Development of KI-TWPAs for the DARTWARS project
- URL: http://arxiv.org/abs/2402.12295v1
- Date: Mon, 19 Feb 2024 17:18:25 GMT
- Title: Development of KI-TWPAs for the DARTWARS project
- Authors: Felix Ahrens, Elena Ferri, Guerino Avallone, Carlo Barone, Matteo
Borghesi, Luca Callegaro, Giovanni Carapella, Anna Paola Caricato, Iacopo
Carusotto, Alessandro Cian, Alessandro D'Elia, Daniele Di Gioacchino,
Emanuele Enrico, Paolo Falferi, Luca Fasolo, Marco Faverzani, Giovanni
Filatrella, Claudio Gatti, Andrea Giachero, Damiano Giubertoni, Veronica
Granata, Claudio Guarcello, Danilo Labranca, Angelo Leo, Carlo Ligi, Giovanni
Maccarrone, Federica Mantegazzini, Benno Margesin, Giuseppe Maruccio, Renato
Mezzena, Anna Grazia Monteduro, Roberto Moretti, Angelo Nucciotti, Luca
Oberto, Luca Origo, Sergio Pagano, Alex Stephane Piedjou, Luca Piersanti,
Alessio Rettaroli, Silvia Rizzato, Simone Tocci, Andrea Vinante, Mario
Zannoni
- Abstract summary: Noise at the quantum limit over a broad bandwidth is a fundamental requirement for future cryogenic experiments.
We develop Kinetic Inductance Travelling-Wave Parametric Amplifiers (KI-TWPAs) for low temperature detectors and qubit read-out.
KI-TWPAs are typically operated in a threewave mixing (3WM) mode and are characterised by a high gain, a high saturation power, a large amplification bandwidth and nearly quantum limited noise performance.
- Score: 45.045423476064414
- License: http://creativecommons.org/licenses/by/4.0/
- Abstract: Noise at the quantum limit over a broad bandwidth is a fundamental
requirement for future cryogenic experiments for neutrino mass measurements,
dark matter searches and Cosmic Microwave Background (CMB) measurements as well
as for fast high-fidelity read-out of superconducting qubits. In the last
years, Josephson Parametric Amplifiers (JPA) have demonstrated noise levels
close to the quantum limit, but due to their narrow bandwidth, only few
detectors or qubits per line can be read out in parallel. An alternative and
innovative solution is based on superconducting parametric amplification
exploiting the travelling-wave concept. Within the DARTWARS (Detector Array
Readout with Travelling Wave AmplifieRS) project, we develop Kinetic Inductance
Travelling-Wave Parametric Amplifiers (KI-TWPAs) for low temperature detectors
and qubit read-out. KI-TWPAs are typically operated in a threewave mixing (3WM)
mode and are characterised by a high gain, a high saturation power, a large
amplification bandwidth and nearly quantum limited noise performance. The goal
of the DARTWARS project is to optimise the KI-TWPA design, explore new
materials, and investigate alternative fabrication processes in order to
enhance the overall performance of the amplifier. In this contribution we
present the advancements made by the DARTWARS collaboration to produce a
working prototype of a KI-TWPA, from the fabrication to the characterisation.
Related papers
- Function Approximation for Reinforcement Learning Controller for Energy from Spread Waves [69.9104427437916]
Multi-generator Wave Energy Converters (WEC) must handle multiple simultaneous waves coming from different directions called spread waves.
These complex devices need controllers with multiple objectives of energy capture efficiency, reduction of structural stress to limit maintenance, and proactive protection against high waves.
In this paper, we explore different function approximations for the policy and critic networks in modeling the sequential nature of the system dynamics.
arXiv Detail & Related papers (2024-04-17T02:04:10Z) - Broadband parametric amplification in DARTWARS [64.98268713737]
Traveling-Wave Parametric Amplifiers (TWPAs) may be especially suitable for practical applications due to their multi-Gigahertz amplification bandwidth.
The DARTWARS project aims to develop a KITWPA capable of achieving $20,$ dB of amplification.
The measurements revealed an average amplification of approximately $9,$dB across a $2,$GHz bandwidth for a KITWPA spanning $17,$mm in length.
arXiv Detail & Related papers (2024-02-19T10:57:37Z) - Demonstration of a Quantum Noise Limited Traveling-Wave Parametric
Amplifier [0.0]
Recent progress in quantum computing and the development of novel detector technologies for astrophysics is driving the need for high-gain, broadband, and quantum-limited amplifiers.
We present a purely traveling-wave parametric amplifier (TWPA) using an inverted NbTiN microstrip and amorphous Silicon dielectric.
arXiv Detail & Related papers (2023-06-19T15:45:55Z) - Progress in the development of a KITWPA for the DARTWARS project [0.0]
DARTWARS (Detector Array Readout with Traveling Wave AmplifieRS) is a three years project that aims to develop high-performing innovative Traveling Wave Parametric Amplifiers (TWPAs) for low temperature detectors and qubit readout (C-band)
This paper presents the advancements made by the DARTWARS collaboration to produce a first working prototype of a KITWPA.
arXiv Detail & Related papers (2022-08-22T07:20:55Z) - First design of a superconducting qubit for the QUB-IT experiment [50.591267188664666]
The goal of the QUB-IT project is to realize an itinerant single-photon counter exploiting Quantum Non Demolition (QND) measurements and entangled qubits.
We present the design and simulation of the first superconducting device consisting of a transmon qubit coupled to a resonator using Qiskit-Metal.
arXiv Detail & Related papers (2022-07-18T07:05:10Z) - Microwave Quantum Radar using a Josephson Traveling Wave Parametric
Amplifier [3.150310177478277]
A microwave quantum radar setup based on quantum illumination protocol and using a Josephson Traveling Wave Parametric Amplifier (JTWPA) is proposed.
Measurement results of the developed JTWPA, pumped at 12 GHz, show an ultrawide bandwidth equal to 10 GHz at X-band making our MQR a promising candidate for the detection of stealth objects.
arXiv Detail & Related papers (2021-11-05T11:30:32Z) - Detector Array Readout with Traveling Wave Amplifiers [0.0]
Noise at the quantum limit over a large bandwidth is a fundamental requirement for future applications operating at millikelvin temperatures.
The DARTWARS project has the goal of developing high-performing innovative traveling wave parametric amplifiers.
arXiv Detail & Related papers (2021-11-02T11:33:17Z) - Moving beyond the transmon: Noise-protected superconducting quantum
circuits [55.49561173538925]
superconducting circuits offer opportunities to store and process quantum information with high fidelity.
Noise-protected devices constitute a new class of qubits in which the computational states are largely decoupled from local noise channels.
This Perspective reviews the theoretical principles at the heart of these new qubits, describes recent experiments, and highlights the potential of robust encoding of quantum information in superconducting qubits.
arXiv Detail & Related papers (2021-06-18T18:00:13Z) - Entanglement generation via power-of-SWAP operations between dynamic
electron-spin qubits [62.997667081978825]
Surface acoustic waves (SAWs) can create moving quantum dots in piezoelectric materials.
We show how electron-spin qubits located on dynamic quantum dots can be entangled.
arXiv Detail & Related papers (2020-01-15T19:00:01Z)
This list is automatically generated from the titles and abstracts of the papers in this site.
This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.