Compact Optical Single-axis Joint Torque Sensor Using Redundant Photo-Reflectors and Quadratic-Programming Calibration

• URL: http://arxiv.org/abs/2603.16040v1
• Date: Tue, 17 Mar 2026 00:56:51 GMT
• Title: Compact Optical Single-axis Joint Torque Sensor Using Redundant Photo-Reflectors and Quadratic-Programming Calibration
• Abstract summary: Current-sensor-based torque estimation in many collaborative robots suffers from poor low-torque accuracy due to gearbox stiction/friction and current-torque nonlinearity.<n>This study proposes a non-contact photo-reflector-based joint torque sensor for precise joint-level torque control and safe physical interaction.
• Score: 3.8411993084160283
• License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
• Abstract: This study proposes a non-contact photo-reflector-based joint torque sensor for precise joint-level torque control and safe physical interaction. Current-sensor-based torque estimation in many collaborative robots suffers from poor low-torque accuracy due to gearbox stiction/friction and current-torque nonlinearity, especially near static conditions. The proposed sensor optically measures micro-deformation of an elastic structure and employs a redundant array of photo-reflectors arranged in four directions to improve sensitivity and signal-to-noise ratio. We further present a quadratic-programming-based calibration method that exploits redundancy to suppress noise and enhance resolution compared to least-squares calibration. The sensor is implemented in a compact form factor (96 mm diameter, 12 mm thickness). Experiments demonstrate a maximum error of 0.083%FS and an RMS error of 0.0266 Nm for z-axis torque measurement. Calibration tests show that the proposed calibration achieves a 3 sigma resolution of 0.0224 Nm at 1 kHz without filtering, corresponding to a 2.14 times improvement over the least-squares baseline. Temperature chamber characterization and rational fitting based compensation mitigate zero drift induced by MCU self heating and motor heat. Motor-level validation via torque control and admittance control confirms improved low torque tracking and disturbance robustness relative to current-sensor-based control.

Related papers

• Magnetically Self-Sealed MR Haptic Actuator With PWM-Based Excitation and High-Fidelity Torque Control [10.326757545448457]
  Magnetorheological fluid (MRF)-based actuators offer a compact and rapidly controllable solution for haptic feedback.<n>Practical implementation requires reliable fluid sealing, low-hysteresis, accurate torque control, and stable long-duration operation.<n>This article presents an integrated MRF haptic system featuring a compact magnetically self-sealed rotary actuator.
  arXiv  Detail & Related papers  (2026-08-20T05:04:25Z)
• Beyond Control Points: Arcsecond Relative-Motion Estimation of Vision Measurement Platforms With Incomplete or Absent Control Fields [43.43572961146893]
  We develop a control-adaptive differential framework that estimates platform motion directly from image displacements and known 3D points.<n>We derive the rotation observability condition, a leakage bound for unmodeled translation and nonrigid point motion, and the single-point axial-prior bias law.
  arXiv  Detail & Related papers  (2026-08-14T03:41:30Z)
• Differential 6-DOF Pose Estimation with Provable First-Order Immunity to Camera Calibration Errors [39.41872679860813]
  Conventional 3D-2D methods estimate absolute camera poses independently each time and recover platform motion through camera-to-platform poses.<n>We present a differential pose estimation method that directly recovers platform motion from inter-frame image displacements and known 3D control points.<n>We prove that extrinsic errors cancel exactly, while rotational errors induce a bounded perturbation determined by calibration error, motion, magnitude and observation geometry.
  arXiv  Detail & Related papers  (2026-08-05T10:36:04Z)
• Benchmarking Dark Matter Search using a Parity-Check Protocol with Machine-Learning Optimized Pulses [0.0]
  We employ a superconducting transmon qubit dispersively coupled to a double-cavity system.<n>We operate this detector in a regime of increased qubit-cavity coupling, resulting in Stark shifts of 4.6 MHz.<n>We experimentally validate this protocol and demonstrate single-photon detection performance comparable to previous implementations.
  arXiv  Detail & Related papers  (2026-06-24T13:13:44Z)
• Friction Characterization of a Cable-Driven Differential Actuation System for Lower-Limb Exoskeletons [42.628421392139]
  Lower-limb exoskeletons require actuation systems that can provide accurate joint torque control.<n> Conventional architectures often rely on independently actuated joints and joint-level torque sensors.<n>This paper presents a novel differential actuation architecture for hip-knee flexion/extension.
  arXiv  Detail & Related papers  (2026-06-14T19:47:32Z)
• Equivariant Filter for Radar-Inertial Odometry [45.85581416235741]
  Radar-Inertial Odometry (RIO) based on the Extended Kalman Filter (EKF) relies on accurate extrinsic calibration between the radar and the Inertial Measurement Unit (IMU)<n>This letter proposes an Equivariant Filter (EqF) for RIO based on a Lie group symmetry that geometrically couples navigation states and IMU biases.
  arXiv  Detail & Related papers  (2026-04-24T21:47:06Z)
• NLiPsCalib: An Efficient Calibration Framework for High-Fidelity 3D Reconstruction of Curved Visuotactile Sensors [6.94308778422421]
  We present NLiPsCalib, a physics-consistent and efficient calibration framework for curved visuotactile sensors.<n>We further introduce NLiPsTac, a controllable-light-source tactile sensor developed to validate our framework.
  arXiv  Detail & Related papers  (2026-03-10T07:50:49Z)
• Security Analysis of MDI-QKD in Turbulent Free-Space Polarization Channels-A Composite Channel Framework [41.14912220553869]
  turbulence induces polarization decoherence and depolarization, which degrade the secret key rate.<n>We propose a unified depolarizing-dephasing channel model for turbulence-induced polarization decoherence in FSO MDI-QKD.<n>The model excels in clear, overcast, and hazy weather conditions, offering computational efficiency and experimental verifiability for real-time link adaptation.
  arXiv  Detail & Related papers  (2025-09-02T08:34:59Z)
• A re-calibration method for object detection with multi-modal alignment bias in autonomous driving [6.672552664633057]
  Multi-modal object detection in autonomous driving has achieved great breakthroughs due to the usage of fusing complementary information from different sensors.<n>The calibration in fusion between sensors such as LiDAR and camera was always supposed to be precise in previous work.<n>In reality, calibration matrices are fixed when the vehicles leave the factory, but mechanical vibration, road bumps, and data lags may cause calibration bias.
  arXiv  Detail & Related papers  (2024-05-27T05:46:37Z)
• In-situ-tunable spin-spin interactions in a Penning trap with in-bore optomechanics [41.94295877935867]
  We present an optomechanical system for in-situ tuning of the coherent spin-motion and spin-spin interaction strength. We characterize the system using measurements of the induced mean-field spin precession. These experiments show approximately a $times2$ variation in the ratio of the coherent to incoherent interaction strength.
  arXiv  Detail & Related papers  (2024-01-31T11:00:39Z)
• E-Calib: A Fast, Robust and Accurate Calibration Toolbox for Event Cameras [18.54225086007182]
  We present E-Calib, a novel, fast, robust, and accurate calibration toolbox for event cameras. The proposed method is tested in a variety of rigorous experiments for different event camera models.
  arXiv  Detail & Related papers  (2023-06-15T12:16:38Z)
• Macroscopic noise amplification by asymmetric dyads in non-Hermitian optical systems for generative diffusion models [55.2480439325792]
  asymmetric non-Hermitian dyads are promising candidates for efficient sensors and ultra-fast random number generators. integrated light emission from such asymmetric dyads can be efficiently used for all-optical degenerative diffusion models of machine learning.
  arXiv  Detail & Related papers  (2022-06-24T10:19:36Z)
• Investigation and comparison of measurement schemes in the low frequency biosensing regime using solid-state defect centers [58.720142291102135]
  Solid state defects in diamond make promising quantum sensors with high sensitivity andtemporal resolution. Inhomogeneous broadening and drive amplitude variations have differing impacts on the sensitivity depending on the sensing scheme used. We numerically investigate and compare the predicted sensitivity of schemes based on continuous-wave (CW) optically detected magnetic resonance (ODMR) spectroscopy, pi-pulse ODMR and Ramsey interferometry.
  arXiv  Detail & Related papers  (2021-09-27T13:05:23Z)
• Accurate Alignment Inspection System for Low-resolution Automotive and Mobility LiDAR [125.41260574344933]
  An accurate inspection system is proposed for estimating a LiDAR alignment error after sensor attachment on a mobility system such as a vehicle or robot. The proposed method uses only a single target board at the fixed position to estimate the three orientations (roll, tilt, and yaw) and the horizontal position of the LiDAR attachment with sub-degree and millimeter level accuracy.
  arXiv  Detail & Related papers  (2020-08-24T17:47:59Z)
• Rotation sensing with improved stability using point source atom interferometry [0.0]
  Point source atom interferometry is a promising approach for implementing robust, high-sensitivity, rotation sensors using cold atoms. We present two methods to stabilize the scale factor, one relying on a model-based correction which exploits correlations between multiple features of the interferometer output. We demonstrate both schemes experimentally with complete suppression of scale factor drifts, maintaining the original rotation sensitivity and allowing for bias-free operation over several hours.
  arXiv  Detail & Related papers  (2020-02-19T19:00:01Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.