GNN4REL: Graph Neural Networks for Predicting Circuit Reliability
Degradation
- URL: http://arxiv.org/abs/2208.02868v1
- Date: Thu, 4 Aug 2022 20:09:12 GMT
- Title: GNN4REL: Graph Neural Networks for Predicting Circuit Reliability
Degradation
- Authors: Lilas Alrahis, Johann Knechtel, Florian Klemme, Hussam Amrouch, Ozgur
Sinanoglu
- Abstract summary: We employ graph neural networks (GNNs) to accurately estimate the impact of process variations and device aging on the delay of any path within a circuit.
GNN4REL is trained on a FinFET technology model that is calibrated against industrial 14nm measurement data.
We successfully estimate delay degradations of all paths -- notably within seconds -- with a mean absolute error down to 0.01 percentage points.
- Score: 7.650966670809372
- License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
- Abstract: Process variations and device aging impose profound challenges for circuit
designers. Without a precise understanding of the impact of variations on the
delay of circuit paths, guardbands, which keep timing violations at bay, cannot
be correctly estimated. This problem is exacerbated for advanced technology
nodes, where transistor dimensions reach atomic levels and established margins
are severely constrained. Hence, traditional worst-case analysis becomes
impractical, resulting in intolerable performance overheads. Contrarily,
process-variation/aging-aware static timing analysis (STA) equips designers
with accurate statistical delay distributions. Timing guardbands that are
small, yet sufficient, can then be effectively estimated. However, such
analysis is costly as it requires intensive Monte-Carlo simulations. Further,
it necessitates access to confidential physics-based aging models to generate
the standard-cell libraries required for STA.
In this work, we employ graph neural networks (GNNs) to accurately estimate
the impact of process variations and device aging on the delay of any path
within a circuit. Our proposed GNN4REL framework empowers designers to perform
rapid and accurate reliability estimations without accessing transistor models,
standard-cell libraries, or even STA; these components are all incorporated
into the GNN model via training by the foundry. Specifically, GNN4REL is
trained on a FinFET technology model that is calibrated against industrial 14nm
measurement data. Through our extensive experiments on EPFL and ITC-99
benchmarks, as well as RISC-V processors, we successfully estimate delay
degradations of all paths -- notably within seconds -- with a mean absolute
error down to 0.01 percentage points.
Related papers
- Estimating Voltage Drop: Models, Features and Data Representation Towards a Neural Surrogate [1.7010199949406575]
We investigate how Machine Learning (ML) techniques can aid in reducing the computational effort and implicitly the time required to estimate the voltage drop in Integrated Circuits (ICs)
Our approach leverages ASICs' electrical, timing, and physical to train ML models, ensuring adaptability across diverse designs with minimal adjustments.
This study illustrates the effectiveness of ML algorithms in precisely estimating IR drop and optimizing ASIC sign-off.
arXiv Detail & Related papers (2025-02-07T21:31:13Z) - Variability-Aware Approximate Circuit Synthesis via Genetic Optimization [13.42152378784862]
One of the major barriers that CMOS devices face at nanometer scale is increasing parameter variation due to manufacturing imperfections.
Previous efforts impose pessimistic and performance-degrading timing guardbands atop the operating frequency.
We propose a circuit-agnostic automated framework for generating variability-aware approximate circuits.
arXiv Detail & Related papers (2023-12-23T18:29:26Z) - Knowing When to Stop: Delay-Adaptive Spiking Neural Network Classifiers with Reliability Guarantees [36.14499894307206]
Spiking neural networks (SNNs) process time-series data via internal event-driven neural dynamics.
We introduce a novel delay-adaptive SNN-based inference methodology that provides guaranteed reliability for the decisions produced at input-dependent stopping times.
arXiv Detail & Related papers (2023-05-18T22:11:04Z) - Physics Informed Neural Networks for Phase Locked Loop Transient
Stability Assessment [0.0]
Using power-electronic controllers, such as Phase Locked Loops (PLLs), to keep grid-tied renewable resources in synchronism with the grid can cause fast transient behavior during grid faults leading to instability.
This paper proposes a Neural Network algorithm that accurately predicts the transient dynamics of a controller under fault with less labeled training data.
The algorithm's performance is compared against a ROM and an EMT simulation in PSCAD for the CIGRE benchmark model C4.49, demonstrating its ability to accurately approximate trajectories and ROAs of a controller under varying grid impedance.
arXiv Detail & Related papers (2023-03-21T18:09:20Z) - Thales: Formulating and Estimating Architectural Vulnerability Factors
for DNN Accelerators [6.8082132475259405]
This paper focuses on quantifying the accuracy given that a transient error has occurred, which tells us how well a network behaves when a transient error occurs.
We show that existing Resiliency Accuracy (RA) formulation is fundamentally inaccurate, because it incorrectly assumes that software variables have equal faulty probability under hardware transient faults.
We present an algorithm that captures the faulty probabilities of DNN variables under transient faults and, thus, provides correct RA estimations validated by hardware.
arXiv Detail & Related papers (2022-12-05T23:16:20Z) - Green, Quantized Federated Learning over Wireless Networks: An
Energy-Efficient Design [68.86220939532373]
The finite precision level is captured through the use of quantized neural networks (QNNs) that quantize weights and activations in fixed-precision format.
The proposed FL framework can reduce energy consumption until convergence by up to 70% compared to a baseline FL algorithm.
arXiv Detail & Related papers (2022-07-19T16:37:24Z) - Fault-Aware Design and Training to Enhance DNNs Reliability with
Zero-Overhead [67.87678914831477]
Deep Neural Networks (DNNs) enable a wide series of technological advancements.
Recent findings indicate that transient hardware faults may corrupt the models prediction dramatically.
In this work, we propose to tackle the reliability issue both at training and model design time.
arXiv Detail & Related papers (2022-05-28T13:09:30Z) - Truncated tensor Schatten p-norm based approach for spatiotemporal
traffic data imputation with complicated missing patterns [77.34726150561087]
We introduce four complicated missing patterns, including missing and three fiber-like missing cases according to the mode-drivenn fibers.
Despite nonity of the objective function in our model, we derive the optimal solutions by integrating alternating data-mputation method of multipliers.
arXiv Detail & Related papers (2022-05-19T08:37:56Z) - Enhanced physics-constrained deep neural networks for modeling vanadium
redox flow battery [62.997667081978825]
We propose an enhanced version of the physics-constrained deep neural network (PCDNN) approach to provide high-accuracy voltage predictions.
The ePCDNN can accurately capture the voltage response throughout the charge--discharge cycle, including the tail region of the voltage discharge curve.
arXiv Detail & Related papers (2022-03-03T19:56:24Z) - Adaptive Anomaly Detection for Internet of Things in Hierarchical Edge
Computing: A Contextual-Bandit Approach [81.5261621619557]
We propose an adaptive anomaly detection scheme with hierarchical edge computing (HEC)
We first construct multiple anomaly detection DNN models with increasing complexity, and associate each of them to a corresponding HEC layer.
Then, we design an adaptive model selection scheme that is formulated as a contextual-bandit problem and solved by using a reinforcement learning policy network.
arXiv Detail & Related papers (2021-08-09T08:45:47Z) - Toward fast and accurate human pose estimation via soft-gated skip
connections [97.06882200076096]
This paper is on highly accurate and highly efficient human pose estimation.
We re-analyze this design choice in the context of improving both the accuracy and the efficiency over the state-of-the-art.
Our model achieves state-of-the-art results on the MPII and LSP datasets.
arXiv Detail & Related papers (2020-02-25T18:51:51Z)
This list is automatically generated from the titles and abstracts of the papers in this site.
This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.