MIRA: A Modular Open-Source Micro-UAV for Indoor Research

• URL: http://arxiv.org/abs/2607.11785v1
• Date: Mon, 13 Jul 2026 16:37:07 GMT
• Title: MIRA: A Modular Open-Source Micro-UAV for Indoor Research
• Abstract summary: MIRA (Modular Indoor Research Architecture) is a low-cost, open-source micro-UAV for indoor research built around a replicable 3D-printed PLA airframe.<n>We characterize MIRA through manual flight-control mode within an optical motion-capture volume, where the communication pipeline sustains a median companion-to-autopilot latency of 0.02 ms.
• Score: 0.6533458718563319
• License: http://creativecommons.org/licenses/by/4.0/
• Abstract: Indoor robotics research increasingly relies on micro-UAVs whose airframe, electronics, and control software are fully open to modification. Off-the-shelf platforms rarely expose the low-level access required for such modifications, while building a custom alternative typically requires substantial engineering effort before flight testing can begin, leaving many laboratories to work within constraints that limit the scope of their research. We present MIRA (Modular Indoor Research Architecture), a low-cost, open-source micro-UAV for indoor research built around a replicable 3D-printed PLA airframe and a containerized low-level software package managing the companion-to-autopilot communication bridge via Micro XRCE-DDS. Designed as a white-box architecture, core subsystems are individually replaceable without firmware refactoring, supporting local fabrication and component substitution from existing lab inventory. We characterize MIRA through manual flight in position-control mode within an optical motion-capture volume, where the communication pipeline sustains a median companion-to-autopilot latency of 0.02 ms and power spectral density analysis confirms the structural vibration energy stays concentrated in a narrow 90 to 110 Hz band, isolated from the sub-20 Hz control bandwidth and within the autopilot safety thresholds.

Related papers

• S$^3$AM: A Single-Stream SAM with Reliability-Calibrated Frequency Adapter for Multi-modal Salient Object Detection [74.15663758681849]
  Single-stream framework integrates reliability-calibrated frequency adaptation into the adopted SAM backbone for MSOD.<n>Experiments on RGB-D, RGB-T, and RGB-NIR salient object detection benchmarks validate that the proposed framework achieves competitive performance.
  arXiv  Detail & Related papers  (2026-08-18T08:05:00Z)
• COMB: Common Open Modular robotic platform for Bees [9.439165602070577]
  COMB is a compact, open-source, modular mechatronic platform designed for in-hive experiments within standard observation-hive frames.<n>The platform integrates a XY positioning stage, a Movable Access Window (MAW) for sealed tool access through the hive boundary, interchangeable payload modules, and an embedded control architecture that enables repeatable trajectory execution and signal generation.
  arXiv  Detail & Related papers  (2026-04-04T19:22:19Z)
• NanoBench: A Multi-Task Benchmark Dataset for Nano-Quadrotor System Identification, Control, and State Estimation [1.0312968200748118]
  Existing aerial-robotics benchmarks target vehicles from hundreds of grams to several kilograms and typically expose only high-level state data.<n>We introduce NanoBench, an open-source multi-task benchmark collected on the commercially available Crazyflie 2.1 nano-quadrotor (takeoff weight 27 g) in a Vicon motion capture arena.<n>The dataset contains over 170 flight trajectories spanning hover, multi-frequency aerodynamics, standard tracking, and aggressive maneuvers across multiple speed regimes.
  arXiv  Detail & Related papers  (2026-03-10T17:01:59Z)
• Autonomous Aerial Non-Destructive Testing: Ultrasound Inspection with a Commercial Quadrotor in an Unstructured Environment [2.518519330408713]
  This work presents an integrated control and software architecture that enables arguably the first fully autonomous, contact-based non-destructive testing (NDT) using a commercial multirotor.<n>We developed a real-time framework that interfaces directly with its onboard sensor suite.<n>We validate the system through physical experiments on a Flyability Elios 3rotor equipped with an ultrasound payload.
  arXiv  Detail & Related papers  (2026-03-04T22:09:20Z)
• A Unified Experimental Architecture for Informative Path Planning: from Simulation to Deployment with GuadalPlanner [69.43049144653882]
  This paper introduces a unified architecture that decouples high-level decision-making from vehicle-specific control.<n>The proposed architecture is realized through GuadalPlanner, which defines standardized interfaces between planning, sensing, and vehicle execution.
  arXiv  Detail & Related papers  (2026-02-11T10:02:31Z)
• NanoCockpit: Performance-optimized Application Framework for AI-based Autonomous Nanorobotics [50.594459728605734]
  Small form factor, i.e., a few 10s grams, severely limits onboard computational resources to sub-SI100milliwatt microcontroller units (MCUs)<n>Our framework achieves ideal end-to-end latency, i.e. zero overhead due to serialized tasks, delivering quantifiable improvements in closed-loop control performance.
  arXiv  Detail & Related papers  (2026-01-12T12:29:38Z)
• Control of Microrobots with Reinforcement Learning under On-Device Compute Constraints [5.456154853270863]
  An important function of autonomous microrobots is the ability to perform robust movement over terrain.<n>This paper explores an edge ML approach to microrobot locomotion, allowing for on-device, lower latency control under compute, memory, and power constraints.
  arXiv  Detail & Related papers  (2025-12-31T09:18:36Z)
• An Open Toolkit for Underwater Field Robotics [2.790023439255412]
  We introduce an open, cost-effective hardware and software toolkit for underwater manipulation research.<n>The toolkit includes a depth-rated Underwater Robotic Joint with early leakage detection, compact control and power management electronics, and a ROS2-based software stack for sensing and multi-mode actuation.<n>All CAD models, fabrication files, PCB sources, firmware, and ROS2 packages are openly released, enabling local manufacturing, modification, and community-driven improvement.
  arXiv  Detail & Related papers  (2025-12-17T17:06:35Z)
• AI/ML Life Cycle Management for Interoperable AI Native RAN [50.61227317567369]
  Artificial intelligence (AI) and machine learning (ML) models are rapidly permeating the 5G Radio Access Network (RAN)<n>These developments lay the foundation for AI-native transceivers as a key enabler for 6G.
  arXiv  Detail & Related papers  (2025-07-24T16:04:59Z)
• Efficient Real-time Smoke Filtration with 3D LiDAR for Search and Rescue with Autonomous Heterogeneous Robotic Systems [56.838297900091426]
  Smoke and dust affect the performance of any mobile robotic platform due to their reliance on onboard perception systems. This paper proposes a novel modular computation filtration pipeline based on intensity and spatial information.
  arXiv  Detail & Related papers  (2023-08-14T16:48:57Z)
• Ultra-low Power Deep Learning-based Monocular Relative Localization Onboard Nano-quadrotors [64.68349896377629]
  This work presents a novel autonomous end-to-end system that addresses the monocular relative localization, through deep neural networks (DNNs), of two peer nano-drones. To cope with the ultra-constrained nano-drone platform, we propose a vertically-integrated framework, including dataset augmentation, quantization, and system optimizations. Experimental results show that our DNN can precisely localize a 10cm-size target nano-drone by employing only low-resolution monochrome images, up to 2m distance.
  arXiv  Detail & Related papers  (2023-03-03T14:14:08Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.