CryoCMOS RF multiplexer for superconducting qubit control, readout and flux biasing at millikelvin temperatures with picowatt power consumption

• URL: http://arxiv.org/abs/2603.16608v1
• Date: Tue, 17 Mar 2026 14:49:28 GMT
• Title: CryoCMOS RF multiplexer for superconducting qubit control, readout and flux biasing at millikelvin temperatures with picowatt power consumption
• Abstract summary: Large-scale cryogenic quantum systems are constrained by an input-output bottleneck between room-temperature electronics and millikelvin stages.<n>A promising approach for scalable characterization and testing is to perform signal multiplexing directly at the qubit plane.<n>We demonstrate a cryogenic CMOS (cryoCMOS) RF multiplexer operating at 10 millikelvin with record-low static power consumption of 200 pW.
• Score: 27.308408027453012
• License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
• Abstract: Large-scale cryogenic quantum systems are constrained by an input-output bottleneck between room-temperature electronics and millikelvin stages, particularly in superconducting qubit platforms. This bottleneck is most acute for output lines, where bulky and expensive microwave components limit scalability. A promising approach for scalable characterization and testing is to perform signal multiplexing directly at the qubit plane. We demonstrate a cryogenic CMOS (cryoCMOS) RF multiplexer operating at 10 millikelvin with record-low static power consumption of 200 pW. The device provides < 2 dB insertion loss and > 30 dB isolation across DC-8 GHz. Direct connection to transmon qubits marginally affects coherence times in the range of 100 microseconds, enabling multiplexing of readout, flux and, in principle, XY drive lines. This work introduces cryoCMOS multiplexers as valuable tools for scalable, high-throughput cryogenic characterization and testing, and advances co-integrated quantum-classical control for future large-scale quantum processors.

Related papers

• Mitigating crosstalk errors for simultaneous single-qubit gates on a superconducting quantum processor [59.06950309601253]
  Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines.<n>These microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap.<n>Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates.
  arXiv  Detail & Related papers  (2026-03-11T17:47:32Z)
• Cryogenic Control and Readout Integrated Circuits for Solid-State Quantum Computing [44.99833362998488]
  cryogenic integrated circuits (ICs) have emerged as potential alternatives to room-temperature electronics. operating at cryogenic temperatures can suppress electronic noise and improve qubit control fidelity. For CMOS ICs specifically, circuit design uncertainties arise due to a lack of reliable models for cryogenic field effect transistors.
  arXiv  Detail & Related papers  (2024-10-21T11:15:45Z)
• Wideband Josephson Parametric Isolator [0.0]
  We present an alternative two-port isolating integrated circuit derived from the DC Superconducting Quantum Interference Device (DC-SQUID) Non-reciprocal transmission is achieved using the three-wave microwave mixing properties of a flux-modulated DC--SQUID.
  arXiv  Detail & Related papers  (2022-12-16T16:39:21Z)
• An integrated microwave-to-optics interface for scalable quantum computing [47.187609203210705]
  We present a new design for an integrated transducer based on a superconducting resonator coupled to a silicon photonic cavity. We experimentally demonstrate its unique performance and potential for simultaneously realizing all of the above conditions. Our device couples directly to a 50-Ohm transmission line and can easily be scaled to a large number of transducers on a single chip.
  arXiv  Detail & Related papers  (2022-10-27T18:05:01Z)
• Overcoming I/O bottleneck in superconducting quantum computing: multiplexed qubit control with ultra-low-power, base-temperature cryo-CMOS multiplexer [40.37334699475035]
  Large-scale superconducting quantum computing systems entail high-fidelity control and readout of qubits at millikelvin temperatures. Cryo-electronics may offer a scalable and versatile solution to overcome this bottleneck. Here we present an ultra-low power radio-frequency (RF) multiplexing cryo-electronics solution operating below 15 mK.
  arXiv  Detail & Related papers  (2022-09-26T22:38:09Z)
• High fidelity two-qubit gates on fluxoniums using a tunable coupler [47.187609203210705]
  Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale quantum computing. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element.
  arXiv  Detail & Related papers  (2022-03-30T13:44:52Z)
• Compact gate-based read-out of multiplexed quantum devices with a cryogenic CMOS active inductor [0.0]
  We report on a cryogenic circuit incorporating a CMOS-based active inductor. This type of circuit is especially conceived for the readout of semiconductor spin qubits.
  arXiv  Detail & Related papers  (2021-02-08T17:13:53Z)
• Millikelvin temperature cryo-CMOS multiplexer for scalable quantum device characterisation [44.07593636917153]
  Quantum computers based on solid state qubits have been a subject of rapid development in recent years. Currently, each quantum device is controlled and characterised though a dedicated signal line between room temperature and base temperature of a dilution refrigerator. This approach is not scalable and is currently limiting the development of large-scale quantum system integration and quantum device characterisation.
  arXiv  Detail & Related papers  (2020-11-23T16:22:15Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.