An even-load-distribution design for composite bolted joints using a novel circuit model and artificial neural networks

• URL: http://arxiv.org/abs/2105.07194v1
• Date: Sat, 15 May 2021 10:10:47 GMT
• Title: An even-load-distribution design for composite bolted joints using a novel circuit model and artificial neural networks
• Authors: Cheng Qiu, Yuzi Han, Logesh Shanmugam, Fengyang Jiang, Zhidong Guan, Shanyi Du, Jinglei Yang
• Abstract summary: We propose a machine learning-based framework as an optimization method. A novel circuit model is established to generate data samples for the training of artificial networks. A database for all the possible inputs in the design space is built through the machine learning model.
• Score: 1.8472148461613158
• License: http://creativecommons.org/licenses/by/4.0/
• Abstract: Due to the brittle feature of carbon fiber reinforced plastic laminates, mechanical multi-joint within these composite components show uneven load distribution for each bolt, which weaken the strength advantage of composite laminates. In order to reduce this defect and achieve the goal of even load distribution in mechanical joints, we propose a machine learning-based framework as an optimization method. Since that the friction effect has been proven to be a significant factor in determining bolt load distribution, our framework aims at providing optimal parameters including bolt-hole clearances and tightening torques for a minimum unevenness of bolt load. A novel circuit model is established to generate data samples for the training of artificial networks at a relatively low computational cost. A database for all the possible inputs in the design space is built through the machine learning model. The optimal dataset of clearances and torques provided by the database is validated by both the finite element method, circuit model, and an experimental measurement based on the linear superposition principle, which shows the effectiveness of this general framework for the optimization problem. Then, our machine learning model is further compared and worked in collaboration with commonly used optimization algorithms, which shows the potential of greatly increasing computational efficiency for the inverse design problem.

Related papers

• Task-Oriented Real-time Visual Inference for IoVT Systems: A Co-design Framework of Neural Networks and Edge Deployment [61.20689382879937]
  Task-oriented edge computing addresses this by shifting data analysis to the edge. Existing methods struggle to balance high model performance with low resource consumption. We propose a novel co-design framework to optimize neural network architecture.
  arXiv  Detail & Related papers  (2024-10-29T19:02:54Z)
• Machine Learning Based Optimal Design of Fibrillar Adhesives [41.94295877935867]
  Fibrillar adhesion, observed in animals like beetles, spiders, and geckos, relies on nanoscopic or microscopic fibrils to enhance surface adhesion via 'contact splitting' Recent studies suggest that functional grading of fibril properties can improve adhesion, but this is a complex design challenge that has only been explored in simplified geometries. We propose an ML-based tool that optimize the distribution of fibril compliance to maximize adhesive strength.
  arXiv  Detail & Related papers  (2024-09-09T09:26:48Z)
• Aligning Optimization Trajectories with Diffusion Models for Constrained Design Generation [17.164961143132473]
  We introduce a learning framework that demonstrates the efficacy of aligning the sampling trajectory of diffusion models with the optimization trajectory derived from traditional physics-based methods. Our method allows for generating feasible and high-performance designs in as few as two steps without the need for expensive preprocessing, external surrogate models, or additional labeled data. Our results demonstrate that TA outperforms state-of-the-art deep generative models on in-distribution configurations and halves the inference computational cost.
  arXiv  Detail & Related papers  (2023-05-29T09:16:07Z)
• End-to-End Meta-Bayesian Optimisation with Transformer Neural Processes [52.818579746354665]
  This paper proposes the first end-to-end differentiable meta-BO framework that generalises neural processes to learn acquisition functions via transformer architectures. We enable this end-to-end framework with reinforcement learning (RL) to tackle the lack of labelled acquisition data.
  arXiv  Detail & Related papers  (2023-05-25T10:58:46Z)
• Self-learning locally-optimal hypertuning using maximum entropy, and comparison of machine learning approaches for estimating fatigue life in composite materials [0.0]
  We develop an ML nearest-neighbors-alike algorithm based on the principle of maximum entropy to predict fatigue damage. The predictions achieve a good level of accuracy, similar to other ML algorithms.
  arXiv  Detail & Related papers  (2022-10-19T12:20:07Z)
• Efficient Micro-Structured Weight Unification and Pruning for Neural Network Compression [56.83861738731913]
  Deep Neural Network (DNN) models are essential for practical applications, especially for resource limited devices. Previous unstructured or structured weight pruning methods can hardly truly accelerate inference. We propose a generalized weight unification framework at a hardware compatible micro-structured level to achieve high amount of compression and acceleration.
  arXiv  Detail & Related papers  (2021-06-15T17:22:59Z)
• Machine Learning Framework for Quantum Sampling of Highly-Constrained, Continuous Optimization Problems [101.18253437732933]
  We develop a generic, machine learning-based framework for mapping continuous-space inverse design problems into surrogate unconstrained binary optimization problems. We showcase the framework's performance on two inverse design problems by optimizing thermal emitter topologies for thermophotovoltaic applications and (ii) diffractive meta-gratings for highly efficient beam steering.
  arXiv  Detail & Related papers  (2021-05-06T02:22:23Z)
• Fitting the Search Space of Weight-sharing NAS with Graph Convolutional Networks [100.14670789581811]
  We train a graph convolutional network to fit the performance of sampled sub-networks. With this strategy, we achieve a higher rank correlation coefficient in the selected set of candidates.
  arXiv  Detail & Related papers  (2020-04-17T19:12:39Z)
• Structured Sparsification with Joint Optimization of Group Convolution and Channel Shuffle [117.95823660228537]
  We propose a novel structured sparsification method for efficient network compression. The proposed method automatically induces structured sparsity on the convolutional weights. We also address the problem of inter-group communication with a learnable channel shuffle mechanism.
  arXiv  Detail & Related papers  (2020-02-19T12:03:10Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.