A Learning-based Method for Online Adjustment of C-arm Cone-Beam CT Source Trajectories for Artifact Avoidance

• URL: http://arxiv.org/abs/2008.06262v1
• Date: Fri, 14 Aug 2020 09:23:50 GMT
• Title: A Learning-based Method for Online Adjustment of C-arm Cone-Beam CT Source Trajectories for Artifact Avoidance
• Authors: Mareike Thies, Jan-Nico Z\"ach, Cong Gao, Russell Taylor, Nassir Navab, Andreas Maier, Mathias Unberath
• Abstract summary: The reconstruction quality attainable with commercial CBCT devices is insufficient due to metal artifacts in the presence of pedicle screws. We propose to adjust the C-arm CBCT source trajectory during the scan to optimize reconstruction quality with respect to a certain task. We demonstrate that convolutional neural networks trained on realistically simulated data are capable of predicting quality metrics that enable scene-specific adjustments of the CBCT source trajectory.
• Score: 47.345403652324514
• License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
• Abstract: During spinal fusion surgery, screws are placed close to critical nerves suggesting the need for highly accurate screw placement. Verifying screw placement on high-quality tomographic imaging is essential. C-arm Cone-beam CT (CBCT) provides intraoperative 3D tomographic imaging which would allow for immediate verification and, if needed, revision. However, the reconstruction quality attainable with commercial CBCT devices is insufficient, predominantly due to severe metal artifacts in the presence of pedicle screws. These artifacts arise from a mismatch between the true physics of image formation and an idealized model thereof assumed during reconstruction. Prospectively acquiring views onto anatomy that are least affected by this mismatch can, therefore, improve reconstruction quality. We propose to adjust the C-arm CBCT source trajectory during the scan to optimize reconstruction quality with respect to a certain task, i.e. verification of screw placement. Adjustments are performed on-the-fly using a convolutional neural network that regresses a quality index for possible next views given the current x-ray image. Adjusting the CBCT trajectory to acquire the recommended views results in non-circular source orbits that avoid poor images, and thus, data inconsistencies. We demonstrate that convolutional neural networks trained on realistically simulated data are capable of predicting quality metrics that enable scene-specific adjustments of the CBCT source trajectory. Using both realistically simulated data and real CBCT acquisitions of a semi-anthropomorphic phantom, we show that tomographic reconstructions of the resulting scene-specific CBCT acquisitions exhibit improved image quality particularly in terms of metal artifacts. Since the optimization objective is implicitly encoded in a neural network, the proposed approach overcomes the need for 3D information at run-time.

Related papers

• Rotational Augmented Noise2Inverse for Low-dose Computed Tomography Reconstruction [83.73429628413773]
  Supervised deep learning methods have shown the ability to remove noise in images but require accurate ground truth. We propose a novel self-supervised framework for LDCT, in which ground truth is not required for training the convolutional neural network (CNN) Numerical and experimental results show that the reconstruction accuracy of N2I with sparse views is degrading while the proposed rotational augmented Noise2Inverse (RAN2I) method keeps better image quality over a different range of sampling angles.
  arXiv  Detail & Related papers  (2023-12-19T22:40:51Z)
• Teeth Localization and Lesion Segmentation in CBCT Images using SpatialConfiguration-Net and U-Net [0.4915744683251149]
  The localization of teeth and segmentation of periapical lesions are crucial tasks for clinical diagnosis and treatment planning. In this study, we propose a deep learning-based method utilizing two convolutional neural networks. The method achieves a 97.3% accuracy for teeth localization, along with a promising sensitivity and specificity of 0.97 and 0.88, respectively, for subsequent lesion detection.
  arXiv  Detail & Related papers  (2023-12-19T14:23:47Z)
• INeAT: Iterative Neural Adaptive Tomography [34.84974955073465]
  Iterative Neural Adaptive Tomography (INeAT) incorporates posture optimization to counteract the influence of posture perturbations in data. We demonstrate that INeAT achieves artifact-suppressed and resolution-enhanced reconstruction in scenarios with significant pose disturbances.
  arXiv  Detail & Related papers  (2023-11-03T01:00:36Z)
• Deep learning network to correct axial and coronal eye motion in 3D OCT retinal imaging [65.47834983591957]
  We propose deep learning based neural networks to correct axial and coronal motion artifacts in OCT based on a single scan. The experimental result shows that the proposed method can effectively correct motion artifacts and achieve smaller error than other methods.
  arXiv  Detail & Related papers  (2023-05-27T03:55:19Z)
• Convolutional Neural Network to Restore Low-Dose Digital Breast Tomosynthesis Projections in a Variance Stabilization Domain [15.149874383250236]
  convolution neural network (CNN) proposed to restore low-dose (LD) projections to image quality equivalent to a standard full-dose (FD) acquisition. Network achieved superior results in terms of the mean squared error (MNSE), normalized training time and noise spatial correlation compared with networks trained with traditional data-driven methods.
  arXiv  Detail & Related papers  (2022-03-22T13:31:47Z)
• Metal Artifact Reduction with Intra-Oral Scan Data for 3D Low Dose Maxillofacial CBCT Modeling [0.7444835592104696]
  A two-stage metal artifact reduction method is proposed for accurate 3D low-dose maxillofacial CBCT modeling. In the first stage, an image-to-image deep learning network is employed to mitigate metal-related artifacts. In the second stage, a 3D maxillofacial model is constructed by segmenting the bones from the dental CBCT image corrected.
  arXiv  Detail & Related papers  (2022-02-08T00:24:41Z)
• Self-Attention Generative Adversarial Network for Iterative Reconstruction of CT Images [0.9208007322096533]
  The aim of this study is to train a single neural network to reconstruct high-quality CT images from noisy or incomplete data. The network includes a self-attention block to model long-range dependencies in the data. Our approach is shown to have comparable overall performance to CIRCLE GAN, while outperforming the other two approaches.
  arXiv  Detail & Related papers  (2021-12-23T19:20:38Z)
• 3D Reconstruction of Curvilinear Structures with Stereo Matching DeepConvolutional Neural Networks [52.710012864395246]
  We propose a fully automated pipeline for both detection and matching of curvilinear structures in stereo pairs. We mainly focus on 3D reconstruction of dislocations from stereo pairs of TEM images.
  arXiv  Detail & Related papers  (2021-10-14T23:05:47Z)
• Adaptive Gradient Balancing for UndersampledMRI Reconstruction and Image-to-Image Translation [60.663499381212425]
  We enhance the image quality by using a Wasserstein Generative Adversarial Network combined with a novel Adaptive Gradient Balancing technique. In MRI, our method minimizes artifacts, while maintaining a high-quality reconstruction that produces sharper images than other techniques.
  arXiv  Detail & Related papers  (2021-04-05T13:05:22Z)
• Probabilistic 3D surface reconstruction from sparse MRI information [58.14653650521129]
  We present a novel probabilistic deep learning approach for concurrent 3D surface reconstruction from sparse 2D MR image data and aleatoric uncertainty prediction. Our method is capable of reconstructing large surface meshes from three quasi-orthogonal MR imaging slices from limited training sets.
  arXiv  Detail & Related papers  (2020-10-05T14:18:52Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.