DuctAM: A Duct-Assisted Quadrotor-Based Aerial Manipulator Enabling High-Force Push-and-Pull Interactions

• URL: http://arxiv.org/abs/2609.15861v1
• Date: Mon, 14 Sep 2026 16:54:11 GMT
• Title: DuctAM: A Duct-Assisted Quadrotor-Based Aerial Manipulator Enabling High-Force Push-and-Pull Interactions
• Abstract summary: Push-and-pull operations require sustained horizontal forces while maintaining stable flight.<n>DuctAM is a compact aerial manipulation platform that enhances horizontal force capability for push-and-pull interactions.
• Score: 23.890768969262556
• License: http://creativecommons.org/licenses/by-nc-nd/4.0/
• Abstract: Uncrewed Aerial Manipulators (UAMs) extend the capabilities of Uncrewed Aerial Vehicles (UAVs) from perception to physical interaction. Among various aerial interactions, push-and-pull operations are fundamental manipulation primitives that require sustained horizontal forces while maintaining stable flight. In this paper, we propose DuctAM, a compact aerial manipulation platform that enhances horizontal force capability for push-and-pull interactions using two ducted fans integrated along the quadrotor interaction axis. An attitude-force decoupled control scheme enables controllable horizontal forces without requiring large attitude changes. Extensive real-world experiments are conducted to validate the DuctAM. Figure-eight trajectory tracking experiments demonstrate stable flight and accurate motion control in both quad and duct modes. Force-measurement experiments quantify the decoupled longitudinal force capability of DuctAM. Finally, representative push-and-pull interaction tasks, including cart pushing, door closing, and drawer opening, verify the practical effectiveness of DuctAM. The results show that DuctAM achieves significantly improved horizontal interaction force capability while maintaining stable flight compared with conventional UAVs.

Related papers

• Contact-Aware Incremental Model Predictive Control for an Underactuated Aerial Manipulator [0.9328991021103293]
  We present a robust contact-aware control framework for aerial writing on an underactuated platform.<n>The proposed controllers are validated on a quadrotor-based aerial manipulator with a rigid, single-link, one-degree-of-freedom (DoF) arm.
  arXiv  Detail & Related papers  (2026-09-10T15:03:02Z)
• FAM-DQ: A Dual-Quadrotor-Based Fully Actuated Aerial Manipulator for High-Torque Interaction [1.9226023650048942]
  FAM-DQ is a dual-quadrotor based fully actuated aerial manipulator.<n>It achieves a maximum torque of $1.019mathrmNcdotmathrmm$ with a total mass of $0.547mathrmkg$, corresponding to a torque-to-mass ratio of $2.28mathrmNcdotmathrmm/kg$.
  arXiv  Detail & Related papers  (2026-08-13T13:23:58Z)
• FLOAT Drone for Physical Interaction: Lateral Airflow Reduction, Wrench Modeling, and Adaptive Control [4.5429661185092085]
  This article presents FLOAT Drone, a fully actuated UAV with servo-driven control surfaces for close-proximity physical interaction.<n>A force-matched computational fluid dynamics (CFD) comparison with a tilted-rotor alternative quantifies the reduction in target-facing lateral airflow.
  arXiv  Detail & Related papers  (2026-07-05T12:14:43Z)
• U-Joint CAAMS: Experimental Evaluation of a Universal-Joint Continuum Manipulator for Aerial Manipulation [36.94429692322632]
  The proposed design uses a tubular backbone with spring-reinforced universal joints and an integrated conduit for internal routing and fluid delivery.<n>Under peak downwash, the proposed design reduces mean error by 2.5-4x in yaw, 2-45x in y-axis, and up to 5x in roll compared to the NiTi-backbone design.
  arXiv  Detail & Related papers  (2026-07-03T13:38:40Z)
• HoLoArm: Deformable Arms for Collision-Tolerant Quadrotor Flight [46.42648821424623]
  We present HoLoArm, a quadrotor with compliant arms inspired by the nodus structure of dragonfly wings.<n>Results demonstrate that HoLoArm can passively deform in any direction, including axial one, and recover within 0.3-0.6 s depending on the direction and level of the impact.<n>Drone can survive collisions at speeds up to 7.6 m/s and carry a 540 g payload while maintaining stable flight.
  arXiv  Detail & Related papers  (2026-05-25T12:37:18Z)
• ForceVLA2: Unleashing Hybrid Force-Position Control with Force Awareness for Contact-Rich Manipulation [75.39847750457626]
  ForceVLA2, an end-to-end vision-language-action framework, equips robots with hybrid force-position control and explicit force awareness.<n>To support learning and evaluation, we construct ForceVLA2-Dataset, containing 1,000 trajectories over 5 contact-rich tasks.<n>Experiments show that ForceVLA2 substantially improves success rates and reliability in contact-rich manipulation.
  arXiv  Detail & Related papers  (2026-03-16T12:03:58Z)
• Safe Whole-Body Loco-Manipulation via Combined Model and Learning-based Control [46.47619556874003]
  We propose a whole-body controller that combines a model-based admittance control for the manipulator arm with a Reinforcement Learning policy for legged locomotion.<n>The admittance controller maps external wrenches--such as those applied by a human during physical interaction--into desired end-effector velocities, allowing for compliant behavior.<n>We validate our approach in both simulation and hardware using the Unitree Go2 quadruped robot with a 6-DoF arm and wrist-mounted 6-DoF Force/Torque sensor.
  arXiv  Detail & Related papers  (2026-03-02T22:31:12Z)
• Tilt-X: Enabling Compliant Aerial Manipulation through a Tiltable-Extensible Continuum Manipulator [35.18016233072556]
  Continuum arm aerial manipulation systems offer lightweight, dexterous, and compliant interaction opportunities.<n>Existing designs allow manipulation only below the UAV which restricts their deployability in multiple directions and through clutter.<n>We present Tilt-X, a continuum arm aerial manipulator that integrates a tilting mechanism, a telescopic stage, and a cable-driven continuum section.
  arXiv  Detail & Related papers  (2026-02-27T01:05:58Z)
• Aerial Manipulation with Contact-Aware Onboard Perception and Hybrid Control [11.342874824540493]
  Aerial manipulation (AM) promises to move Unmanned Aerial Vehicles (UAVs) beyond passive inspection to contact-rich tasks such as grasping, assembly, and in-situ maintenance.<n>We present a fully onboard perception-control pipeline for contact-rich AM that achieves accurate motion tracking and regulated contact wrenches without external motion capture (MoCap)<n> Experiments show that our approach closes the perception-to-wrench loop using only onboard sensing, yielding a velocity estimation improvement of 66.01% at contact, reliable target approach, and stable force holding-pointing toward deployable, in-the-wild aerial manipulation.
  arXiv  Detail & Related papers  (2026-02-09T04:10:39Z)
• UniForce: A Unified Latent Force Model for Robot Manipulation with Diverse Tactile Sensors [51.88112610411651]
  We propose a novel unified tactile representation learning framework that learns a shared latent force space across diverse tactile sensors.<n>UniForce reduces cross-sensor domain shift by jointly modeling inverse dynamics (image-to-force) and forward dynamics (force-to-image)<n>To avoid reliance on expensive external force/torque (F/T) sensors, we exploit static equilibrium and collect force-paired data via direct sensor--object--sensor interactions.
  arXiv  Detail & Related papers  (2026-02-01T11:03:01Z)
• FlyAware: Inertia-Aware Aerial Manipulation via Vision-Based Estimation and Post-Grasp Adaptation [38.97192455287927]
  This letter presents a novel onboard framework for robust aerial manipulation.<n>The proposed system integrates a vision-based pre-grasp inertia estimation module with a post-grasp adaptation mechanism.<n>For control, we develop an inertia-aware adaptive control strategy based on gain scheduling.
  arXiv  Detail & Related papers  (2026-01-30T08:02:33Z)
• Tracking the Unstable: Appearance-Guided Motion Modeling for Robust Multi-Object Tracking in UAV-Captured Videos [58.156141601478794]
  Multi-object tracking (UAVT) aims to track multiple objects while maintaining consistent identities across frames of a given video.<n>Existing methods typically model motion cues and appearance separately, overlooking their interplay and resulting in suboptimal tracking performance.<n>We propose AMOT, which exploits appearance and motion cues through two key components: an Appearance-Motion Consistency (AMC) matrix and a Motion-aware Track Continuation (MTC) module.
  arXiv  Detail & Related papers  (2025-08-03T12:06:47Z)
• FLOAT Drone: A Fully-actuated Coaxial Aerial Robot for Close-Proximity Operations [4.5231181198147485]
  We present FLOAT Drone (FuLly-actuated cO Aerial roboT), a novel fully-actuated UAV featuring two key structural innovations.<n>By integrating control surfaces into fully-actuated systems for the first time, we significantly suppress lateral airflow disturbances during operations.<n>Furthermore, a coaxial dual-rotor configuration enables a compact size while maintaining high hovering efficiency.
  arXiv  Detail & Related papers  (2025-03-02T08:30:30Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.