Related papers: Reducing two-level system dissipations in 3D superconducting Niobium resonators by atomic layer deposition and high temperature heat treatment

Reducing two-level system dissipations in 3D superconducting Niobium resonators by atomic layer deposition and high temperature heat treatment

URL: http://arxiv.org/abs/2402.04137v1
Date: Tue, 6 Feb 2024 16:40:52 GMT
Title: Reducing two-level system dissipations in 3D superconducting Niobium resonators by atomic layer deposition and high temperature heat treatment
Authors: Yasmine Kalboussi, Baptiste Delatte, Sarra Bira, Kassiog\'e Dembele, Xiaoyan Li, Frederic Miserque, Nathalie Brun, Michael Walls, Jean-luc Maurice, Diana Dragoe, Jocelyne Leroy, David Longuevergne, Aur\'elie Gentils, St\'ephanie Jublot-Leclerc, Gregoire Julien, Fabien Eozenou, Matthieu Baudrier, Luc Maurice and Thomas Proslier
Abstract summary: We demonstrate the reduction of two-level system losses in three-dimensional superconducting radio frequency (SRF) niobium resonators by atomic layer deposition (ALD) of a 10 nm aluminum oxide Al2O3 thin films. We witness a dissolution of niobium native oxides and the modification of the Al2O3-Nb interface.
Score: 4.520721347047517
License: http://creativecommons.org/licenses/by-nc-nd/4.0/
Abstract: Superconducting qubits have arisen as a leading technology platform for quantum computing which is on the verge of revolutionizing the world's calculation capacities. Nonetheless, the fabrication of computationally reliable qubit circuits requires increasing the quantum coherence lifetimes, which are predominantly limited by the dissipations of two-level system (TLS) defects present in the thin superconducting film and the adjacent dielectric regions. In this paper, we demonstrate the reduction of two-level system losses in three-dimensional superconducting radio frequency (SRF) niobium resonators by atomic layer deposition (ALD) of a 10 nm aluminum oxide Al2O3 thin films followed by a high vacuum (HV) heat treatment at 650 {\deg}C for few hours. By probing the effect of several heat treatments on Al2O3-coated niobium samples by X-ray photoelectron spectroscopy (XPS) plus scanning and conventional high resolution transmission electron microscopy (STEM/HRTEM) coupled with electron energy loss spectroscopy (EELS) and (EDX) , we witness a dissolution of niobium native oxides and the modification of the Al2O3-Nb interface, which correlates with the enhancement of the quality factor at low fields of two 1.3 GHz niobium cavities coated with 10 nm of Al2O3.

Related papers

Site-Controlled Purcell-Induced Bright Single Photon Emitters in Hexagonal Boron Nitride [62.170141783047974]
Single photon emitters hosted in hexagonal boron nitride (hBN) are essential building blocks for quantum photonic technologies that operate at room temperature. We experimentally demonstrate large-area arrays of plasmonic nanoresonators for Purcell-induced site-controlled SPEs. Our results offer arrays of bright, heterogeneously integrated quantum light sources, paving the way for robust and scalable quantum information systems.
arXiv Detail & Related papers (2024-05-03T23:02:30Z)
Characterization of process-related interfacial dielectric loss in aluminum-on-silicon by resonator microwave measurements, materials analysis, and imaging [0.0]
We investigate the influence of the fabrication process on dielectric loss in aluminum-on-silicon superconducting coplanar waveguide resonators. These devices are essential components in superconducting quantum processors. We identify the relative importance of reducing loss at the substrate-metal and the substrate-air interfaces.
arXiv Detail & Related papers (2024-03-01T18:16:28Z)
Annealing reduces Si$_3$N$_4$ microwave-frequency dielectric loss in superconducting resonators [0.0]
Microwave-frequency devices rely on silicon nitride (Si$_3$N$_4$) for sensing, signal processing, and quantum communication. We measure the cryogenic loss of either as-deposited or high-temperature stoichiometric Si$_3$N$_4$ as a function of drive strength and temperature.
arXiv Detail & Related papers (2023-12-21T00:44:46Z)
Mitigation of interfacial dielectric loss in aluminum-on-silicon superconducting qubits [0.0]
We demonstrate aluminum-on-Silicon planar transmon qubits with time-averaged energy relaxation times of up to $270,mu s$, corresponding to Q = 5 million, and a highest observed value of $501,mu s$. The mitigation of loss is achieved by reducing the presence of oxide, a known host of defects, near the substrate-metal interface.
arXiv Detail & Related papers (2023-10-10T17:08:59Z)
Argon milling induced decoherence mechanisms in superconducting quantum circuits [0.0]
We investigate the process of argon milling, a potentially coherence limiting step, using niobium and aluminum superconducting resonators as a proxy for surface-limited behavior of qubits. We find that niobium microwave resonators exhibit an order of magnitude decrease in quality-factors after surface argon milling, while aluminum resonators are resilient to the same process.
arXiv Detail & Related papers (2023-02-07T15:06:38Z)
High-efficiency microwave-optical quantum transduction based on a cavity electro-optic superconducting system with long coherence time [52.77024349608834]
Frequency conversion between microwave and optical photons is a key enabling technology to create links between superconducting quantum processors. We propose a microwave-optical platform based on long-coherence-time superconducting radio-frequency (SRF) cavities. We show that the fidelity of heralded entanglement generation between two remote quantum systems is enhanced by the low microwave losses.
arXiv Detail & Related papers (2022-06-30T17:57:37Z)
Near-monochromatic tuneable cryogenic niobium electron field emitter [48.7576911714538]
We describe electron field emission from a monocrystalline, superconducting niobium nanotip at a temperature of 5.9 K. The emitted electron energy spectrum reveals an ultra-narrow distribution down to 16 meV. This source will decrease the impact of lens aberration and enable new modes in low-energy electron microscopy, electron energy loss spectroscopy, and high-resolution vibrational spectroscopy.
arXiv Detail & Related papers (2022-05-11T20:46:21Z)
Ternary Metal Oxide Substrates for Superconducting Circuits [65.60958948226929]
Substrate material imperfections and surface losses are one of the major factors limiting superconducting quantum circuitry from reaching the scale and complexity required to build a practicable quantum computer. Here, we examine two ternary metal oxide materials, spinel (MgAl2O4) and lanthanum aluminate (LaAlO3), with a focus on surface and interface characterization and preparation.
arXiv Detail & Related papers (2022-01-17T06:10:15Z)
Hot-Band Absorption Can Mimic Entangled Two-Photon Absorption [52.77024349608834]
We investigated the fluorescence signals from Rhodamine 6G and LDS798 excited with a CW laser or an entangled photon pair source at 1060 nm. We observed a signal that originates from hot-band absorption (HBA), which is one-photon absorption from thermally-populated vibrational levels of the ground electronic state. For the typical conditions under which E2PEF measurements are performed, contributions from the HBA process could lead to a several orders-of-magnitude overestimate of the quantum advantage for excitation efficiency.
arXiv Detail & Related papers (2021-11-10T21:17:47Z)
TOF-SIMS Analysis of Decoherence Sources in Nb Superconducting Resonators [48.7576911714538]
Superconducting qubits have emerged as a potentially foundational platform technology. Material quality and interfacial structures continue to curb device performance. Two-level system defects in the thin film and adjacent regions introduce noise and dissipate electromagnetic energy.
arXiv Detail & Related papers (2021-08-30T22:22:47Z)

This list is automatically generated from the titles and abstracts of the papers in this site.