Assessment of Submillimeter Precision via Structure from Motion Technique in Close-Range Capture Environments

• URL: http://arxiv.org/abs/2409.15602v1
• Date: Mon, 23 Sep 2024 23:13:06 GMT
• Title: Assessment of Submillimeter Precision via Structure from Motion Technique in Close-Range Capture Environments
• Authors: Francisco Roza de Moraes, Irineu da Silva,
• Abstract summary: This study investigates the potential of the SfM method to create submillimeter-quality models for structural tests, with short-distance captures. Employing a calibration model with images taken over a test board and a set of Scale Bars (SB) appropriately distributed over the test area, an overlap rate of 80 percent, and the integration of vertical and oblique images, RMSE values of approximately 0.1 mm were obtained.
• Score: 0.0
• License: http://creativecommons.org/licenses/by-nc-sa/4.0/
• Abstract: Creating 3D models through the Structure from Motion technique is a recognized, efficient, cost-effective structural monitoring strategy. This technique is applied in several engineering fields, particularly for creating models of large structures from photographs taken a few tens of meters away. However, discussions about its usability and the procedures for conducting laboratory analysis, such as structural tests, are rarely addressed. This study investigates the potential of the SfM method to create submillimeter-quality models for structural tests, with short-distance captures. A series of experiments was carried out, with photographic captures at a 1-meter distance, using different quality settings: camera calibration model, Scale Bars dispersion, overlapping rates, and the use of vertical and oblique images. Employing a calibration model with images taken over a test board and a set of Scale Bars (SB) appropriately distributed over the test area, an overlap rate of 80 percent, and the integration of vertical and oblique images, RMSE values of approximately 0.1 mm were obtained. This result indicates the potential application of the technique for 3D modeling with submillimeter positional quality, as required for structural tests in laboratory environments.

Related papers

• Very High-Resolution Bridge Deformation Monitoring Using UAV-based Photogrammetry [0.0]
  In this contribution, we address the question of the suitability of UAV-based monitoring for structural health monitoring (SHM) A research reinforced concrete bridge can be exposed to a predefined load via ground anchors. Very high-resolution image blocks have been captured before, during, and after the application of controlled loads. Dense image point clouds were computed to evaluate the performance of surface-based data acquisition. We show that by employing the introduced UAV-based monitoring approach, a full area-wide quantification of deformation is possible in contrast to classical point or profile measurements.
  arXiv  Detail & Related papers  (2024-10-09T08:17:03Z)
• Deep Learning based Optical Image Super-Resolution via Generative Diffusion Models for Layerwise in-situ LPBF Monitoring [4.667646675144656]
  We implement generative deep learning models to link low-cost, low-resolution images of the build plate to detailed high-resolution optical images of the build plate. A conditional latent probabilistic diffusion model is trained to produce realistic high-resolution images of the build plate from low-resolution webcam images. We also design a framework to recreate the 3D morphology of the printed part and analyze the surface roughness of the reconstructed samples.
  arXiv  Detail & Related papers  (2024-09-20T02:59:25Z)
• GPU-Accelerated RSF Level Set Evolution for Large-Scale Microvascular Segmentation [2.5003043942194236]
  We propose a reformulation and implementation of the region-scalable fitting (RSF) level set model. This makes it amenable to three-dimensional evaluation using both single-instruction multiple data (SIMD) and single-program multiple-data (SPMD) parallel processing. We tested this 3D parallel RSF approach on multiple data sets acquired using state-of-the-art imaging techniques to acquire microvascular data.
  arXiv  Detail & Related papers  (2024-04-03T15:37:02Z)
• Macroscale fracture surface segmentation via semi-supervised learning considering the structural similarity [1.3654846342364308]
  Three datasets were created to analyze the influence of structural similarity on the segmentation capability. We implemented a weak-to-strong consistency regularization for semi-supervised learning. Our approach reduced the number of labeled images required for training by a factor of 6.
  arXiv  Detail & Related papers  (2024-03-27T08:21:41Z)
• Neural Lens Modeling [50.57409162437732]
  NeuroLens is a neural lens model for distortion and vignetting that can be used for point projection and ray casting. It can be used to perform pre-capture calibration using classical calibration targets, and can later be used to perform calibration or refinement during 3D reconstruction. The model generalizes across many lens types and is trivial to integrate into existing 3D reconstruction and rendering systems.
  arXiv  Detail & Related papers  (2023-04-10T20:09:17Z)
• Enhancement of Novel View Synthesis Using Omnidirectional Image Completion [61.78187618370681]
  We present a method for synthesizing novel views from a single 360-degree RGB-D image based on the neural radiance field (NeRF) Experiments demonstrated that the proposed method can synthesize plausible novel views while preserving the features of the scene for both artificial and real-world data.
  arXiv  Detail & Related papers  (2022-03-18T13:49:25Z)
• Wide-angle Image Rectification: A Survey [86.36118799330802]
  wide-angle images contain distortions that violate the assumptions underlying pinhole camera models. Image rectification, which aims to correct these distortions, can solve these problems. We present a detailed description and discussion of the camera models used in different approaches. Next, we review both traditional geometry-based image rectification methods and deep learning-based methods.
  arXiv  Detail & Related papers  (2020-10-30T17:28:40Z)
• Kinematic-Structure-Preserved Representation for Unsupervised 3D Human Pose Estimation [58.72192168935338]
  Generalizability of human pose estimation models developed using supervision on large-scale in-studio datasets remains questionable. We propose a novel kinematic-structure-preserved unsupervised 3D pose estimation framework, which is not restrained by any paired or unpaired weak supervisions. Our proposed model employs three consecutive differentiable transformations named as forward-kinematics, camera-projection and spatial-map transformation.
  arXiv  Detail & Related papers  (2020-06-24T23:56:33Z)
• Vid2Curve: Simultaneous Camera Motion Estimation and Thin Structure Reconstruction from an RGB Video [90.93141123721713]
  Thin structures, such as wire-frame sculptures, fences, cables, power lines, and tree branches, are common in the real world. It is extremely challenging to acquire their 3D digital models using traditional image-based or depth-based reconstruction methods because thin structures often lack distinct point features and have severe self-occlusion. We propose the first approach that simultaneously estimates camera motion and reconstructs the geometry of complex 3D thin structures in high quality from a color video captured by a handheld camera.
  arXiv  Detail & Related papers  (2020-05-07T10:39:20Z)
• Multi-View Photometric Stereo: A Robust Solution and Benchmark Dataset for Spatially Varying Isotropic Materials [65.95928593628128]
  We present a method to capture both 3D shape and spatially varying reflectance with a multi-view photometric stereo technique. Our algorithm is suitable for perspective cameras and nearby point light sources.
  arXiv  Detail & Related papers  (2020-01-18T12:26:22Z)
• A Two-step Calibration Method for Unfocused Light Field Camera Based on Projection Model Analysis [8.959346460518226]
  The proposed method is able to reuse traditional camera calibration methods for the direction parameter set. The accuracy and robustness of the proposed method outperforms its counterparts under various benchmark criteria.
  arXiv  Detail & Related papers  (2020-01-11T10:37:56Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.