VSTaI: Design and Characterization of Variable-Stiffness Tactile Interfaces Based on 3D-Printed Structured Fabrics

• URL: http://arxiv.org/abs/2607.29102v1
• Date: Fri, 31 Jul 2026 07:31:59 GMT
• Title: VSTaI: Design and Characterization of Variable-Stiffness Tactile Interfaces Based on 3D-Printed Structured Fabrics
• Abstract summary: This paper presents a compact, variable-stiffness tactile interface (VSTaI) based on vacuum-induced jamming of 3D-printed structured fabrics.<n>One configuration exhibited a stiffness increase of up to 140% under the jammed state.<n>These results support structured-fabric jamming as a practical approach for shape-conformable, tunable-stiffness displays aimed at physical examination training.
• Score: 39.53007356735723
• License: http://creativecommons.org/licenses/by-nc-nd/4.0/
• Abstract: Realistic palpation training requires reliable rendering of soft tissue stiffness changes in real time, which is difficult to achieve with conventional simulators. This paper presents a compact, variable-stiffness tactile interface (VSTaI) based on vacuum-induced jamming of 3D-printed structured fabrics. A vacuum-sealed fabric layer is sandwiched between two silicone layers, and stiffness is tuned by regulating internal pressure. Four fabric patterns with different geometric parameters were fabricated and evaluated using force-indentation tests under atmospheric and vacuum conditions. Across the tested pattern and geometry combinations, vacuum jamming increased stiffness significantly, producing an effective modulus from sub-megapascal to megapascal levels. Specifically, one configuration exhibited a stiffness increase of up to 140% under the jammed state. Circular chainmail patterns provided the most spatially uniform distribution of tactile stiffness, while denser geometries reached higher peak stiffness. VSTaI was also shown to exhibit excellent conformability to the underlying geometry. These results support structured-fabric jamming as a practical approach for shape-conformable, tunable-stiffness displays aimed at physical examination training.

Related papers

• Generalizing Soft Tissue Deformation and Force Prediction Across Material Stiffness and Geometry [0.2621730497733946]
  Accurate soft tissue simulation is essential for surgical training, pre-operative planning, and haptic feedback systems.<n>Existing approaches neither provide systematic guidance on model selection across stiffness levels, nor generalize across different tissue stiffnesses or geometries.<n>We perform a comprehensive calibration of hyperelastic models in the SOFA Framework using gravity equi-loaded silicone beams with different stiffnesses.<n>Using calibrated simulations as training data, we use a softness conditioned graph neural network, enabling deformation and force prediction across multiple tissue types and unseen geometries.
  arXiv  Detail & Related papers  (2026-08-21T10:39:54Z)
• Toward Geometry-Scalable Whole-Body Touch for Humanoids: A 3D-Printed Conformal EIT Skin [66.36050076244905]
  Whole-body tactile sensing is a prerequisite for humanoids that operate in contact-rich human environments.<n>We present a conformal electrical tactile tomography skin fabricated through a geometry-adaptable additive-manufacturing workflow.
  arXiv  Detail & Related papers  (2026-08-03T11:33:30Z)
• A Model-Based Decoupling Strategy for Proprioception and Contact Sensing in an Architected Soft Manipulator [49.225033144914214]
  We present a model-based strategy that decouples proprioceptive and contact signals from fluidic pressure sensors embedded in a soft architected segment.<n>On a single ITH segment, this approach achieves proprioceptive shape estimation with a relative bending error of 0.11 +/- 0.02 and a contact detection rate of 97% across 178 trials.
  arXiv  Detail & Related papers  (2026-07-17T03:03:19Z)
• A Reduced Order Model for Emergent Mechanics in Woven Systems [0.098314893665023]
  Woven structures exhibit rich mechanical behaviors including anisotropic stiffness, shear-induced locking, and crimp interchange.<n>Existing models either homogenize these interactions or resolve them at prohibitive computational cost.<n>We introduce a reduced-order model that bridges this gap by representing individual weaver interactions through a system of nodes.
  arXiv  Detail & Related papers  (2026-06-22T17:43:45Z)
• Topology-Optimized Pneumatic Soft Actuator: Design and Experimental Validation [0.0]
  An existing density- and porohyperelasticity-based topology optimization framework was extended from 2D to 3D.<n>The objective was to maximize the bending response for a prescribed actuation pressure under two different strain limits.<n>The two optimized 3D designs were fabricated using stereolithography and experimentally tested to validate their performance.
  arXiv  Detail & Related papers  (2026-05-19T16:52:49Z)
• Improving Sensing Coverage and Compliance of 3D-Printed Artificial Skins Through Multi-Modal Sensing and Soft Materials [64.72383971121094]
  3D-printed artificial skins are a scalable approach to whole-body tactile and proximity coverage.<n>We present a hybrid time-of-flight (ToF) and self-capacitance (SC) sensing skin that demonstrates multi-modal sensing integration.<n>We show that combining ToF and SC modalities enables contact detection, scene reconstruction, and pressure-correlated tactile responses with the compliant covering.
  arXiv  Detail & Related papers  (2026-04-28T12:32:35Z)
• A Novel Modular Cable-Driven Soft Robotic Arm with Multi-Segment Reconfigurability [8.05713215230608]
  This paper presents a novel, modular, cable-driven soft robotic arm featuring multi-segment reconfigurability.<n>The proposed architecture enables a stackable system with independent segment control.<n>The system is fabricated from soft silicone material and incorporates embedded tendon-routing channels with a protective dual-helical tendon structure.
  arXiv  Detail & Related papers  (2026-03-02T23:29:43Z)
• SaDiT: Efficient Protein Backbone Design via Latent Structural Tokenization and Diffusion Transformers [50.18388227899971]
  We present SaDiT, a novel framework that accelerates protein backbone generation by integrating SaProt Tokenization with a Diffusion Transformer (DiT) architecture.<n>Experiments demonstrate that SaDiT outperforms state-of-the-art models, including RFDiffusion and Proteina, in both computational speed and structural viability.
  arXiv  Detail & Related papers  (2026-02-06T13:50:13Z)
• Programmable Deformation Design of Porous Soft Actuator through Volumetric-Pattern-Induced Anisotropy [1.3464152928754487]
  A novel design method is presented to realize soft porous actuators with programmable deformation by incising specific patterns into the porous foam body.<n>Our work provides a new, efficient, and scalable paradigm for the design of multi-functional soft porous robots.
  arXiv  Detail & Related papers  (2025-12-13T13:17:17Z)
• Data-Driven Nonlinear Deformation Design of 3D-Printable Shells [1.5088726951324294]
  We propose a neural network trained on experimental data to learn the design-performance relationship between 3D-printable shells and compressive force-displacement behavior. Trained on thousands of physical experiments, our network aids in both forward and inverse design to generate shells exhibiting desired elastoplastic and hyperelastic deformations.
  arXiv  Detail & Related papers  (2024-08-27T14:30:06Z)
• Transolver: A Fast Transformer Solver for PDEs on General Geometries [66.82060415622871]
  We present Transolver, which learns intrinsic physical states hidden behind discretized geometries. By calculating attention to physics-aware tokens encoded from slices, Transovler can effectively capture intricate physical correlations. Transolver achieves consistent state-of-the-art with 22% relative gain across six standard benchmarks and also excels in large-scale industrial simulations.
  arXiv  Detail & Related papers  (2024-02-04T06:37:38Z)
• Fold2Seq: A Joint Sequence(1D)-Fold(3D) Embedding-based Generative Model for Protein Design [70.27706384570723]
  We propose Fold2Seq, a novel framework for designing protein sequences conditioned on a specific target fold. We show improved or comparable performance of Fold2Seq in terms of speed, coverage, and reliability for sequence design. The unique advantages of fold-based Fold2Seq, in comparison to a structure-based deep model and RosettaDesign, become more evident on three additional real-world challenges.
  arXiv  Detail & Related papers  (2021-06-24T14:34:24Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.