Current Paths in an Atomic Precision Advanced Manufactured Device Imaged by Nitrogen-Vacancy Diamond Magnetic Microscopy

• URL: http://arxiv.org/abs/2207.14254v1
• Date: Thu, 28 Jul 2022 17:38:51 GMT
• Title: Current Paths in an Atomic Precision Advanced Manufactured Device Imaged by Nitrogen-Vacancy Diamond Magnetic Microscopy
• Authors: Luca Basso, Pauli Kehayias, Jacob Henshaw, Maziar Saleh Ziabari, Heejun Byeon, Michael P. Lilly, Ezra Bussmann, Deanna M. Campbell, Shashank Misra, Andrew M. Mounce
• Abstract summary: Nitrogen-vacancy (NV) wide-field magnetic imaging of stray magnetic fields from surface current densities flowing in an APAM test device over a mm-field of view with mum-resolution. Analysis on the current density reconstructed map showed a projected sensitivity of 0.03 A/m, corresponding to a smallest detectable current in the 200 mum-wide APAM ribbon of 6 muA. These results demonstrate the failure analysis capability of NV wide-field magnetometry for APAM materials, opening the possibility to investigate other cutting-edge microelectronic devices.
• Score: 0.0
• License: http://creativecommons.org/licenses/by/4.0/
• Abstract: The recently-developed ability to control phosphorous-doping of silicon at an atomic level using scanning tunneling microscopy (STM), a technique known as atomic-precision-advanced-manufacturing (APAM), has allowed us to tailor electronic devices with atomic precision, and thus has emerged as a way to explore new possibilities in Si electronics. In these applications, critical questions include where current flow is actually occurring in or near APAM structures as well as whether leakage currents are present. In general, detection and mapping of current flow in APAM structures are valuable diagnostic tools to obtain reliable devices in digital-enhanced applications. In this paper, we performed nitrogen-vacancy (NV) wide-field magnetic imaging of stray magnetic fields from surface current densities flowing in an APAM test device over a mm-field of view with {\mu}m-resolution. To do this, we integrated a diamond having a surface NV ensemble with the device (patterned in two parallel mm-sized ribbons), then mapped the magnetic field from the DC current injected in the APAM device in a home-built NV wide-field microscope. The 2D magnetic field maps were used to reconstruct the surface current density, allowing us to obtain information on current paths, device failures such as choke points where current flow is impeded, and current leakages outside the APAM-defined P-doped regions. Analysis on the current density reconstructed map showed a projected sensitivity of ~0.03 A/m, corresponding to a smallest detectable current in the 200 {\mu}m-wide APAM ribbon of ~6 {\mu}A. These results demonstrate the failure analysis capability of NV wide-field magnetometry for APAM materials, opening the possibility to investigate other cutting-edge microelectronic devices.

Related papers

• Vector Magnetic Current Imaging of an 8 nm Process Node Chip and 3D Current Distributions Using the Quantum Diamond Microscope [1.2233362977312945]
  We present the measurement of 2D current distributions in an 8-nm flip chip IC and 3D current distributions in a multi-layer PCB. Magnetic field emanations from the C4 bumps in the flip chip dominate the QDM measurements. We show how magnetic field images of individual layers can be subtracted from the magnetic field image of the total structure.
  arXiv  Detail & Related papers  (2022-02-16T15:23:30Z)
• Imaging of sub-$\mu$A currents in bilayer graphene using a scanning diamond magnetometer [0.0]
  We report on sensitive magnetic imaging of two-dimensional current distributions in bilayer graphene at room temperature. Current density maps reveal local variations in the flow pattern and global tuning of current flow via the back-gate potential. Our experiments demonstrate the feasibility for imaging subtle features of nanoscale transport in two-dimensional materials and conductors.
  arXiv  Detail & Related papers  (2022-01-18T12:53:46Z)
• Three-dimensional imaging of integrated-circuit activity using quantum defects in diamond [0.0]
  We use near-surface nitrogen-vacancy centres in diamond to probe Oersted fields created by current flowing within a multi-layered integrated circuit in pre-development. We show the reconstruction of the three-dimensional components of the current density with a magnitude down to about $approx 10,rm mu A / mu m2$ and sub-micron spatial resolution at room temperature.
  arXiv  Detail & Related papers  (2021-12-22T22:16:19Z)
• TOF-SIMS Analysis of Decoherence Sources in Nb Superconducting Resonators [48.7576911714538]
  Superconducting qubits have emerged as a potentially foundational platform technology. Material quality and interfacial structures continue to curb device performance. Two-level system defects in the thin film and adjacent regions introduce noise and dissipate electromagnetic energy.
  arXiv  Detail & Related papers  (2021-08-30T22:22:47Z)
• High speed microcircuit and synthetic biosignal widefield imaging using nitrogen vacancies in diamond [44.62475518267084]
  We show how to image signals from a microscopic lithographically patterned circuit at the micrometer scale. Using a new type of lock-in amplifier camera, we demonstrate sub-millisecond spatially resolved recovery of AC and pulsed electrical current signals. Finally, we demonstrate as a proof of principle the recovery of synthetic signals replicating the exact form of signals in a biological neural network.
  arXiv  Detail & Related papers  (2021-07-29T16:27:39Z)
• Near-Field Terahertz Nanoscopy of Coplanar Microwave Resonators [61.035185179008224]
  Superconducting quantum circuits are one of the leading quantum computing platforms. To advance superconducting quantum computing to a point of practical importance, it is critical to identify and address material imperfections that lead to decoherence. Here, we use terahertz Scanning Near-field Optical Microscopy to probe the local dielectric properties and carrier concentrations of wet-etched aluminum resonators on silicon.
  arXiv  Detail & Related papers  (2021-06-24T11:06:34Z)
• BIGDML: Towards Exact Machine Learning Force Fields for Materials [55.944221055171276]
  Machine-learning force fields (MLFF) should be accurate, computationally and data efficient, and applicable to molecules, materials, and interfaces thereof. Here, we introduce the Bravais-Inspired Gradient-Domain Machine Learning approach and demonstrate its ability to construct reliable force fields using a training set with just 10-200 atoms.
  arXiv  Detail & Related papers  (2021-06-08T10:14:57Z)
• An integrated magnetometry platform with stackable waveguide-assisted detection channels for sensing arrays [45.82374977939355]
  We present a novel architecture which allows us to create NV$-$-centers a few nanometers below the diamond surface. We experimentally verify the coupling efficiency, showcase the detection of magnetic resonance signals through the waveguides and perform first proof-of-principle experiments in magnetic field and temperature sensing. In the future, our approach will enable the development of two-dimensional sensing arrays facilitating spatially and temporally correlated magnetometry.
  arXiv  Detail & Related papers  (2020-12-04T12:59:29Z)
• Magnetic Field Fingerprinting of Integrated Circuit Activity with a Quantum Diamond Microscope [0.9546614537373657]
  Current density distributions in active integrated circuits (ICs) result in patterns of magnetic fields that contain structural and functional information about the IC. Magnetic fields pass through standard materials used by the semiconductor industry and provide a powerful means to fingerprint IC activity for security and failure analysis applications. Here, we demonstrate high spatial resolution, wide field-of-view, vector magnetic field imaging of static (DC) magnetic field emanations from an IC in different active states using a Quantum Diamond Microscope.
  arXiv  Detail & Related papers  (2020-04-07T20:58:56Z)
• Optimisation of a diamond nitrogen vacancy centre magnetometer for sensing of biological signals [44.62475518267084]
  We present advances in biomagnetometry using nitrogen vacancy centres in diamond. We show magnetic field sensitivity of approximately 100 pT/$sqrtHz$ in the DC/low frequency range using a setup designed for biological measurements.
  arXiv  Detail & Related papers  (2020-04-05T18:44:34Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.