Integrated Identification of Collaborative Robots for Robot Assisted 3D Printing Processes

• URL: http://arxiv.org/abs/2604.01991v1
• Date: Thu, 02 Apr 2026 12:54:43 GMT
• Title: Integrated Identification of Collaborative Robots for Robot Assisted 3D Printing Processes
• Abstract summary: This work proposes a model-based approach equipped with an integrated identification procedure of the system's parameters.<n>We show that the integrated modeling procedure allows to obtain a reliable dynamic model even in the presence of sensory and programming limitations.
• Score: 37.19059223604783
• License: http://creativecommons.org/licenses/by/4.0/
• Abstract: In recent years, the integration of additive manufacturing (AM) and industrial robotics has opened new perspectives for the production of complex components, particularly in the automotive sector. Robot-assisted additive manufacturing processes overcome the dimensional and kinematic limitations of traditional Cartesian systems, enabling non-planar deposition and greater geometric flexibility. However, the increasing dynamic complexity of robotic manipulators introduces challenges related to precision, control, and error prediction. This work proposes a model-based approach equipped with an integrated identification procedure of the system's parameters, including the robot, the actuators and the controllers. We show that the integrated modeling procedure allows to obtain a reliable dynamic model even in the presence of sensory and programming limitations typical of collaborative robots. The manipulator's dynamic model is identified through an integrated five step methodology: starting with geometric and inertial analysis, followed by friction and controller parameters identification, all the way to the remaining parameters identification. The proposed procedure intrinsically ensures the physical consistency of the identified parameters. The identification approach is validated on a real world case study involving a 6-Degrees-Of-Freedom (DoFs) collaborative robot used in a thermoplastic extrusion process. The very good matching between the experimental results given by actual robot and those given by the identified model shows the potential enhancement of precision, control, and error prediction in Robot Assisted 3D Printing Processes.

Related papers

• CoLI: A Reproducible Platform for Continuum Robot Learning via Monolithic 3D Printing and Isomorphic Teleoperation [1.4763505073094778]
  We present an open-source continuum robot design with a simplified fabrication pipeline enabled by 3D printing.<n>Control is achieved through an isomorphic teleoperation interface that establishes a direct actuator-level mapping.<n>The proposed system is evaluated through hardware characterization and a set of manipulation tasks.
  arXiv  Detail & Related papers  (2026-06-18T15:45:10Z)
• Compliant Non-Prehensile Pushing Manipulation [2.526906424066039]
  We address the challenge of performing non-prehensile pushing operations with a compliant robotic manipulation system.<n>We extend a state-of-the-art pushing model to integrate it with impedance-controlled robots.<n>We develop a model predictive control framework built upon this model that enables compliant pushing through optimal modulation of the robot's position/velocity set-point.
  arXiv  Detail & Related papers  (2026-05-25T10:24:05Z)
• A Dynamic Toolkit for Transmission Characteristics of Precision Reducers with Explicit Contact Geometry [5.7347536097223335]
  Precision reducers are critical components in robotic systems, directly affecting the motion accuracy and dynamic performance of humanoid robots, quadruped robots, collaborative robots, industrial robots, and SCARA robots.<n>This paper presents a dynamic toolkit for analyzing the transmission characteristics of precision reducers with explicit contact geometry.<n>A unified framework is proposed to address the challenges in modeling accurate contact behaviors, evaluating gear stiffness, and predicting system vibrations.
  arXiv  Detail & Related papers  (2026-04-02T03:29:01Z)
• A Methodology for Dynamic Parameters Identification of 3-DOF Parallel Robots in Terms of Relevant Parameters [0.19999259391104393]
  The identification of dynamic parameters in mechanical systems is important for improving model-based control and for performing realistic simulations.<n>A strategy for dynamic parameter identification of fully parallel robots in terms of a subset called relevant parameters is put forward.<n>The application of the propose strategy has been experimentally tested on two difierent configurations of actual 3-DOF parallel robots.
  arXiv  Detail & Related papers  (2026-03-16T13:23:34Z)
• Shape Control of a Planar Hyper-Redundant Robot via Hybrid Kinematics-Informed and Learning-based Approach [42.55947704321053]
  Hyper-redundant robots offer high dexterity, making them good at operating in confined and unstructured environments.<n>To extend the reachable workspace, we built a multi-segment flexible rack actuated planar robot.<n>We propose a hybrid kinematics-informed and learning-based shape control method, named SpatioCoupledNet.
  arXiv  Detail & Related papers  (2026-03-11T04:35:06Z)
• Robotic Grasping and Placement Controlled by EEG-Based Hybrid Visual and Motor Imagery [64.82869118243723]
  We present a framework that integrates EEG-based visual and motor imagery (VI/MI) with robotic control to enable real-time, intention-driven grasping and placement.<n>Motivated by the promise of BCI-driven robotics, this system bridges neural signals with physical control by deploying offline-pretrained decoders in a zero-shot manner.
  arXiv  Detail & Related papers  (2026-03-03T17:41:42Z)
• A Robotic Testing Platform for Pipelined Discovery of Resilient Soft Actuators [63.07587517846448]
  We propose an optimization pipeline enabled by a novel testing robot capable of scanning DEA lifetime.<n>The robot integrates electro-mechanical property measurement, programmable voltage input, and multi-channel testing capacity.<n>Using it, we scanned the lifetime of Elastosil-based linear actuators across parameters including input voltage magnitude, frequency, electrode material concentration, and electrical connection filler.
  arXiv  Detail & Related papers  (2026-02-24T14:41:28Z)
• Physical Human-Robot Interaction for Grasping in Augmented Reality via Rigid-Soft Robot Synergy [43.680646123465316]
  Hybrid rigid-soft robots combine the precision of rigid manipulators with the compliance and adaptability of soft arms.<n>We present a novel augmented reality (AR)-based physical human-robot interaction framework that enables direct teleoperation of a hybrid rigid-soft robot.
  arXiv  Detail & Related papers  (2026-02-19T06:56:47Z)
• RoboScript: Code Generation for Free-Form Manipulation Tasks across Real and Simulation [77.41969287400977]
  This paper presents textbfRobotScript, a platform for a deployable robot manipulation pipeline powered by code generation. We also present a benchmark for a code generation benchmark for robot manipulation tasks in free-form natural language. We demonstrate the adaptability of our code generation framework across multiple robot embodiments, including the Franka and UR5 robot arms.
  arXiv  Detail & Related papers  (2024-02-22T15:12:00Z)
• Automated Process Planning Based on a Semantic Capability Model and SMT [50.76251195257306]
  In research of manufacturing systems and autonomous robots, the term capability is used for a machine-interpretable specification of a system function. We present an approach that combines these two topics: starting from a semantic capability model, an AI planning problem is automatically generated.
  arXiv  Detail & Related papers  (2023-12-14T10:37:34Z)
• Formal Modelling for Multi-Robot Systems Under Uncertainty [11.21074891465253]
  We review modelling formalisms for multi-robot systems under uncertainty. We discuss how they can be used for planning, reinforcement learning, model checking, and simulation.
  arXiv  Detail & Related papers  (2023-05-26T15:23:35Z)
• Integrated Benchmarking and Design for Reproducible and Accessible Evaluation of Robotic Agents [61.36681529571202]
  We describe a new concept for reproducible robotics research that integrates development and benchmarking. One of the central components of this setup is the Duckietown Autolab, a standardized setup that is itself relatively low-cost and reproducible. We validate the system by analyzing the repeatability of experiments conducted using the infrastructure and show that there is low variance across different robot hardware and across different remote labs.
  arXiv  Detail & Related papers  (2020-09-09T15:31:29Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.