A Traveling-Wave Parametric Amplifier and Converter

• URL: http://arxiv.org/abs/2406.19476v1
• Date: Thu, 27 Jun 2024 18:39:53 GMT
• Title: A Traveling-Wave Parametric Amplifier and Converter
• Authors: M. Malnou, B. T. Miller, J. A. Estrada, K. Genter, K. Cicak, J. D. Teufel, J. Aumentado, F. Lecocq,
• Abstract summary: In superconducting systems, qubits are typically measured by probing a resonator with a weak microwave tone which must be amplified before reaching the room temperature electronics. Superconducting parametric amplifiers have been widely adopted as the first amplifier in the chain, primarily because of their low noise performance, approaching the quantum limit. Here we demonstrate a parametric amplifier that achieves both broadband forward amplification and backward isolation in a single, compact, non-magnetic circuit that could be integrated on chip with superconducting qubits.
• Score: 0.0
• License: http://creativecommons.org/licenses/by/4.0/
• Abstract: High-fidelity qubit measurement is a critical element of all quantum computing architectures. In superconducting systems, qubits are typically measured by probing a readout resonator with a weak microwave tone which must be amplified before reaching the room temperature electronics. Superconducting parametric amplifiers have been widely adopted as the first amplifier in the chain, primarily because of their low noise performance, approaching the quantum limit. However, they require isolators and circulators to route signals up the measurement chain, as well as to protect qubits from amplified noise. While these commercial components are wideband and very simple to use, their intrinsic loss, size, and magnetic shielding requirements impact the overall measurement efficiency while also limiting prospects for scalable readout in large-scale superconducting quantum computers. Here we demonstrate a parametric amplifier that achieves both broadband forward amplification and backward isolation in a single, compact, non-magnetic circuit that could be integrated on chip with superconducting qubits. It relies on a nonlinear transmission line which supports traveling-wave parametric amplification of forward propagating signals, and isolation via frequency conversion of backward propagating signals. This kind of traveling-wave parametric amplifier and converter is poised to reduce the readout hardware overhead when scaling up the size of superconducting quantum computers.

Related papers

• A Traveling Wave Parametric Amplifier Isolator [0.0]
  Built-in isolation, as well as gain, would address their primary limitation: lack of true directionality. We demonstrate a Josephson-junction-based traveling-wave parametric amplifier isolator.
  arXiv  Detail & Related papers  (2024-06-28T08:51:22Z)
• Selective Single and Double-Mode Quantum Limited Amplifier [0.0]
  A quantum-limited amplifier enables the amplification of weak signals while introducing minimal noise dictated by the principles of quantum mechanics. These amplifiers serve a broad spectrum of applications in quantum computing, including fast and accurate readout of superconducting qubits and spins. We experimentally develop a novel quantum-limited amplifier based on superconducting kinetic inductance.
  arXiv  Detail & Related papers  (2023-11-20T02:37:58Z)
• An integrated microwave-to-optics interface for scalable quantum computing [47.187609203210705]
  We present a new design for an integrated transducer based on a superconducting resonator coupled to a silicon photonic cavity. We experimentally demonstrate its unique performance and potential for simultaneously realizing all of the above conditions. Our device couples directly to a 50-Ohm transmission line and can easily be scaled to a large number of transducers on a single chip.
  arXiv  Detail & Related papers  (2022-10-27T18:05:01Z)
• Broadband SNAIL parametric amplifier with microstrip impedance transformer [0.0]
  We present a quantum-limited 3-wave-mixing parametric amplifier based on superconducting nonlinear asymmetric inductive elements. operating in a current-pumped mode, we experimentally demonstrate an average gain of $17 dB$ across $300 MHz$ bandwidth. The amplifier can be fabricated using a simple technology with just a one e-beam lithography step.
  arXiv  Detail & Related papers  (2022-10-27T11:15:58Z)
• Directional Josephson traveling-wave parametric amplifier via non-Hermitian topology [58.720142291102135]
  Low-noise microwave amplification is crucial for detecting weak signals in quantum technologies and radio astronomy. Current amplifiers do not satisfy all these requirements, severely limiting the scalability of superconducting quantum devices. Here, we demonstrate the feasibility of building a near-ideal quantum amplifier using a homogeneous Josephson junction array and the non-trivial topology of its dynamics.
  arXiv  Detail & Related papers  (2022-07-27T18:07:20Z)
• First design of a superconducting qubit for the QUB-IT experiment [50.591267188664666]
  The goal of the QUB-IT project is to realize an itinerant single-photon counter exploiting Quantum Non Demolition (QND) measurements and entangled qubits. We present the design and simulation of the first superconducting device consisting of a transmon qubit coupled to a resonator using Qiskit-Metal.
  arXiv  Detail & Related papers  (2022-07-18T07:05:10Z)
• Superconducting coupler with exponentially large on-off ratio [68.8204255655161]
  Tunable two-qubit couplers offer an avenue to mitigate errors in multiqubit superconducting quantum processors. Most couplers operate in a narrow frequency band and target specific couplings, such as the spurious $ZZ$ interaction. We introduce a superconducting coupler that alleviates these limitations by suppressing all two-qubit interactions with an exponentially large on-off ratio.
  arXiv  Detail & Related papers  (2021-07-21T03:03:13Z)
• Moving beyond the transmon: Noise-protected superconducting quantum circuits [55.49561173538925]
  superconducting circuits offer opportunities to store and process quantum information with high fidelity. Noise-protected devices constitute a new class of qubits in which the computational states are largely decoupled from local noise channels. This Perspective reviews the theoretical principles at the heart of these new qubits, describes recent experiments, and highlights the potential of robust encoding of quantum information in superconducting qubits.
  arXiv  Detail & Related papers  (2021-06-18T18:00:13Z)
• Efficient and Low-Backaction Quantum Measurement Using a Chip-Scale Detector [6.986401053690062]
  Superconducting qubits are a leading platform for scalable quantum computing and quantum error correction. This work constitutes a high-quality platform for the scalable measurement of superconducting qubits.
  arXiv  Detail & Related papers  (2020-08-09T20:05:29Z)
• Waveguide Bandgap Engineering with an Array of Superconducting Qubits [101.18253437732933]
  We experimentally study a metamaterial made of eight superconducting transmon qubits with local frequency control. We observe the formation of super- and subradiant states, as well as the emergence of a polaritonic bandgap. The circuit of this work extends experiments with one and two qubits towards a full-blown quantum metamaterial.
  arXiv  Detail & Related papers  (2020-06-05T09:27:53Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.