relationship between a robot's joints and the task it senses.<n>This paper develops an adaptive scheme that estimates that relationship online, using only joint-angle sensing and a wrist-mounted force/torque sensor.
  arXiv  Detail & Related papers  (2026-08-21T19:51:53Z)
• Morphology-Specific Closed-Loop Control of Logarithmic-Spiral Continuum Arms via Online Jacobian Error Compensation [9.759803937074699]
  Recently reported logarithmic-spiral robots demonstrated scalable fabrication and versatile grasping but lacked inverse kinematics and closed-loop control.<n>This work presents the first morphology-specific closed-loop task-space control framework for logarithmic-spiral continuum arms.<n>Results demonstrate that combining logarithmic-spiral morphology with online Jacobian compensation enables accurate, robust, and scalable control of highly underactuated continuum manipulators.
  arXiv  Detail & Related papers  (2026-06-24T13:54:23Z)
• Learning Reactive Dexterous Grasping via Hierarchical Task-Space RL Planning and Joint-Space QP Control [50.28263951510334]
  We propose a hybrid hierarchical control framework for reactive dexterous grasping.<n>The proposed framework explicitly decouples high-level spatial intent from low-level joint execution.<n>We extensively validate the proposed framework through a rigorous simulation-to-reality pipeline.
  arXiv  Detail & Related papers  (2026-05-05T04:49:38Z)
• Sim-to-Real Transfer for Muscle-Actuated Robots via Generalized Actuator Networks [53.12548325396181]
  Tendon drives paired with soft muscle actuation enable faster and safer robots.<n>We propose a sim-to-real pipeline that learns a neural network model of this complex actuation.<n>We successfully deploy precise goal-reaching and dynamic ball-in-a-cup policies trained entirely in simulation.
  arXiv  Detail & Related papers  (2026-04-10T16:52:54Z)
• Consistency-Driven Dual LSTM Models for Kinematic Control of a Wearable Soft Robotic Arm [33.333272339511446]
  We introduce a consistency-driven dual LSTM framework for accurately learning both the forward and inverse kinematics of a pneumatically actuated soft robotic arm integrated into a wearable device.<n>This approach effectively captures the nonlinear and hysteretic behaviors of soft pneumatic actuators while addressing the one-to-many mapping challenge between actuation inputs and end-effector positions.
  arXiv  Detail & Related papers  (2026-03-18T12:51:12Z)
• Safe Whole-Body Loco-Manipulation via Combined Model and Learning-based Control [46.47619556874003]
  We propose a whole-body controller that combines a model-based admittance control for the manipulator arm with a Reinforcement Learning policy for legged locomotion.<n>The admittance controller maps external wrenches--such as those applied by a human during physical interaction--into desired end-effector velocities, allowing for compliant behavior.<n>We validate our approach in both simulation and hardware using the Unitree Go2 quadruped robot with a 6-DoF arm and wrist-mounted 6-DoF Force/Torque sensor.
  arXiv  Detail & Related papers  (2026-03-02T22:31:12Z)
• Learning Agile and Robust Omnidirectional Aerial Motion on Overactuated Tiltable-Quadrotors [15.511018281264674]
  This work investigates reinforcement learning for omnidirectional aerial motion control on over-actuated tiltable quadrotors.<n>We present a learning-based control framework that enables efficient acquisition of coordinated rotor-joint behaviors for reaching target poses.
  arXiv  Detail & Related papers  (2026-02-25T05:13:25Z)
• Spatial-Temporal Graph Diffusion Policy with Kinematic Modeling for Bimanual Robotic Manipulation [88.83749146867665]
  Existing approaches learn a policy to predict a distant next-best end-effector pose.<n>They then compute the corresponding joint rotation angles for motion using inverse kinematics.<n>We propose Kinematics enhanced Spatial-TemporAl gRaph diffuser.
  arXiv  Detail & Related papers  (2025-03-13T17:48:35Z)
• Rethinking Bimanual Robotic Manipulation: Learning with Decoupled Interaction Framework [51.39847596489193]
  Bimanual robotic manipulation is an emerging and critical topic in the robotics community.<n>We propose a novel decoupled interaction framework that considers the characteristics of different tasks in bimanual manipulation.<n>Our framework achieves outstanding performance, with a 23.5% boost over the SOTA method.
  arXiv  Detail & Related papers  (2025-03-12T09:28:41Z)
• Learning Compliance Adaptation in Contact-Rich Manipulation [81.40695846555955]
  We propose a novel approach for learning predictive models of force profiles required for contact-rich tasks. The approach combines an anomaly detection based on Bidirectional Gated Recurrent Units (Bi-GRU) and an adaptive force/impedance controller.
  arXiv  Detail & Related papers  (2020-05-01T05:23:34Z)
• On robot compliance. A cerebellar control approach [0.0]
  The work presented here is a novel biological approach for the compliant control of a robotic arm in real time (RT) We integrate a spiking cerebellar network at the core of a feedback control loop performing torque-driven control. We prove that our compliant approach outperforms the accuracy of the default factory-installed position control in a set of tasks used for addressing cerebellar motor behavior.
  arXiv  Detail & Related papers  (2020-03-02T17:06:19Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.