Simple, High Saturation Power, Quantum-limited, RF SQUID Array-based Josephson Parametric Amplifiers

• URL: http://arxiv.org/abs/2402.19435v2
• Date: Tue, 21 May 2024 21:15:43 GMT
• Title: Simple, High Saturation Power, Quantum-limited, RF SQUID Array-based Josephson Parametric Amplifiers
• Authors: Ryan Kaufman, Chenxu Liu, Katarina Cicak, Boris Mesits, Mingkang Xia, Chao Zhou, Maria Nowicki, José Aumentado, David Pekker, Michael Hatridge,
• Abstract summary: High-fidelity quantum non-demolition qubit measurement is critical to error correction and rapid qubit feedback in quantum computing. We have developed a design pipeline that combines time-domain simulation of the un-truncated device Hamiltonian, fabrication constraints, and saturation power. We show that, despite the intensity of the pump, the device is quantum-efficient and capable of high-fidelity measurement limited by state transitions in the transmon.
• Score: 2.2808291856283103
• License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
• Abstract: High-fidelity quantum non-demolition qubit measurement is critical to error correction and rapid qubit feedback in large-scale quantum computing. High-fidelity readout requires passing a short and strong pulse through the qubit's readout resonator, which is then processed by a sufficiently high bandwidth, high saturation power, and quantum-limited amplifier. We have developed a design pipeline that combines time-domain simulation of the un-truncated device Hamiltonian, fabrication constraints, and maximization of saturation power. We have realized an amplifier based on a modified NIST tri-layer Nb fabrication suite which utilizes an array of 25 radio frequency Superconducting QUantum Interference Devices (rf SQUIDs) embedded within a low-Q resonator powered by a high-power voltage pump delivered via a diplexer on the signal port. We show that, despite the intensity of the pump, the device is quantum-efficient and capable of high-fidelity measurement limited by state transitions in the transmon. We present experimental data demonstrating up to -91.2 dBm input saturation power with 20 dB gain, up to 28 MHz instantaneous bandwidth, and phase-preserving qubit measurements with 62% quantum efficiency.

Related papers

• Selective Single and Double-Mode Quantum Limited Amplifier [0.0]
  A quantum-limited amplifier enables the amplification of weak signals while introducing minimal noise dictated by the principles of quantum mechanics. These amplifiers serve a broad spectrum of applications in quantum computing, including fast and accurate readout of superconducting qubits and spins. We experimentally develop a novel quantum-limited amplifier based on superconducting kinetic inductance.
  arXiv  Detail & Related papers  (2023-11-20T02:37:58Z)
• Broadband CPW-based impedance-transformed Josephson parametric amplifier [13.002501537530513]
  We present a device based on the broadband impedance-transformed Josephson parametric amplifier (IMPA) The device shows an instantaneous bandwidth of 700(200) MHz for 15(20) dB gain with an average saturation power of -110 dBm and near quantum-limited added noise.
  arXiv  Detail & Related papers  (2023-10-26T01:04:55Z)
• Design and simulation of a transmon qubit chip for Axion detection [103.69390312201169]
  Device based on superconducting qubits has been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND) In this study, we present Qub-IT's status towards the realization of its first superconducting qubit device.
  arXiv  Detail & Related papers  (2023-10-08T17:11:42Z)
• Demonstration of a Quantum Noise Limited Traveling-Wave Parametric Amplifier [0.0]
  Recent progress in quantum computing and the development of novel detector technologies for astrophysics is driving the need for high-gain, broadband, and quantum-limited amplifiers. We present a purely traveling-wave parametric amplifier (TWPA) using an inverted NbTiN microstrip and amorphous Silicon dielectric.
  arXiv  Detail & Related papers  (2023-06-19T15:45:55Z)
• Hyper-entanglement between pulse modes and frequency bins [101.18253437732933]
  Hyper-entanglement between two or more photonic degrees of freedom (DOF) can enhance and enable new quantum protocols. We demonstrate the generation of photon pairs hyper-entangled between pulse modes and frequency bins.
  arXiv  Detail & Related papers  (2023-04-24T15:43:08Z)
• Quantum emulation of the transient dynamics in the multistate Landau-Zener model [50.591267188664666]
  We study the transient dynamics in the multistate Landau-Zener model as a function of the Landau-Zener velocity. Our experiments pave the way for more complex simulations with qubits coupled to an engineered bosonic mode spectrum.
  arXiv  Detail & Related papers  (2022-11-26T15:04:11Z)
• An integrated microwave-to-optics interface for scalable quantum computing [47.187609203210705]
  We present a new design for an integrated transducer based on a superconducting resonator coupled to a silicon photonic cavity. We experimentally demonstrate its unique performance and potential for simultaneously realizing all of the above conditions. Our device couples directly to a 50-Ohm transmission line and can easily be scaled to a large number of transducers on a single chip.
  arXiv  Detail & Related papers  (2022-10-27T18:05:01Z)
• Broadband SNAIL parametric amplifier with microstrip impedance transformer [0.0]
  We present a quantum-limited 3-wave-mixing parametric amplifier based on superconducting nonlinear asymmetric inductive elements. operating in a current-pumped mode, we experimentally demonstrate an average gain of $17 dB$ across $300 MHz$ bandwidth. The amplifier can be fabricated using a simple technology with just a one e-beam lithography step.
  arXiv  Detail & Related papers  (2022-10-27T11:15:58Z)
• Readout of a quantum processor with high dynamic range Josephson parametric amplifiers [132.67289832617647]
  Device is matched to the 50 $Omega$ environment with a bandwidth of 250-300 MHz, with input saturation powers up to -95 dBm at 20 dB gain. A 54-qubit Sycamore processor was used to benchmark these devices. Design has no adverse effect on system noise, readout fidelity, or qubit dephasing.
  arXiv  Detail & Related papers  (2022-09-16T07:34:05Z)
• First design of a superconducting qubit for the QUB-IT experiment [50.591267188664666]
  The goal of the QUB-IT project is to realize an itinerant single-photon counter exploiting Quantum Non Demolition (QND) measurements and entangled qubits. We present the design and simulation of the first superconducting device consisting of a transmon qubit coupled to a resonator using Qiskit-Metal.
  arXiv  Detail & Related papers  (2022-07-18T07:05:10Z)
• Efficient and Low-Backaction Quantum Measurement Using a Chip-Scale Detector [6.986401053690062]
  Superconducting qubits are a leading platform for scalable quantum computing and quantum error correction. This work constitutes a high-quality platform for the scalable measurement of superconducting qubits.
  arXiv  Detail & Related papers  (2020-08-09T20:05:29Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.