IMU-based Real-Time Crutch Gait Phase and Step Detections in Lower-Limb Exoskeletons

• URL: http://arxiv.org/abs/2601.10832v1
• Date: Thu, 15 Jan 2026 20:07:54 GMT
• Title: IMU-based Real-Time Crutch Gait Phase and Step Detections in Lower-Limb Exoskeletons
• Abstract summary: This paper presents a minimalist framework utilizing a single, low cost Inertial-Measurement Unit (IMU) integrated into the crutch hand grip.<n>We propose a five phase classification system, including standard gait phases and a non locomotor auxiliary state, to prevent undesired motion.<n>The Temporal Convolutional Network (TCN) emerged as the superior architecture, yielding the highest success rates and lowest latency.
• Score: 4.199844472131922
• License: http://creativecommons.org/licenses/by/4.0/
• Abstract: Lower limb exoskeletons and prostheses require precise, real time gait phase and step detections to ensure synchronized motion and user safety. Conventional methods often rely on complex force sensing hardware that introduces control latency. This paper presents a minimalist framework utilizing a single, low cost Inertial-Measurement Unit (IMU) integrated into the crutch hand grip, eliminating the need for mechanical modifications. We propose a five phase classification system, including standard gait phases and a non locomotor auxiliary state, to prevent undesired motion. Three deep learning architectures were benchmarked on both a PC and an embedded system. To improve performance under data constrained conditions, models were augmented with a Finite State Machine (FSM) to enforce biomechanical consistency. The Temporal Convolutional Network (TCN) emerged as the superior architecture, yielding the highest success rates and lowest latency. Notably, the model generalized to a paralyzed user despite being trained exclusively on healthy participants. Achieving a 94% success rate in detecting crutch steps, this system provides a high performance, cost effective solution for real time exoskeleton control.

Related papers

• A Replay-Constrained Simulation Framework for Personalization of Powered Knee--Ankle Prosthesis Controllers [11.765906112645466]
  Personalization of impedance controllers for powered prosthetic legs is critical to accommodating individual gait but remains challenging.<n>MuJoCo-based simulator reproduces prosthetic knee-ankle dynamics while replaying recorded hip kinematics and feedback-based ground reaction forces.<n>Deep reinforcement learning policy personalizes phase-dependent stiffness, damping, and equilibrium angle at both joints simultaneously.
  arXiv  Detail & Related papers  (2026-07-24T18:59:48Z)
• Learning Reactive Dexterous Grasping via Hierarchical Task-Space RL Planning and Joint-Space QP Control [50.28263951510334]
  We propose a hybrid hierarchical control framework for reactive dexterous grasping.<n>The proposed framework explicitly decouples high-level spatial intent from low-level joint execution.<n>We extensively validate the proposed framework through a rigorous simulation-to-reality pipeline.
  arXiv  Detail & Related papers  (2026-05-05T04:49:38Z)
• Learning Hip Exoskeleton Control Policy via Predictive Neuromusculoskeletal Simulation [0.0]
  We present a physics-based neuromusculoskeletal learning framework that trains a hip-exoskeleton control policy entirely in simulation.<n>A reinforcement learning teacher policy is trained using a muscle-synergy action prior over a wide range of walking speeds and slopes.<n>In simulation, exoskeleton assistance reduces mean muscle activation by up to 3.4% and mean positive joint power by up to 7.0% on level ground and ramp ascent.
  arXiv  Detail & Related papers  (2026-03-04T15:23:50Z)
• Scalable Spatio-Temporal SE(3) Diffusion for Long-Horizon Protein Dynamics [51.85385061275941]
  Molecular dynamics (MD) simulations remain the gold standard for studying protein dynamics.<n>Recent generative models have shown promise in accelerating simulations, yet they struggle with long-horizon generation.<n>We present STAR-MD, a scalable diffusion model that generates physically plausible protein trajectories over micro-scale timescales.
  arXiv  Detail & Related papers  (2026-02-02T14:13:28Z)
• Neural Finite-State Machines for Surgical Phase Recognition [30.912252237906724]
  Surgical phase recognition is crucial for applications in workflow optimization, performance evaluation, and real-time intervention guidance.<n>We propose the Neural Finite-State Machine (NFSM), a novel approach that enforces temporal coherence by integrating classical state-transition priors with modern neural networks.<n>We demonstrate state-of-the-art performance across multiple benchmarks, including a significant improvement on the BernBypass70 dataset.
  arXiv  Detail & Related papers  (2024-11-27T03:21:57Z)
• REST: Efficient and Accelerated EEG Seizure Analysis through Residual State Updates [54.96885726053036]
  This paper introduces a novel graph-based residual state update mechanism (REST) for real-time EEG signal analysis. By leveraging a combination of graph neural networks and recurrent structures, REST efficiently captures both non-Euclidean geometry and temporal dependencies within EEG data. Our model demonstrates high accuracy in both seizure detection and classification tasks.
  arXiv  Detail & Related papers  (2024-06-03T16:30:19Z)
• MS-MANO: Enabling Hand Pose Tracking with Biomechanical Constraints [50.61346764110482]
  We integrate a musculoskeletal system with a learnable parametric hand model, MANO, to create MS-MANO. This model emulates the dynamics of muscles and tendons to drive the skeletal system, imposing physiologically realistic constraints on the resulting torque trajectories. We also propose a simulation-in-the-loop pose refinement framework, BioPR, that refines the initial estimated pose through a multi-layer perceptron network.
  arXiv  Detail & Related papers  (2024-04-16T02:18:18Z)
• The online learning architecture with edge computing for high-level control for assisting patients [3.1084001733555584]
  The prevalence of mobility impairments due to conditions such as spinal cord injuries, strokes, and degenerative diseases is on the rise globally. Lower-limb exoskeletons have been increasingly recognized as a viable solution for enhancing mobility and rehabilitation for individuals with such impairments. Existing exoskeleton control systems often suffer from limitations such as latency, lack of adaptability, and computational inefficiency. This paper introduces a novel online adversarial learning architecture integrated with edge computing for high-level lower-limb exoskeleton control.
  arXiv  Detail & Related papers  (2023-09-10T20:30:03Z)
• Recall-driven Precision Refinement: Unveiling Accurate Fall Detection using LSTM [0.0]
  This paper presents an innovative approach to address the pressing concern of fall incidents among the elderly by developing an accurate fall detection system. Our proposed system combines state-of-the-art technologies, including accelerometer and gyroscope sensors, with deep learning models, specifically Long Short-Term Memory (LSTM) networks. We introduce pruning techniques that strategically fine-tune the LSTM model's architecture and parameters to optimize the system's performance.
  arXiv  Detail & Related papers  (2023-09-09T20:17:39Z)
• An adaptive closed-loop ECoG decoder for long-term and stable bimanual control of an exoskeleton by a tetraplegic [91.6474995587871]
  High performance control of diverse effectors for complex tasks must be robust over time and of high decoding performance without continuous recalibration of the decoders. We developed an adaptive online tensor-based decoder: the Recursive Exponentially Weighted Markov-Switching multi- Linear Model (REW-MSLM) We demonstrated over a period of 6 months the stability of the 8-dimensional alternative bimanual control of the exoskeleton and its virtual avatar using REW-MSLM without recalibration of the decoder.
  arXiv  Detail & Related papers  (2022-01-25T16:51:29Z)
• Online Body Schema Adaptation through Cost-Sensitive Active Learning [63.84207660737483]
  The work was implemented in a simulation environment, using the 7DoF arm of the iCub robot simulator. A cost-sensitive active learning approach is used to select optimal joint configurations. The results show cost-sensitive active learning has similar accuracy to the standard active learning approach, while reducing in about half the executed movement.
  arXiv  Detail & Related papers  (2021-01-26T16:01:02Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.