A Co-Design Framework for High-Performance Jumping of a Five-Bar Monoped with Actuator Optimization

• URL: http://arxiv.org/abs/2604.06025v1
• Date: Tue, 07 Apr 2026 16:21:53 GMT
• Title: A Co-Design Framework for High-Performance Jumping of a Five-Bar Monoped with Actuator Optimization
• Abstract summary: We present a co-design framework for a planar closed-chain five-bar monoped that jointly optimize mechanical design, motor and gearbox parameters, and control parameters for dynamic jumping.<n>Results show an improvement of approximately 42% in jump distance and a 15.8% reduction in mechanical energy consumption compared to a nominal design.
• Score: 5.086339230221755
• License: http://creativecommons.org/licenses/by-nc-nd/4.0/
• Abstract: The performance of legged robots depends strongly on both mechanical design and control, motivating co-design approaches that jointly optimize these parameters. However, most existing co-design studies focus on optimizing link dimensions and transmission ratios while neglecting detailed actuator design, particularly motor and gearbox parameter optimization, and are largely limited to serial open-chain mechanisms. In this work, we present a co-design framework for a planar closed-chain five-bar monoped that jointly optimizes mechanical design, motor and gearbox parameters, and control parameters for dynamic jumping. The objective is to maximize jump distance while minimizing mechanical energy consumption. The framework uses a two-stage optimization approach, where actuator optimization generates a mapping from gear ratio to actuator mass, efficiency, and peak torque, which is then used in co-design optimization of the robot design and control using CMA-ES. Simulation results show an improvement of approximately 42% in jump distance and a 15.8% reduction in mechanical energy consumption compared to a nominal design, demonstrating the effectiveness of the proposed framework in identifying optimal design, actuator, and control parameters for high-performance and energy-efficient planar jumping.

Related papers

• Dynamic Modeling and Robust Gait Optimization of a Compliant Worm Robot [6.048766517808481]
  This paper presents an experimentally grounded modeling and optimization framework for a compliant worm robot capable of traversing corrugated pipes.<n>A multi-objective gait optimization problem is formulated to maximize average speed while minimizing average power.<n>Results show that the proposed framework captures the dominant locomotion and energy-consumption behavior of the robot.
  arXiv  Detail & Related papers  (2026-04-13T20:20:03Z)
• Efficient and Versatile Quadrupedal Skating: Optimal Co-design via Reinforcement Learning and Bayesian Optimization [8.969390069418777]
  We present a hardware-control co-design approach that enables efficient and versatile roller skating on quadrupedal robots equipped with passive wheels.<n> Passive-wheel skating reduces leg inertia and improves energy efficiency, particularly at high speeds.
  arXiv  Detail & Related papers  (2026-03-19T02:12:50Z)
• Energy-Efficient Omnidirectional Locomotion for Wheeled Quadrupeds via Predictive Energy-Aware Nominal Gait Selection [17.713242307107166]
  We present a hierarchical control framework that integrates predictive power modeling with residual reinforcement learning to optimize omnidirectional efficiency for wheeled quadrupedal robots.<n>Our approach employs a novel power prediction network that forecasts energy consumption across different gait patterns over a 1-second horizon.<n>A reinforcement learning policy then generates residual adjustments to this nominal gait, fine-tuning the robot's actions to balance energy efficiency with performance objectives.
  arXiv  Detail & Related papers  (2025-12-23T09:56:35Z)
• Bayesian Optimization for Automatic Tuning of Torque-Level Nonlinear Model Predictive Control [2.907225673486874]
  This paper presents an auto-tuning framework for torque-based Model Predictive Control (nMPC)<n>The MPC serves as a real-time controller for optimal joint torque commands.
  arXiv  Detail & Related papers  (2025-12-03T13:19:42Z)
• Efficient Design of Compliant Mechanisms Using Multi-Objective Optimization [50.24983453990065]
  We address the synthesis of a compliant cross-hinge mechanism capable of large angular strokes.<n>We formulate a multi-objective optimization problem based on kinetostatic performance measures.
  arXiv  Detail & Related papers  (2025-04-23T06:29:10Z)
• Structural Optimization of Lightweight Bipedal Robot via SERL [6.761861053481078]
  This paper introduces the SERL (Structure Evolution Reinforcement Learning) algorithm, which combines reinforcement learning for locomotion tasks with evolution algorithms. We successfully designed a bipedal robot named Wow Orin, where the optimal leg length are obtained through optimization based on body structure and motor torque.
  arXiv  Detail & Related papers  (2024-08-28T08:34:05Z)
• Data-Model-Circuit Tri-Design for Ultra-Light Video Intelligence on Edge Devices [90.30316433184414]
  We propose a data-model-hardware tri-design framework for high- throughput, low-cost, and high-accuracy MOT on HD video stream. Compared to the state-of-the-art MOT baseline, our tri-design approach can achieve 12.5x latency reduction, 20.9x effective frame rate improvement, 5.83x lower power, and 9.78x better energy efficiency, without much accuracy drop.
  arXiv  Detail & Related papers  (2022-10-16T16:21:40Z)
• Faster Attention Is What You Need: A Fast Self-Attention Neural Network Backbone Architecture for the Edge via Double-Condensing Attention Condensers [71.40595908386477]
  We introduce a new faster attention condenser design called double-condensing attention condensers. The resulting backbone (which we name AttendNeXt) achieves significantly higher inference throughput on an embedded ARM processor. These promising results demonstrate that exploring different efficient architecture designs and self-attention mechanisms can lead to interesting new building blocks for TinyML applications.
  arXiv  Detail & Related papers  (2022-08-15T02:47:33Z)
• Deep Learning-Based Inverse Design for Engineering Systems: Multidisciplinary Design Optimization of Automotive Brakes [2.362412515574206]
  Apparent piston travel (APT) and drag torque are the most representative factors for evaluating braking performance. Recent studies on inverse design that use deep learning (DL) have established the possibility of instantly generating an optimal design. MID achieved a similar performance to the single-disciplinary inverse design in terms of accuracy and computational cost.
  arXiv  Detail & Related papers  (2022-02-27T08:29:50Z)
• Maximal power for heat engines: role of asymmetric interaction times [110.83289076967895]
  We introduce the idea of adjusting the interaction time asymmetry in order to optimize the engine performance. Distinct optimization protocols are analyzed in the framework of thermodynamics.
  arXiv  Detail & Related papers  (2020-12-16T22:26:14Z)
• Adaptive pruning-based optimization of parameterized quantum circuits [62.997667081978825]
  Variisy hybrid quantum-classical algorithms are powerful tools to maximize the use of Noisy Intermediate Scale Quantum devices. We propose a strategy for such ansatze used in variational quantum algorithms, which we call "Efficient Circuit Training" (PECT) Instead of optimizing all of the ansatz parameters at once, PECT launches a sequence of variational algorithms.
  arXiv  Detail & Related papers  (2020-10-01T18:14:11Z)
• Bayesian Optimization for Selecting Efficient Machine Learning Models [53.202224677485525]
  We present a unified Bayesian Optimization framework for jointly optimizing models for both prediction effectiveness and training efficiency. Experiments on model selection for recommendation tasks indicate models selected this way significantly improves model training efficiency.
  arXiv  Detail & Related papers  (2020-08-02T02:56:30Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.