MM-Hand: A 21-DOF Multi-modal Modular Dexterous Robotic Hand with Remote Actuation

• URL: http://arxiv.org/abs/2604.17245v1
• Date: Sun, 19 Apr 2026 04:12:04 GMT
• Title: MM-Hand: A 21-DOF Multi-modal Modular Dexterous Robotic Hand with Remote Actuation
• Abstract summary: MM-Hand is a 21-DOF Multimodal Modular dexterous hand based on remote tendon-driven actuation.<n>The hand integrates spring-return tendon-driven fingers, modular 3D-printed finger and palm structures, quick tendon connectors for maintenance, and a multimodal sensing system.<n> MM-Hand provides a lightweight, sensor-rich, and maintainable hardware platform for dexterous manipulation research.
• Score: 25.7298718668076
• License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
• Abstract: High-DOF dexterous hands require compact actuation, rich sensing, and reliable thermal behavior, but conventional designs often occupy valuable in-hand space, increase end-effector mass, and suffer from heat accumulation near the hand. Remote tendon-driven actuation offers an alternative by relocating motors to the robot base or an external motor hub, thereby freeing the fingers and palm for additional degrees of freedom, sensing modules, and maintainable mechanical structures. This paper presents MM-Hand, a 21-DOF Multimodal Modular dexterous hand based on remote tendon-driven actuation. The hand integrates spring-return tendon-driven fingers, modular 3D-printed finger and palm structures, quick tendon connectors for maintenance, and a multimodal sensing system including joint angle sensors, tactile sensors, motor-side feedback, and in-palm stereo vision. We further analyze tendon-sheath length variation and friction loss to guide the design of the routing, motor hub, and closed-loop joint control. Experiments validate the transmission, output force, sensing, and control capability of the system. The fingertip force reaches 25N under a 1m remote sheath transmission, demonstrating practical load capacity despite long-distance tendon routing. Closed-loop joint-level experiments further evaluate command tracking with a static arm and during arm motion. These results show that MM-Hand provides a lightweight, sensor-rich, and maintainable hardware platform for dexterous manipulation research. To support the community, all hardware designs and software frameworks are made fully open-source at https://mmlab.hk/research/MM-Hand.

Related papers

• MIDAS Hand: Modular low-Impedance Direct-drive Anthropomorphic Sensing Hand [1.6170460121555008]
  MIDAS Hand is a low-cost, open-source, human-scale dexterous hand for tactile manipulation research.<n>Built from 3D-printed components, it assembles in under three hours while providing strength, repeatability, and maintainability.<n>We characterize MIDAS Hand through grasp-taxonomy analysis, payload and reliability tests, backdrivability measurements, and teleoperation demonstrations with tactile sensing.
  arXiv  Detail & Related papers  (2026-07-16T01:59:56Z)
• The N2D Haptic Glove: A Multi-Finger Glove for 2D Directional Force Feedback for Contact Rich Manipulation [11.79647885994712]
  Humans rely on directional fingertip forces to probe and regulate contact during manipulation.<n>Most wearable haptic gloves render only vibration or single-axis force, leaving force direction ambiguous.<n>We present the N2D Haptic Glove, a multi-finger wearable device that renders planar flexion-extension fingertip forces using capstan-drive transmissions for high-transparency force feedback.
  arXiv  Detail & Related papers  (2026-06-12T03:59:33Z)
• AetheRock: An Arm-Worn Robot Teaching System for Force-Guided Vision-Tactile Learning [56.20593626288444]
  AetheRock is an arm-worn device featuring a modular and easily manufactured visuo-tactile sensor, GelSlim-MiniFab, at the fingertip.<n>We propose ForceVT, a representation learning framework that uses force and vision to guide fidelity-agnostic tactile learning.
  arXiv  Detail & Related papers  (2026-06-08T17:38:57Z)
• ARISTO Hand: Sensing-Driven Distal Hyperextension for Fine-Grained Manipulation [3.3685005431669732]
  We present the ARISTO Hand, a tendon-driven robotic hand that integrates active distal hyperextension with a hybrid fingertip-sensing architecture.<n>Active hyperextension enables controlled fingertip engagement beyond the kinematic limits of standard flexion.<n>The rigid nail-mounted sensor provides reliable force measurements during edge contacts.
  arXiv  Detail & Related papers  (2026-05-28T19:44:04Z)
• SoftHand Model-W: A 3D-Printed, Anthropomorphic, Underactuated Robot Hand with Integrated Wrist and Carpal Tunnel [8.885251638603307]
  The SoftHand Model-W is a 3D-printed, under-actuated robot hand based on the Pisa/IIT SoftHand.<n>A carpal tunnel-inspired tendon routing allows remote motor placement in the forearm, reducing distal inertia.<n>The wrist enables pick-and-place operations that would be impossible otherwise.
  arXiv  Detail & Related papers  (2026-04-01T11:05:39Z)
• Feel Robot Feels: Tactile Feedback Array Glove for Dexterous Manipulation [29.061513339025026]
  We present TAG, a low-cost glove system that integrates precise hand motion capture with high-resolution tactile feedback.<n>For motion capture, TAG employs a non-contact magnetic sensing design that provides drift-free, electromagnetically robust 21-DoF joint tracking.<n>We show that TAG enables reliable real-time perception of contact geometry and dynamic force, improves success rates in contact-rich teleoperation tasks, and increases the reliability of demonstration data collection for learning-based manipulation.
  arXiv  Detail & Related papers  (2026-03-30T15:04:13Z)
• Safe Whole-Body Loco-Manipulation via Combined Model and Learning-based Control [46.47619556874003]
  We propose a whole-body controller that combines a model-based admittance control for the manipulator arm with a Reinforcement Learning policy for legged locomotion.<n>The admittance controller maps external wrenches--such as those applied by a human during physical interaction--into desired end-effector velocities, allowing for compliant behavior.<n>We validate our approach in both simulation and hardware using the Unitree Go2 quadruped robot with a 6-DoF arm and wrist-mounted 6-DoF Force/Torque sensor.
  arXiv  Detail & Related papers  (2026-03-02T22:31:12Z)
• UniForce: A Unified Latent Force Model for Robot Manipulation with Diverse Tactile Sensors [51.88112610411651]
  We propose a novel unified tactile representation learning framework that learns a shared latent force space across diverse tactile sensors.<n>UniForce reduces cross-sensor domain shift by jointly modeling inverse dynamics (image-to-force) and forward dynamics (force-to-image)<n>To avoid reliance on expensive external force/torque (F/T) sensors, we exploit static equilibrium and collect force-paired data via direct sensor--object--sensor interactions.
  arXiv  Detail & Related papers  (2026-02-01T11:03:01Z)
• Development of a 15-Degree-of-Freedom Bionic Hand with Cable-Driven Transmission and Distributed Actuation [20.94045484499254]
  This work proposes a novel 15-DoF dexterous robotic hand with detailed analysis of its mechanical architecture, electrical system, and control system.<n>The bionic hand employs a new tendon-driven mechanism, significantly reducing the number of motors required by traditional tendon-driven systems.<n>The entire system weighs only 1.4kg, combining lightweight and high-performance features.
  arXiv  Detail & Related papers  (2025-12-04T02:47:13Z)
• A High-Force Gripper with Embedded Multimodal Sensing for Powerful and Perception Driven Grasping [12.351326520775464]
  We develop a modular high grasping force gripper equipped with embedded multi-modal perception functionalities.<n>The proposed gripper can generate a grasping force of 110 N in a compact implementation.<n>The high grasping force capability is combined with embedded multi-modal sensing, which includes an eye-in-hand camera, a Time-of-Flight (ToF) distance sensor, an Inertial Measurement Unit (IMU) and an omnidirectional microphone.
  arXiv  Detail & Related papers  (2025-04-07T11:57:08Z)
• HOMIE: Humanoid Loco-Manipulation with Isomorphic Exoskeleton Cockpit [52.12750762494588]
  This paper introduces HOMIE, a semi-autonomous teleoperation system.<n>It combines a reinforcement learning policy for body control mapped to a pedal, an isomorphic exoskeleton arm for arm control, and motion-sensing gloves for hand control.<n>The system is fully open-source, demos and code can be found in our https://homietele.org/.
  arXiv  Detail & Related papers  (2025-02-18T16:33:38Z)
• Learning Visuotactile Skills with Two Multifingered Hands [80.99370364907278]
  We explore learning from human demonstrations using a bimanual system with multifingered hands and visuotactile data. Our results mark a promising step forward in bimanual multifingered manipulation from visuotactile data.
  arXiv  Detail & Related papers  (2024-04-25T17:59:41Z)
• DIGIT: A Novel Design for a Low-Cost Compact High-Resolution Tactile Sensor with Application to In-Hand Manipulation [16.54834671357377]
  General purpose in-hand manipulation remains one of the unsolved challenges of robotics. We introduce DIGIT, an inexpensive, compact, and high-resolution tactile sensor geared towards in-hand manipulation.
  arXiv  Detail & Related papers  (2020-05-29T17:07:54Z)
• OmniTact: A Multi-Directional High Resolution Touch Sensor [109.28703530853542]
  Existing tactile sensors are either flat, have small sensitive fields or only provide low-resolution signals. We introduce OmniTact, a multi-directional high-resolution tactile sensor. We evaluate the capabilities of OmniTact on a challenging robotic control task.
  arXiv  Detail & Related papers  (2020-03-16T01:31:29Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.