Hoverflie: An empirical investigation of rotor shrouds to transform micro air vehicles into multi-modal hovercraft

• URL: http://arxiv.org/abs/2608.06707v1
• Date: Fri, 07 Aug 2026 02:02:23 GMT
• Title: Hoverflie: An empirical investigation of rotor shrouds to transform micro air vehicles into multi-modal hovercraft
• Abstract summary: Small rotorcraft intended for use indoors or around the built environment have extremely limited flight duration.<n>This paper presents the design and experimental characterization of a custom shroud system that transforms a Crazyflie 2.1 micro air vehicle into a high-efficiency hovercraft or a free-flying drone.
• Score: 1.8907108368038212
• License: http://creativecommons.org/licenses/by/4.0/
• Abstract: Small rotorcraft intended for use indoors or around the built environment have extremely limited flight duration. This paper presents the design and experimental characterization of a custom shroud system that transforms a Crazyflie 2.1 micro air vehicle into a multi-modal robot capable of operating as a high-efficiency hovercraft or a free-flying drone. A custom experimental platform was developed for precise control of hover height and rotor duty cycle, and automated data logging of lift forces. Parametric testing of duct, intake, and nozzle geometries was performed to investigate the impact of shroud configuration on in-ground-effect and free-flight performance. An empirical model is developed which, unlike typical models for ground effect in rotorcraft, captures the suckdown effect that reduces force at intermediate height. It is shown that, through proper design of the shroud, beneficial ground effects can be increased while diminishing negative effects both close to the ground and in free flight. An optimized configuration exhibited nearly three times higher in-ground-effect force while maintaining comparable out-of-ground-effect aerodynamic thrust, although the added shroud mass reduces free-flight control authority. Lightweight shrouds are manufactured using thin-film thermoformed components, and total single-charge flight time is shown to increase by 60% in-ground-effect while decreasing by only 30% in free-flight as compared to the stock drone. Finally, controlled flight in the air, hovering close to the ground, and hover-to-flight transitions are demonstrated using a simple mode-switching controller, with tracking errors reported to quantify performance. This work provides an experimentally-validated and easily adoptable foundation for future research into lightweight ground-effect vehicles and hybrid drone-hovercraft systems.

Related papers

• Design and Flight of an Ion-propelled Micro Hovercraft Leveraging Ground Proximity Effects [3.639865209180998]
  Small-scale atmospheric ion thrusters can be vastly increased when operating close to a ground plane.<n>This is the first time an ion-propelled micro hovercraft has been shown in the open literature.
  arXiv  Detail & Related papers  (2026-08-05T01:40:55Z)
• Direct Rotor Thrust Sensing and Feedback Control for Disturbance Rejection of Multirotors Using Load-cells [0.8399688944263844]
  Gust disturbances, dynamic vertical inflow and ground effect are key adverse aerodynamic phenomena that induce variations in the forces acting on a multirotor.<n> Miniature rotorcraft typically rely on simplified modelling of such effects to compute adjustments in thrust to counteract these forces.<n>This paper presents a new approach by measuring the instantaneous force of the rotors directly at the point of generation using load-cells and implementing high-speed control to accurately track the desired thrust.
  arXiv  Detail & Related papers  (2026-07-11T03:30:44Z)
• HoLoArm: Deformable Arms for Collision-Tolerant Quadrotor Flight [46.42648821424623]
  We present HoLoArm, a quadrotor with compliant arms inspired by the nodus structure of dragonfly wings.<n>Results demonstrate that HoLoArm can passively deform in any direction, including axial one, and recover within 0.3-0.6 s depending on the direction and level of the impact.<n>Drone can survive collisions at speeds up to 7.6 m/s and carry a 540 g payload while maintaining stable flight.
  arXiv  Detail & Related papers  (2026-05-25T12:37:18Z)
• Aero-World: Action-Conditioned Aerial Video Generation from Inertial Controls [57.166020875486474]
  We propose textbfAero-World, a method for converting a pretrained image-to-video diffusion model into a controllable aerial video generator.<n>A frozen latent-space Physics Probe, trained independently on real video--IMU pairs, provides differentiable inertial-consistency supervision during LoRA finetuning.<n>On AeroBench, Aero-World improves mean AAS from 57.7 to 63.6 over action-only finetuning and gives a stronger quality-control trade-off than AirScape.
  arXiv  Detail & Related papers  (2026-05-19T12:02:17Z)
• ASCENT: Transformer-Based Aircraft Trajectory Prediction in Non-Towered Terminal Airspace [54.94692733670454]
  ASCENT is a lightweight transformer-based model for multi-modal 3D aircraft trajectory forecasting.<n>It integrates domain-aware 3D coordinate normalization and parameterized predictions.
  arXiv  Detail & Related papers  (2026-03-17T14:16:10Z)
• Dynamic Modeling and Attitude Control of a Reaction-Wheel-Based Low-Gravity Bipedal Hopper [0.0]
  hopping locomotion offers high energy efficiency but is prone to mid-flight attitude instability.<n>This paper presents an underactuated bipedal hopping robot that employs an internal reaction wheel to regulate body posture.<n>The proposed framework is evaluated in MuJoCo-based simulations under lunar gravity conditions.
  arXiv  Detail & Related papers  (2026-03-11T11:35:21Z)
• A 26-Gram Butterfly-Inspired Robot Achieving Autonomous Tailless Flight [61.21669716392821]
  textitAirPulse is a 26-gram butterfly-inspired robot that achieves the first onboard, closed-loop controlled flight for a tailless two-winged platform at this scale.<n>It replicates key biomechanical traits of butterfly flight, utilizing low-aspect-ratio, compliant carbon-fiber-reinforced wings and low-frequency flapping that reproduces characteristic biological body undulations.
  arXiv  Detail & Related papers  (2026-02-06T15:58:50Z)
• Wake Vectoring for Efficient Morphing Flight [1.6799377888527687]
  We introduce a passive wake vectoring mechanism that recovers lost thrust during morphing.<n>This solution achieves up to a 40% recovery of vertical thrust in configurations where no useful thrust would otherwise be produced.<n>Our findings highlight a new direction for morphing aerial robot design, where passive aerodynamic structures, inspired by thrust vectoring in rockets and aircraft, enable efficient, agile flight without added mechanical complexity.
  arXiv  Detail & Related papers  (2025-12-04T19:31:17Z)
• A highly maneuverable flying squirrel drone with agility-improving foldable wings [3.166558866794283]
  This paper proposes a highly maneuverable drone equipped with agility-enhancing foldable wings.<n>The complex aerodynamics of the foldable wings are modeled using a physics-assisted recurrent neural network (paRNN)<n> Experimental results demonstrate that the proposed flying squirrel drone achieves a 13.1% improvement in tracking performance.
  arXiv  Detail & Related papers  (2025-04-13T14:57:11Z)
• Motion Planning and Control for Multi Vehicle Autonomous Racing at High Speeds [100.61456258283245]
  This paper presents a multi-layer motion planning and control architecture for autonomous racing. The proposed solution has been applied on a Dallara AV-21 racecar and tested at oval race tracks achieving lateral accelerations up to 25 $m/s2$.
  arXiv  Detail & Related papers  (2022-07-22T15:16:54Z)
• Neural-Fly Enables Rapid Learning for Agile Flight in Strong Winds [96.74836678572582]
  We present a learning-based approach that allows rapid online adaptation by incorporating pretrained representations through deep learning. Neural-Fly achieves precise flight control with substantially smaller tracking error than state-of-the-art nonlinear and adaptive controllers.
  arXiv  Detail & Related papers  (2022-05-13T21:55:28Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.