Development of High-Quality $α$-Ta Film at Room Temperature via Seed Layer Engineering

• URL: http://arxiv.org/abs/2503.16812v1
• Date: Fri, 21 Mar 2025 02:43:14 GMT
• Title: Development of High-Quality $α$-Ta Film at Room Temperature via Seed Layer Engineering
• Authors: Senthil Kumar Karuppannan, Naga Manikanta Kommanaboina, Hui Hui Kim, Nelson Lim Chee Beng, Yap Lee Koon Sherry, Yan Guangxu, Manas Mukherjee,
• Abstract summary: The growth of high-quality superconducting thin film on silicon substrates is essential for quantum computing.<n>The growth of $alpha$-Ta thin films can be achieved through high-temperature/cryogenic growth, ultra-thin seed layers, or thick films.<n>This study explores using crystalline seed layers to optimize $alpha$-Ta thin films, demonstrating improved film quality.
• Score: 0.38549690865648956
• License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
• Abstract: The growth of high-quality superconducting thin film on silicon substrates is essential for quantum computing, and low signal interconnects with industrial compatibility. Recently, the growth of $\alpha$-Ta (alpha-phase tantalum) thin films has gained attention over conventional superconductors like Nb and Al due to their high-density native oxide ($Ta_2O_5$), which offers excellent chemical resistance, superior dielectric properties, and mechanical robustness. The growth of $\alpha$-Ta thin films can be achieved through high-temperature/cryogenic growth, ultra-thin seed layers, or thick films (>300 nm). While high-temperature deposition produces high-quality films, it can cause thermal stress, silicide formation at the interface, and defects due to substrate-film mismatch. Room-temperature deposition minimizes these issues, benefiting heat-sensitive substrates and device fabrication. Low-temperature growth using amorphous (defective) seed layers such as TaN and TiN has shown promise for phase stabilization. However, nitrogen gas, used as a source of metallic nitride, can introduce defects and lead to the formation of amorphous seed layers. This study explores using crystalline seed layers to optimize $\alpha$-Ta thin films, demonstrating improved film quality, including reduced surface roughness, enhanced phase orientation, and higher transition temperatures compared to amorphous seed layers like metal nitrides. These advancements could interest the superconducting materials community for fabricating high-quality quantum devices.

Related papers

• Tantalum thin films sputtered on silicon and on different seed layers: material characterization and coplanar waveguide resonator performance [1.927480729357611]
  Superconducting qubits are a promising platform for large-scale quantum computing. In the past, most qubit architectures have relied on niobium (Nb) as the material of choice for the superconducting layer. One such material is tantalum (Ta), for which high-performance qubit components have already been demonstrated.
  arXiv  Detail & Related papers  (2024-09-09T20:03:10Z)
• Single photon emitters in monolayer semiconductors coupled to transition metal dichalcogenide nanoantennas on silica and gold substrates [49.87501877273686]
  Transition metal dichalcogenide (TMD) single photon emitters offer numerous advantages to quantum information applications. Traditional materials used for the fabrication of nanoresonators, such as silicon or gallium phosphide (GaP), often require a high refractive index substrate. Here, we use nanoantennas (NAs) fabricated from multilayer TMDs, which allow complete flexibility with the choice of substrate.
  arXiv  Detail & Related papers  (2024-08-02T07:44:29Z)
• Nanocavity-mediated Purcell enhancement of Er in TiO$_2$ thin films grown via atomic layer deposition [0.9822586588159397]
  Trivalent erbium (Er$3+$) embedded as an atomic defect in the solid-state shows promise as a spin-based quantum memory for quantum communication. We present Er-doped titanium dioxide thin film growth on silicon substrates using a foundry-scalable atomic layer deposition process. Our findings demonstrate a low-temperature, non-destructive, and substrate-independent process for integrating Er-doped materials with silicon photonics.
  arXiv  Detail & Related papers  (2023-09-23T22:41:56Z)
• Microwave-based quantum control and coherence protection of tin-vacancy spin qubits in a strain-tuned diamond membrane heterostructure [54.501132156894435]
  Tin-vacancy center (SnV) in diamond is a promising spin-photon interface with desirable optical and spin properties at 1.7 K. We introduce a new platform that overcomes these challenges - SnV centers in uniformly strained thin diamond membranes. The presence of crystal strain suppresses temperature dependent dephasing processes, leading to a considerable improvement of the coherence time up to 223 $mu$s at 4 K.
  arXiv  Detail & Related papers  (2023-07-21T21:40:21Z)
• Microwave characterization of tantalum superconducting resonators on silicon substrate with niobium buffer layer [0.0]
  Tantalum thin films sputtered on unheated silicon substrates are characterized with microwaves at around 10 GHz. Coplanar waveguide resonators based on the composite film exhibit significantly enhanced internal quality factors.
  arXiv  Detail & Related papers  (2023-06-27T07:35:13Z)
• Optimizing the growth conditions of Al mirrors for superconducting nanowire single-photon detectors [0.0]
  We investigate the growth conditions for thin (less than 200 nm) sputtered aluminum (Al) films. We tune various sputtering parameters such as the deposition rate, temperature, and power. We confirm the high quality of the deposited films by realizing superconducting single-photon detectors integrated into multi-layer heterostructures.
  arXiv  Detail & Related papers  (2023-05-29T09:39:24Z)
• High-quality superconducting α-Ta film sputtered on heated silicon substrate [0.0]
  alpha-Ta film is a promising platform for fabricating multi-qubits with long coherence time. Here we report the alpha-Ta film sputter-grown on Si (100) with a low-loss superconducting TiNx buffer layer. The superconducting critical transition temperature (Tc) and residual resistivity ratio (RRR) in the alpha-Ta film grown at 500 degC are higher than that in the alpha-Ta film grown at room temperature (RT)
  arXiv  Detail & Related papers  (2023-05-18T13:25:11Z)
• Phononically shielded photonic-crystal mirror membranes for cavity quantum optomechanics [48.7576911714538]
  We present a highly reflective, sub-wavelength-thick membrane resonator featuring high mechanical quality factor. We construct a Fabry-Perot-type optical cavity, with the membrane forming one terminating mirror. We demonstrate optomechanical sideband cooling to mK-mode temperatures, starting from room temperature.
  arXiv  Detail & Related papers  (2022-12-23T04:53:04Z)
• Van der Waals Materials for Applications in Nanophotonics [49.66467977110429]
  We present an emerging class of layered van der Waals (vdW) crystals as a viable nanophotonics platform. We extract the dielectric response of 11 mechanically exfoliated thin-film (20-200 nm) van der Waals crystals, revealing high refractive indices up to n = 5. We fabricate nanoantennas on SiO$$ and gold utilizing the compatibility of vdW thin films with a variety of substrates.
  arXiv  Detail & Related papers  (2022-08-12T12:57:14Z)
• Ternary Metal Oxide Substrates for Superconducting Circuits [65.60958948226929]
  Substrate material imperfections and surface losses are one of the major factors limiting superconducting quantum circuitry from reaching the scale and complexity required to build a practicable quantum computer. Here, we examine two ternary metal oxide materials, spinel (MgAl2O4) and lanthanum aluminate (LaAlO3), with a focus on surface and interface characterization and preparation.
  arXiv  Detail & Related papers  (2022-01-17T06:10:15Z)
• TOF-SIMS Analysis of Decoherence Sources in Nb Superconducting Resonators [48.7576911714538]
  Superconducting qubits have emerged as a potentially foundational platform technology. Material quality and interfacial structures continue to curb device performance. Two-level system defects in the thin film and adjacent regions introduce noise and dissipate electromagnetic energy.
  arXiv  Detail & Related papers  (2021-08-30T22:22:47Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.