Optimal Design and Analytical Modeling of a Soft Fin-Ray Effect Gripper Finger Using the Finite Rigid Elements Method

• URL: http://arxiv.org/abs/2606.03798v1
• Date: Tue, 02 Jun 2026 15:48:26 GMT
• Title: Optimal Design and Analytical Modeling of a Soft Fin-Ray Effect Gripper Finger Using the Finite Rigid Elements Method
• Abstract summary: The objective of this research is to design, fabricate, and model a Fin Ray Effect (FRE) soft gripper finger.<n>This design aims to gently grasp delicate agricultural products, such as tomatoes, that require both adaptability and accurate force application.
• Score: 0.0
• License: http://creativecommons.org/licenses/by/4.0/
• Abstract: Fin Ray-inspired soft grippers offer a promising solution for gently handling delicate, irregular objects, especially in agriculture. The objective of this research is to design, fabricate, and model a Fin Ray Effect (FRE) soft gripper finger to enable precise force control in future applications. This design aims to gently grasp delicate agricultural products, such as tomatoes, that require both adaptability and accurate force application. To address the inherent challenges of soft robotics, including nonlinear behavior, infinite degrees of freedom, and variable material properties, the Finite Rigid Elements Method (FREM) was employed for modeling. This method preserves analytical accuracy while providing a reliable foundation for the development of a force controller in later stages. A detailed Finite Element Model (FEM) was created using ANSYS, and the analytical results were validated through simulation and experimental testing. The gripper's fingers were optimized based on four key criteria: tip displacement, total deflection, stress distribution, and contact force. The optimal finger configuration includes a length of 30 mm, rib spacing of 10 mm, seven ribs angled at -15 deg, and a rib thickness of 1 mm. Theoretical modeling using the FREM predicted finger deformation with a 3% error, while the ANSYS numerical model achieved 2% error.

Related papers

• Generalizing Soft Tissue Deformation and Force Prediction Across Material Stiffness and Geometry [0.2621730497733946]
  Accurate soft tissue simulation is essential for surgical training, pre-operative planning, and haptic feedback systems.<n>Existing approaches neither provide systematic guidance on model selection across stiffness levels, nor generalize across different tissue stiffnesses or geometries.<n>We perform a comprehensive calibration of hyperelastic models in the SOFA Framework using gravity equi-loaded silicone beams with different stiffnesses.<n>Using calibrated simulations as training data, we use a softness conditioned graph neural network, enabling deformation and force prediction across multiple tissue types and unseen geometries.
  arXiv  Detail & Related papers  (2026-08-21T10:39:54Z)
• Soft Robotic Exogloves for Dexterous Mobility -- Towards Personalized Rehabilitation [0.0]
  Soft robotic exogloves can provide hand rehabilitation and assistance.<n> fitting these gloves often relies on standardized measurements not tailored to the individual.<n>We present the design, fabrication, modeling, and testing of a personalized pneumatically-actuated soft robotic exoglove.
  arXiv  Detail & Related papers  (2026-07-08T22:48:29Z)
• PHANTOM Hand [12.871356369910323]
  Tendon-driven underactuated hands excel in adaptive grasping but often suffer from kinematic unpredictability and highly non-actuated force transmission.<n>We introduce the PHANTOM Hand (Hybrid Precision-Augmented Compliance): a modular, human-scale system featuring 6 actuators and 15 degrees of freedom (DoFs)<n>We propose a unified framework that bridges the gap between precise analytic shaping and robust compliant grasping.
  arXiv  Detail & Related papers  (2026-03-24T12:52:18Z)
• SOFTMAP: Sim2Real Soft Robot Forward Modeling via Topological Mesh Alignment and Physics Prior [21.30232105970865]
  SOFTMAP is a sim-real learning framework for real-time 3D forward modeling of tendon-actuated soft finger manipulators.<n>We evaluate SOFTMAP on both simulated and physical hardware, achieving shape prediction accuracy with a Chamfer distance of 0.389 mm in simulation.<n>Our results show that SOFTMAP provides a data-efficient approach for 3D forward modeling and control of soft manipulators.
  arXiv  Detail & Related papers  (2026-03-19T18:21:44Z)
• Tendon-Driven Reciprocating and Non-Reciprocating Motion via Snapping Metabeams [0.0]
  A tendon-driven mechanism consisting of spiral-based metabeams was developed for producing both reciprocating and non-reciprocating motion.<n>The spiral geometry allows large reversible deformation even when made from a relatively stiff material such as PLA.<n>The developed mechanism was further integrated into a swimming robot, where tendon-driven fins exhibited two distinct actuation modes.
  arXiv  Detail & Related papers  (2026-02-20T16:35:51Z)
• FastPhysGS: Accelerating Physics-based Dynamic 3DGS Simulation via Interior Completion and Adaptive Optimization [56.17833729527066]
  We propose FastPhysGS, a framework for physics-based dynamic 3DGS simulation.<n>FastPhysGS achieves high-fidelity physical simulation in 1 minute using only 7 GB runtime memory.
  arXiv  Detail & Related papers  (2026-02-02T07:00:42Z)
• Fractional-order Modeling for Nonlinear Soft Actuators via Particle Swarm Optimization [49.34452620841728]
  This paper proposes an innovative modeling framework based on fractional-order differential equations (FODEs) to capture the dynamic behavior of soft materials.<n>The proposed approach effectively represents the complex deformation phenomena inherent in soft actuators.
  arXiv  Detail & Related papers  (2025-12-20T04:46:25Z)
• Multi-Objective Neural Network Assisted Design Optimization of Soft Fin-Ray Grippers for Enhanced Grasping Performance [2.7309692684728613]
  Internal structure of the Fin-Ray finger plays a significant role in its adaptability and grasping performance.<n>When the Fin-Ray finger becomes more rigid and capable of exerting higher forces, it becomes less delicate in handling objects.<n>In this study, we employ finite element method (FEM) to estimate the deflections and contact forces of the Fin-Ray, grasping cylindrical objects.
  arXiv  Detail & Related papers  (2025-05-31T10:16:58Z)
• Thin-Shell-SfT: Fine-Grained Monocular Non-rigid 3D Surface Tracking with Neural Deformation Fields [66.1612475655465]
  3D reconstruction of deformable surfaces from RGB videos is a challenging problem.<n>Existing methods use deformation models with statistical, neural, or physical priors.<n>We propose ThinShell-SfT, a new method for non-rigid 3D tracking meshes.
  arXiv  Detail & Related papers  (2025-03-25T18:00:46Z)
• MS-MANO: Enabling Hand Pose Tracking with Biomechanical Constraints [50.61346764110482]
  We integrate a musculoskeletal system with a learnable parametric hand model, MANO, to create MS-MANO. This model emulates the dynamics of muscles and tendons to drive the skeletal system, imposing physiologically realistic constraints on the resulting torque trajectories. We also propose a simulation-in-the-loop pose refinement framework, BioPR, that refines the initial estimated pose through a multi-layer perceptron network.
  arXiv  Detail & Related papers  (2024-04-16T02:18:18Z)
• A Multi-Grained Symmetric Differential Equation Model for Learning Protein-Ligand Binding Dynamics [73.35846234413611]
  In drug discovery, molecular dynamics (MD) simulation provides a powerful tool for predicting binding affinities, estimating transport properties, and exploring pocket sites. We propose NeuralMD, the first machine learning (ML) surrogate that can facilitate numerical MD and provide accurate simulations in protein-ligand binding dynamics. We demonstrate the efficiency and effectiveness of NeuralMD, achieving over 1K$times$ speedup compared to standard numerical MD simulations.
  arXiv  Detail & Related papers  (2024-01-26T09:35:17Z)
• Learning to predict metal deformations in hot-rolling processes [59.00006390882099]
  Hot-rolling is a metal forming process that produces a cross-section from an input through a sequence of deformations. In current practice, the rolling sequence and the geometry of their rolls are needed to achieve a given cross-section. We propose a supervised learning approach to predict a given by a set of rolls with given geometry.
  arXiv  Detail & Related papers  (2020-07-22T13:33:44Z)
• Gaining a Sense of Touch. Physical Parameters Estimation using a Soft Gripper and Neural Networks [3.0892724364965005]
  There is not enough research on physical parameters estimation using deep learning algorithms on measurements from direct interaction with objects using robotic grippers. We propose a trainable system for the regression of a stiffness coefficient and provided extensive experiments using the physics simulator environment. Our system can reliably estimate the stiffness of an object using the Yale OpenHand soft gripper based on readings from Inertial Measurement Units (IMUs) attached to its fingers.
  arXiv  Detail & Related papers  (2020-03-02T11:56:14Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.