Untethered thin dielectric elastomer actuated soft robot

• URL: http://arxiv.org/abs/2512.17940v1
• Date: Fri, 12 Dec 2025 14:57:08 GMT
• Title: Untethered thin dielectric elastomer actuated soft robot
• Abstract summary: This study presents an untethered thin soft robot powered by thin dielectric elastomer actuators.<n>The robot measures 38 mm in length, 6 mm in height, and weighs just 2.34 grams.<n>The untethered configuration achieves a locomotion speed of 0.5 mm/s, making it highly suitable for navigating confined and complex environments.
• Score: 11.323571668177694
• License: http://creativecommons.org/licenses/by-nc-nd/4.0/
• Abstract: Thin dielectric elastomer actuator (DEA) features a unique in-plane configuration, enabling low-profile designs capable of accessing millimetre-scale narrow spaces. However, most existing DEA-powered soft robots require high voltages and wired power connections, limiting their ability to operate in confined environments. This study presents an untethered thin soft robot (UTS-Robot) powered by thin dielectric elastomer actuators (TS-DEA). The robot measures 38 mm in length, 6 mm in height, and weighs just 2.34 grams, integrating flexible onboard electronics to achieve fully untethered actuation. The TS-DEA, operating at resonant frequencies of 86 Hz under a low driving voltage of 220 V, adopts a dual-actuation sandwiched structure, comprising four dielectric elastomer layers bonded to a compressible tensioning mechanism at its core. This design enables high power density actuation and locomotion via three directional friction pads. The low-voltage actuation is achieved by fabricating each elastomer layer via spin coating to an initial thickness of 50 um, followed by biaxial stretching to 8 um. A comprehensive design and modelling framework has been developed to optimise TS-DEA performance. Experimental evaluations demonstrate that the bare TS-DEA achieves a locomotion speed of 12.36 mm/s at resonance, the untethered configuration achieves a locomotion speed of 0.5 mm/s, making it highly suitable for navigating confined and complex environments.

Related papers

• High-Degree-of-Freedom Lightweight Bioinspired Leg for Enhanced Mobility in Small Robots [17.598929136658494]
  This paper presents a novel micro-scale parallel leg mechanism with four degrees of freedom.<n>The design incorporates two spherical five-bar linkages to achieve spatial motion within a parallel four-bar configuration.<n>The total mass of the system is only 18.9 g, with an end-effector output force of approximately 0.5 N and a workspace exceeding 22255 mm3.
  arXiv  Detail & Related papers  (2026-06-17T04:39:40Z)
• Friction Characterization of a Cable-Driven Differential Actuation System for Lower-Limb Exoskeletons [42.628421392139]
  Lower-limb exoskeletons require actuation systems that can provide accurate joint torque control.<n> Conventional architectures often rely on independently actuated joints and joint-level torque sensors.<n>This paper presents a novel differential actuation architecture for hip-knee flexion/extension.
  arXiv  Detail & Related papers  (2026-06-14T19:47:32Z)
• High-Load-Density Electro-Permanent Magnetic Foot with Controllable Adhesion for Quadruped Wall-Climbing Robots [12.082637653919194]
  This paper presents a high-load-density electro-permanent magnetic foot with controllable adhesion.<n>The proposed CHN-EPM generates a maximum adhesion force exceeding 1000 N with a load-to-weight ratio over 200:1.<n>The system is integrated into a commercial quadruped robot (Unitree GO2), demonstrating high-load adhesion on ceiling and vertical-wall surfaces.
  arXiv  Detail & Related papers  (2026-05-29T05:13:05Z)
• Muscle-inspired magnetic actuators that push, pull, crawl, and grasp [0.1957338076370071]
  Functional magnetic composites capable of large deformation, load bearing, and multifunctional motion are essential for next-generation adaptive soft robots.<n>We present muscle-inspired magnetic actuators (MMA), additively manufactured from a thermoplastic/permanent magnet polyurethane/Nd2Fe14B composite.
  arXiv  Detail & Related papers  (2026-04-20T11:05:27Z)
• ZipFold: Modular Actuators for Scaleable Adaptive Robots [52.52738470247707]
  This paper introduces a compact, easy-to-fabricate deployable actuator that achieves reversible scale and stiffness transformations.<n>The simple actuation method allows for smooth, continuous transitions between compact (flexible) and expanded (quasi-rigid) states.
  arXiv  Detail & Related papers  (2026-04-06T23:50:03Z)
• Off-Axis Compliant RCM Joint with Near-Isotropic Stiffness and Minimal Parasitic Error [5.683284334858979]
  This paper presents an off-axis, monolithic compliant Remote Center of Motion (RCM) joint for neuroendoscopic manipulation.<n>The end-effector is placed outside the tetrahedral flexure to improve line of sight, facilitate sterilization, and allow rapid tool release.
  arXiv  Detail & Related papers  (2026-03-30T09:59:18Z)
• MI-DETR: A Strong Baseline for Moving Infrared Small Target Detection with Bio-Inspired Motion Integration [63.87179575890912]
  We propose Motion Integration DETR (MI-DETR), a bio-inspired dual-pathway detector for infrared small target detection.<n>First, a retina-inspired cellular automaton (RCA) converts raw frame sequences into a motion map defined on the same pixel grid as the appearance image.<n>Second, a Parvocellular-Magnocellular Interconnection (PMI) Block facilitates bidirectional feature interaction between the two pathways.
  arXiv  Detail & Related papers  (2026-03-05T11:39:31Z)
• A Soft Robotic Demonstration in the Stratosphere [62.91681227094761]
  Soft robots offer advantages in adaptability, but most lack resilience to the pressure and temperature extremes found as close as the Stratosphere.<n>We present a crosslinking mechanism for silicone elastomers under ultraviolet light using trimethyl(methylcyclopentadienyl)platinum(IV) as a catalyst.<n>The material resilience advantage is demonstrated in controlled experiments at -40 and 120 C, as well as near vacuum, in comparison with state-of-the-art acrylic and silicone chemistries.
  arXiv  Detail & Related papers  (2026-03-04T18:19:07Z)
• Geometry-based pneumatic actuators for soft robotics [3.516880783923843]
  We present geometry-based pneumatic actuators (GPAs), a design and implementation approach that introduces constraint layers with CNC heat-sealed chambers.<n>The approach achieves predictable deformation, near-zero bending radii, multi-states actuation, and enables customizable and repeatable complex actuated geometries.<n>We demonstrate versatility of the GPAs approach through three applications: a 49 g wrist exoskeleton reducing muscle activity by up to 51%, a 30.8 g haptic interface delivering 8 N force feedback with fast response, and a 208 g bipedal robot achieving multi-gait locomotion.
  arXiv  Detail & Related papers  (2026-02-27T15:43:22Z)
• A Robotic Testing Platform for Pipelined Discovery of Resilient Soft Actuators [63.07587517846448]
  We propose an optimization pipeline enabled by a novel testing robot capable of scanning DEA lifetime.<n>The robot integrates electro-mechanical property measurement, programmable voltage input, and multi-channel testing capacity.<n>Using it, we scanned the lifetime of Elastosil-based linear actuators across parameters including input voltage magnitude, frequency, electrode material concentration, and electrical connection filler.
  arXiv  Detail & Related papers  (2026-02-24T14:41:28Z)
• Snapping Actuators with Asymmetric and Sequenced Motion [6.7646973106436254]
  A compact quadrupedal robot achieves coordinated wavelike locomotion using only a single pressure input.<n>The robot exhibits frequency-dependent performance with a maximum speed of 72.78mm/s at 7.5Hz.
  arXiv  Detail & Related papers  (2026-02-20T18:45:17Z)
• Tendon-Driven Reciprocating and Non-Reciprocating Motion via Snapping Metabeams [0.0]
  A tendon-driven mechanism consisting of spiral-based metabeams was developed for producing both reciprocating and non-reciprocating motion.<n>The spiral geometry allows large reversible deformation even when made from a relatively stiff material such as PLA.<n>The developed mechanism was further integrated into a swimming robot, where tendon-driven fins exhibited two distinct actuation modes.
  arXiv  Detail & Related papers  (2026-02-20T16:35:51Z)
• Dynamic Modeling and MPC for Locomotion of Tendon-Driven Soft Quadruped [0.0]
  SLOT (Soft Legged Omnidirectional Tetrapod) is a tendon-driven soft quadruped robot with 3D-printed TPU legs.<n>Each leg is modeled as a deformable continuum using discrete Cosserat rod theory.<n>A modular whole-body modeling framework is introduced, in which compliant leg dynamics are represented.
  arXiv  Detail & Related papers  (2026-02-18T11:14:22Z)
• Moire-Engineered Ferroelectric Transistors for Nearly Trap-free, Low-Power and Non-Volatile 2D Electronics [2.200824545283625]
  We demonstrate a moire-engineered ferroelectric field-effect transistor (FeFET) utilizing twisted WSe2 bilayers.<n>The device exhibits a stable non-volatile memory window of 0.10 V and high mobility.<n>Results establish moire-engineered ferroelectricity as a practical and scalable route toward ultraclean, low-power, and non-volatile 2D electronics.
  arXiv  Detail & Related papers  (2025-12-08T22:40:30Z)
• In-situ-tunable spin-spin interactions in a Penning trap with in-bore optomechanics [41.94295877935867]
  We present an optomechanical system for in-situ tuning of the coherent spin-motion and spin-spin interaction strength. We characterize the system using measurements of the induced mean-field spin precession. These experiments show approximately a $times2$ variation in the ratio of the coherent to incoherent interaction strength.
  arXiv  Detail & Related papers  (2024-01-31T11:00:39Z)
• Direct laser-written optomechanical membranes in fiber Fabry-Perot cavities [41.94295877935867]
  We demonstrate a cavity optomechanical experiment using 3D-laser-written polymer membranes inside fiber Fabry-Perot cavities. We observe optomechanical spring tuning of the mechanical resonator by tens of kHz exceeding its linewidth at cryogenic temperatures.
  arXiv  Detail & Related papers  (2022-12-27T16:02:03Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.