Off-Axis Compliant RCM Joint with Near-Isotropic Stiffness and Minimal Parasitic Error

• URL: http://arxiv.org/abs/2603.28240v1
• Date: Mon, 30 Mar 2026 09:59:18 GMT
• Title: Off-Axis Compliant RCM Joint with Near-Isotropic Stiffness and Minimal Parasitic Error
• Abstract summary: This paper presents an off-axis, monolithic compliant Remote Center of Motion (RCM) joint for neuroendoscopic manipulation.<n>The end-effector is placed outside the tetrahedral flexure to improve line of sight, facilitate sterilization, and allow rapid tool release.
• Score: 5.683284334858979
• License: http://creativecommons.org/licenses/by/4.0/
• Abstract: This paper presents an off-axis, monolithic compliant Remote Center of Motion (RCM) joint for neuroendoscopic manipulation, combining near-isotropic stiffness with minimal parasitic motion. Based on the Tetra II concept, the end-effector is placed outside the tetrahedral flexure to improve line of sight, facilitate sterilization, and allow rapid tool release. Design proceeds in two stages: mobility panels are sized with a compliance-based isotropy objective, then constraining panels are synthesized through finite-element feasibility exploration to trade stiffness isotropy against RCM drift. The joint is modeled with beam elements and validated via detailed finite-element analyses, including fatigue-bounded stress constraints. A PA12 prototype is fabricated by selective laser sintering and characterized on a benchtop: a 2 N radial load is applied at the end-effector while a 6-DOF electromagnetic sensor records pose. The selected configuration produces a stiffness-ellipse principal axis ratio (PAR) of 1.37 and a parasitic-to-useful rotation ratio (PRR) of 0.63%. Under a 4.5° commanded rotation, the predicted RCM drift remains sub-millimetric (0.015-0.172 mm). Fatigue analysis predicts a usable rotational workspace of 12.1°-34.4° depending on direction. Experiments reproduce the simulated directional stiffness trend with typical deviations of 6-30%, demonstrating a compact, fabrication-ready RCM module for constrained surgical access.

Related papers

• Contact-Constrained Lower-Limb Joint-Offset Calibration for Humanoid Robots [4.637705968841629]
  We present a self-contained calibration framework exploiting only onboard joint encoders and a pelvis-mounted IMU.<n>A Hessian eigenstructure analysis shows that parallel pitch axes induce a rotational coupling.<n>A standing-posture knee prior anchors the remaining weak pitch-chain decomposition.
  arXiv  Detail & Related papers  (2026-09-02T08:51:37Z)
• Beyond Control Points: Arcsecond Relative-Motion Estimation of Vision Measurement Platforms With Incomplete or Absent Control Fields [43.43572961146893]
  We develop a control-adaptive differential framework that estimates platform motion directly from image displacements and known 3D points.<n>We derive the rotation observability condition, a leakage bound for unmodeled translation and nonrigid point motion, and the single-point axial-prior bias law.
  arXiv  Detail & Related papers  (2026-08-14T03:41:30Z)
• Differential 6-DOF Pose Estimation with Provable First-Order Immunity to Camera Calibration Errors [39.41872679860813]
  Conventional 3D-2D methods estimate absolute camera poses independently each time and recover platform motion through camera-to-platform poses.<n>We present a differential pose estimation method that directly recovers platform motion from inter-frame image displacements and known 3D control points.<n>We prove that extrinsic errors cancel exactly, while rotational errors induce a bounded perturbation determined by calibration error, motion, magnitude and observation geometry.
  arXiv  Detail & Related papers  (2026-08-05T10:36:04Z)
• Tripody: An Overconstrained 3-SPR-like Parallel Robot for High-Reach Construction Tasks [5.351986678360277]
  Tripody is a wheeled 3-DoF parallel robot for high-reach tasks.<n>It replaces the base spherical joints of a classical 3-SPR.<n>System extends from 1.7m to 3.4m in height, supports a continuous 32kg payload.
  arXiv  Detail & Related papers  (2026-07-28T14:36:16Z)
• A Model-Based Decoupling Strategy for Proprioception and Contact Sensing in an Architected Soft Manipulator [49.225033144914214]
  We present a model-based strategy that decouples proprioceptive and contact signals from fluidic pressure sensors embedded in a soft architected segment.<n>On a single ITH segment, this approach achieves proprioceptive shape estimation with a relative bending error of 0.11 +/- 0.02 and a contact detection rate of 97% across 178 trials.
  arXiv  Detail & Related papers  (2026-07-17T03:03:19Z)
• Friction Characterization of a Cable-Driven Differential Actuation System for Lower-Limb Exoskeletons [42.628421392139]
  Lower-limb exoskeletons require actuation systems that can provide accurate joint torque control.<n> Conventional architectures often rely on independently actuated joints and joint-level torque sensors.<n>This paper presents a novel differential actuation architecture for hip-knee flexion/extension.
  arXiv  Detail & Related papers  (2026-06-14T19:47:32Z)
• Design of an In-Pipe Robot with Contact-Angle-Guided Kinematic Decoupling for Crosstalk-Suppressed Locomotion [20.379309593600414]
  In-pipe inspection robots must traverse confined pipeline networks with elbows and three-dimensional fittings.<n>In compact V-shaped platforms, these functions often rely on shared contacts or indirect actuation.<n>This paper presents a V-shaped in-pipe robot with a joint-axis-and-wheel-separation layout that provides two physically independent actuation channels.
  arXiv  Detail & Related papers  (2026-03-28T11:40:36Z)
• Tendon-Driven Reciprocating and Non-Reciprocating Motion via Snapping Metabeams [0.0]
  A tendon-driven mechanism consisting of spiral-based metabeams was developed for producing both reciprocating and non-reciprocating motion.<n>The spiral geometry allows large reversible deformation even when made from a relatively stiff material such as PLA.<n>The developed mechanism was further integrated into a swimming robot, where tendon-driven fins exhibited two distinct actuation modes.
  arXiv  Detail & Related papers  (2026-02-20T16:35:51Z)
• Dynamic Modeling and MPC for Locomotion of Tendon-Driven Soft Quadruped [0.0]
  SLOT (Soft Legged Omnidirectional Tetrapod) is a tendon-driven soft quadruped robot with 3D-printed TPU legs.<n>Each leg is modeled as a deformable continuum using discrete Cosserat rod theory.<n>A modular whole-body modeling framework is introduced, in which compliant leg dynamics are represented.
  arXiv  Detail & Related papers  (2026-02-18T11:14:22Z)
• Pitch Angle Control of a Magnetically Actuated Capsule Robot with Nonlinear FEA-based MPC and EKF Multisensory Fusion [0.3694429692322632]
  This paper presents a model-based framework for magnetic pitch control of an ingestible capsule robot actuated by a four-coil electromagnetic array.<n>Experiments on a compliant stomach-inspired surface demonstrate robust pitch reorientation from both horizontal and upright configurations.<n>These results establish finite-element-informed MPC with sensor fusion as a scalable strategy for pitch regulation, controlled docking, and future multi-degree-of-freedom capsule locomotion.
  arXiv  Detail & Related papers  (2026-02-11T07:59:52Z)
• Helical Tendon-Driven Continuum Robot with Programmable Follow-the-Leader Operation [0.11242503819703255]
  The ExoNav is a steerable robotic tool designed to facilitate precise navigation to the ventral and lateral epidural space.<n>Based on the helical shape of the ExoNav upon actuation, it is capable of performing follow-the-leader (FTL) motion.<n>The proposed simulation has the capability to calculate optimum tendon tensions to follow the desired FTL paths.
  arXiv  Detail & Related papers  (2026-01-19T16:03:56Z)
• PHASE-Net: Physics-Grounded Harmonic Attention System for Efficient Remote Photoplethysmography Measurement [63.007237197267834]
  Existing deep learning methods are mostly physiological monitoring and lack theoretical robustness.<n>We propose a physics-informed r paradigm derived from the Navier-Stokes equations of hemodynamics, showing that the pulse signal follows a second-order system.<n>This provides a theoretical justification for using a Temporal Conal Network (TCN)<n>Phase-Net achieves state-of-the-art performance with strong efficiency, offering a theoretically grounded and deployment-ready r solution.
  arXiv  Detail & Related papers  (2025-09-29T14:36:45Z)
• Streamline controlled rectification of supercurrent in thin-film asymmetric weak links [39.58317527488534]
  We study the supercurrent diode effect (SDE) in mesoscopic superconducting weak links formed by asymmetric Dayem bridges.<n>By implementing controlled geometric defects at the junction between the constriction and superconducting leads, we induce current crowding and disrupt spatial symmetry.<n>Our findings advocate for mesoscopic Dayem bridges as a flexible platform for designing and controlling superconducting diode functionalities.
  arXiv  Detail & Related papers  (2025-07-16T14:26:18Z)
• In-situ-tunable spin-spin interactions in a Penning trap with in-bore optomechanics [41.94295877935867]
  We present an optomechanical system for in-situ tuning of the coherent spin-motion and spin-spin interaction strength. We characterize the system using measurements of the induced mean-field spin precession. These experiments show approximately a $times2$ variation in the ratio of the coherent to incoherent interaction strength.
  arXiv  Detail & Related papers  (2024-01-31T11:00:39Z)
• Designer Magnetism in High Entropy Oxides [41.74498230885008]
  Disorder can have a dominating influence on correlated and quantum materials. In magnetic systems, spin and exchange disorder can provide access to quantum criticality, frustration, and spin dynamics. We show that high entropy oxides present an unexplored route to designing quantum materials.
  arXiv  Detail & Related papers  (2021-04-12T15:21:48Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.