Tilt-X: Enabling Compliant Aerial Manipulation through a Tiltable-Extensible Continuum Manipulator

• URL: http://arxiv.org/abs/2602.23576v1
• Date: Fri, 27 Feb 2026 01:05:58 GMT
• Title: Tilt-X: Enabling Compliant Aerial Manipulation through a Tiltable-Extensible Continuum Manipulator
• Abstract summary: Continuum arm aerial manipulation systems offer lightweight, dexterous, and compliant interaction opportunities.<n>Existing designs allow manipulation only below the UAV which restricts their deployability in multiple directions and through clutter.<n>We present Tilt-X, a continuum arm aerial manipulator that integrates a tilting mechanism, a telescopic stage, and a cable-driven continuum section.
• Score: 35.18016233072556
• License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
• Abstract: Aerial manipulators extend the reach and manipulation capabilities of uncrewed multirotor aerial vehicles for inspection, agriculture, sampling, and delivery. Continuum arm aerial manipulation systems offer lightweight, dexterous, and compliant interaction opportunities. Existing designs allow manipulation only below the UAV which restricts their deployability in multiple directions and through clutter. They are also sensitive to propeller downwash. Addressing these limitations, we present Tilt-X, a continuum arm aerial manipulator that integrates a tilting mechanism, a telescopic stage, and a cable-driven continuum section. We present its design and kinematic model and validate it through flight demonstrations. Tilt-X enables a volumetric workspace with up to 75 mm extension and planar orientations between 0$^\circ$ to 90$^\circ$. Experiments comparing end effector pose with and without downwash quantitatively measure its accuracy, providing critical evidence to guide the design and control of reliable aerial manipulators. Results show stabilisation of end effector pose as the manipulator extends out of the propeller influence zone.

Related papers

• DuctAM: A Duct-Assisted Quadrotor-Based Aerial Manipulator Enabling High-Force Push-and-Pull Interactions [23.890768969262556]
  Push-and-pull operations require sustained horizontal forces while maintaining stable flight.<n>DuctAM is a compact aerial manipulation platform that enhances horizontal force capability for push-and-pull interactions.
  arXiv  Detail & Related papers  (2026-09-14T16:54:11Z)
• An Experimental Study of Downwash Effects on a Continuum Manipulator Integrated with a Multirotor UAV [0.0]
  Continuum arm aerial manipulation systems leverage soft-manipulator compliance and dexterity for tasks in confined or hazardous environments.<n> propeller downwash can degrade performance, particularly near walls and the ground.<n>This letter experimentally studies downwash-induced kinematic deviations of a tendon-driven continuum manipulator integrated with a multirotor platform.
  arXiv  Detail & Related papers  (2026-08-19T03:54:02Z)
• Effector-Centric NMPC of Tiltable-Multirotors for Offset-Free Omnidirectional Aerial Manipulation [9.325443556436436]
  This work presents a design analysis and a wrench-based control framework for tiltable-multirotors in aerial manipulation.<n>A four-rotor tiltable configuration provides a balance between interference-free propeller sizing and hovering efficiency.<n>We develop an effector-centric nonlinear model predictive control framework that integrates design choices, handling, and disturbance compensation.
  arXiv  Detail & Related papers  (2026-08-18T14:18:48Z)
• A Model-Based Decoupling Strategy for Proprioception and Contact Sensing in an Architected Soft Manipulator [49.225033144914214]
  We present a model-based strategy that decouples proprioceptive and contact signals from fluidic pressure sensors embedded in a soft architected segment.<n>On a single ITH segment, this approach achieves proprioceptive shape estimation with a relative bending error of 0.11 +/- 0.02 and a contact detection rate of 97% across 178 trials.
  arXiv  Detail & Related papers  (2026-07-17T03:03:19Z)
• FLOAT Drone for Physical Interaction: Lateral Airflow Reduction, Wrench Modeling, and Adaptive Control [4.5429661185092085]
  This article presents FLOAT Drone, a fully actuated UAV with servo-driven control surfaces for close-proximity physical interaction.<n>A force-matched computational fluid dynamics (CFD) comparison with a tilted-rotor alternative quantifies the reduction in target-facing lateral airflow.
  arXiv  Detail & Related papers  (2026-07-05T12:14:43Z)
• U-Joint CAAMS: Experimental Evaluation of a Universal-Joint Continuum Manipulator for Aerial Manipulation [36.94429692322632]
  The proposed design uses a tubular backbone with spring-reinforced universal joints and an integrated conduit for internal routing and fluid delivery.<n>Under peak downwash, the proposed design reduces mean error by 2.5-4x in yaw, 2-45x in y-axis, and up to 5x in roll compared to the NiTi-backbone design.
  arXiv  Detail & Related papers  (2026-07-03T13:38:40Z)
• Aero-World: Action-Conditioned Aerial Video Generation from Inertial Controls [57.166020875486474]
  We propose textbfAero-World, a method for converting a pretrained image-to-video diffusion model into a controllable aerial video generator.<n>A frozen latent-space Physics Probe, trained independently on real video--IMU pairs, provides differentiable inertial-consistency supervision during LoRA finetuning.<n>On AeroBench, Aero-World improves mean AAS from 57.7 to 63.6 over action-only finetuning and gives a stronger quality-control trade-off than AirScape.
  arXiv  Detail & Related papers  (2026-05-19T12:02:17Z)
• What Drives Representation Steering? A Mechanistic Case Study on Steering Refusal [53.189667624047416]
  We show that different steering methodologies leverage functionally interchangeable circuits when applied at the same layer.<n>We show that steering vectors can be sparsified by up to 90-99% while retaining most performance.
  arXiv  Detail & Related papers  (2026-04-09T17:57:14Z)
• A Passive Elastic-Folding Mechanism for Stackable Airdrop Sensors [4.0932343624382925]
  Air-dispersed sensor networks deployed from aerial robotic systems provide a low-cost approach to wide-area environmental monitoring.<n>Here, we introduce a passive elastic-folding hinge mechanism that transforms sensors from a flat, stackable form into a three-dimensional structure upon release.
  arXiv  Detail & Related papers  (2026-03-19T13:09:18Z)
• ASCENT: Transformer-Based Aircraft Trajectory Prediction in Non-Towered Terminal Airspace [54.94692733670454]
  ASCENT is a lightweight transformer-based model for multi-modal 3D aircraft trajectory forecasting.<n>It integrates domain-aware 3D coordinate normalization and parameterized predictions.
  arXiv  Detail & Related papers  (2026-03-17T14:16:10Z)
• Safe Whole-Body Loco-Manipulation via Combined Model and Learning-based Control [46.47619556874003]
  We propose a whole-body controller that combines a model-based admittance control for the manipulator arm with a Reinforcement Learning policy for legged locomotion.<n>The admittance controller maps external wrenches--such as those applied by a human during physical interaction--into desired end-effector velocities, allowing for compliant behavior.<n>We validate our approach in both simulation and hardware using the Unitree Go2 quadruped robot with a 6-DoF arm and wrist-mounted 6-DoF Force/Torque sensor.
  arXiv  Detail & Related papers  (2026-03-02T22:31:12Z)
• Learning Agile and Robust Omnidirectional Aerial Motion on Overactuated Tiltable-Quadrotors [15.511018281264674]
  This work investigates reinforcement learning for omnidirectional aerial motion control on over-actuated tiltable quadrotors.<n>We present a learning-based control framework that enables efficient acquisition of coordinated rotor-joint behaviors for reaching target poses.
  arXiv  Detail & Related papers  (2026-02-25T05:13:25Z)
• Global End-Effector Pose Control of an Underactuated Aerial Manipulator via Reinforcement Learning [15.634803296068009]
  Aerial manipulators, which combine robotic arms with multi-rotor drones, face strict constraints on arm weight and mechanical complexity.<n>We study a lightweight 2-degree-of-freedom (DoF) arm mounted on a quadrotor via a differential mechanism, capable of full six-DoF end-effector pose control.
  arXiv  Detail & Related papers  (2025-12-24T10:00:01Z)
• Tracking the Unstable: Appearance-Guided Motion Modeling for Robust Multi-Object Tracking in UAV-Captured Videos [58.156141601478794]
  Multi-object tracking (UAVT) aims to track multiple objects while maintaining consistent identities across frames of a given video.<n>Existing methods typically model motion cues and appearance separately, overlooking their interplay and resulting in suboptimal tracking performance.<n>We propose AMOT, which exploits appearance and motion cues through two key components: an Appearance-Motion Consistency (AMC) matrix and a Motion-aware Track Continuation (MTC) module.
  arXiv  Detail & Related papers  (2025-08-03T12:06:47Z)
• OmniControl: Control Any Joint at Any Time for Human Motion Generation [46.293854851116215]
  We present a novel approach named OmniControl for incorporating flexible spatial control signals into a text-conditioned human motion generation model. We propose analytic spatial guidance that ensures the generated motion can tightly conform to the input control signals. At the same time, realism guidance is introduced to refine all the joints to generate more coherent motion.
  arXiv  Detail & Related papers  (2023-10-12T17:59:38Z)
• Actuator Trajectory Planning for UAVs with Overhead Manipulator using Reinforcement Learning [0.3222802562733786]
  We develop a UAV equipped with a controllable arm with two degrees of freedom to carry out actuation tasks on the fly. Our solution is based on employing a Q-learning method to control the trajectory of the tip of the arm, also called end-effector. Our method achieves 92% accuracy in terms of average displacement error using Q-learning with 15,000 episodes.
  arXiv  Detail & Related papers  (2023-08-24T15:06:23Z)
• Kinematically-Decoupled Impedance Control for Fast Object Visual Servoing and Grasping on Quadruped Manipulators [18.279073092727025]
  We propose a control pipeline for SAG (Searching, Approaching, and Grasping) of objects, based on a decoupled arm kinematic chain and impedance control. The kinematic decoupling allows for fast end-effector motions and recovery that leads to robust visual servoing. We demonstrate the performance and robustness of the proposed approach with various experiments on our 140 kg HyQReal quadruped robot equipped with a 7-DoF manipulator arm.
  arXiv  Detail & Related papers  (2023-07-10T21:51:06Z)
• VAE-Loco: Versatile Quadruped Locomotion by Learning a Disentangled Gait Representation [78.92147339883137]
  We show that it is pivotal in increasing controller robustness by learning a latent space capturing the key stance phases constituting a particular gait. We demonstrate that specific properties of the drive signal map directly to gait parameters such as cadence, footstep height and full stance duration. The use of a generative model facilitates the detection and mitigation of disturbances to provide a versatile and robust planning framework.
  arXiv  Detail & Related papers  (2022-05-02T19:49:53Z)
• Aligning an optical interferometer with beam divergence control and continuous action space [64.71260357476602]
  We implement vision-based alignment of an optical Mach-Zehnder interferometer with a confocal telescope in one arm. In an experimental evaluation, the agent significantly outperforms an existing solution and a human expert.
  arXiv  Detail & Related papers  (2021-07-09T14:23:01Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.