Fast Data-Driven Modeling of Hydraulic Clutch Control Pressure with Latch-State Classification and Gaussian Process Regression
- URL: http://arxiv.org/abs/2607.10477v1
- Date: Sat, 11 Jul 2026 21:07:02 GMT
- Title: Fast Data-Driven Modeling of Hydraulic Clutch Control Pressure with Latch-State Classification and Gaussian Process Regression
- Abstract summary: This paper presents a data-driven method for modeling the pressure response of a hydraulic clutch control circuit.<n>The proposed approach was evaluated on unseen ramp-rate data and compared against a physics-based Amesim model.
- Score: 0.0
- License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
- Abstract: This paper presents a data-driven method for modeling the pressure response of a hydraulic clutch control circuit. The system consists of a variable-force solenoid, accumulator, pressure regulator valve, and latch valve, and exhibits nonlinear behavior caused by hysteresis, latch transitions, and actuator dynamics. A baseline model using commanded current variables captured the general pressure response but failed to represent hysteresis and latch behavior accurately. The input vector was therefore extended with current derivative information, and several classifiers were tested to separate latch-related operating regimes before fitting Gaussian Process regression models to the resulting partitions. Nonlinear SVC and gradient boosting produced the highest latch-classification accuracy, and nonlinear SVC was selected for the final local-regression pipeline. The proposed approach was evaluated on unseen ramp-rate data and compared against a physics-based Amesim model. The machine-learning model reproduced the measured pressure response and hysteresis behavior more accurately than the physics-based simulation for the tested operating conditions. These results suggest that machine-learning plant models can complement physics-based hydraulic models during hardware development and controller calibration when representative test-stand data are available.
Related papers
- Rapid FinFET Modelling Using an Autoencoder [0.0]
We train an autoencoder that compresses full I-V curves into a low-dimensional latent space.<n>A key innovation is the explicit incorporation of parameter such as drain to source voltage (VDS) as an input feature.<n>The trained model successfully reconstructs full I-V curves and directly extracts critical device metrics.
arXiv Detail & Related papers (2026-06-23T01:15:50Z) - Regularized Machine Learning for System Identification of Ship Free-Running Manoeuvres from CFD-Based Synthetic Data: A Comparative Study [0.0]
This study investigates supervised machine learning techniques for identifying ship hydrodynamic coefficients from CFD-generated data.<n>Training and validation datasets are derived from URANS simulations of zig-zag and turning circle manoeuvres.<n>Regularized regression techniques effectively mitigate multicollinearity and notably enhance prediction accuracy.
arXiv Detail & Related papers (2026-06-15T12:42:29Z) - Learning and Adaptation in Wire Arc Additive Manufacturing Bead Geometry Control [0.34376560669160394]
We show that a simple recurrent neural network architecture and one-step-ahead predictive control can improve the process performance.<n>Experiments on a robotic WAAM testbed with integrated line-scanner feedback significant improvements in height and width consistency.
arXiv Detail & Related papers (2026-05-27T22:15:24Z) - Fractional-order Modeling for Nonlinear Soft Actuators via Particle Swarm Optimization [49.34452620841728]
This paper proposes an innovative modeling framework based on fractional-order differential equations (FODEs) to capture the dynamic behavior of soft materials.<n>The proposed approach effectively represents the complex deformation phenomena inherent in soft actuators.
arXiv Detail & Related papers (2025-12-20T04:46:25Z) - Efficient dynamic modal load reconstruction using physics-informed Gaussian processes based on frequency-sparse Fourier basis functions [0.0]
This paper presents an efficient dynamic load reconstruction method using physics-informed Gaussian processes (GP)<n>The GP's covariance matrices are built using the description of the system dynamics, and the model is trained using structural response measurements.<n>The developed model holds potential for applications in structural health monitoring, damage prognosis, and load model validation.
arXiv Detail & Related papers (2025-03-12T14:16:27Z) - Event-Based Simulation of Stochastic Memristive Devices for Neuromorphic Computing [41.66366715982197]
We build a general model of memristors suitable for the simulation of event-based systems.
We extend an existing general model of memristors to an event-driven setting.
We demonstrate an approach for fitting the parameters of the event-based model to the drift model.
arXiv Detail & Related papers (2024-06-14T13:17:19Z) - Graph Neural Networks for Pressure Estimation in Water Distribution
Systems [44.99833362998488]
Pressure and flow estimation in Water Distribution Networks (WDN) allows water management companies to optimize their control operations.
We combine physics-based modeling and Graph Neural Networks (GNN), a data-driven approach, to address the pressure estimation problem.
Our GNN-based model estimates the pressure of a large-scale WDN in The Netherlands with a MAE of 1.94mH$$O and a MAPE of 7%.
arXiv Detail & Related papers (2023-11-17T15:30:12Z) - Kalman Filter for Online Classification of Non-Stationary Data [101.26838049872651]
In Online Continual Learning (OCL) a learning system receives a stream of data and sequentially performs prediction and training steps.
We introduce a probabilistic Bayesian online learning model by using a neural representation and a state space model over the linear predictor weights.
In experiments in multi-class classification we demonstrate the predictive ability of the model and its flexibility to capture non-stationarity.
arXiv Detail & Related papers (2023-06-14T11:41:42Z) - Discovery of sparse hysteresis models for piezoelectric materials [1.3669389861593737]
This article presents an approach for modelling in piezoelectric materials using sparse-regression techniques.
The presented approach is compared to traditional regression-based and neural network methods, demonstrating its efficiency and robustness.
arXiv Detail & Related papers (2023-02-10T15:21:36Z) - Physics-informed machine learning with differentiable programming for
heterogeneous underground reservoir pressure management [64.17887333976593]
Avoiding over-pressurization in subsurface reservoirs is critical for applications like CO2 sequestration and wastewater injection.
Managing the pressures by controlling injection/extraction are challenging because of complex heterogeneity in the subsurface.
We use differentiable programming with a full-physics model and machine learning to determine the fluid extraction rates that prevent over-pressurization.
arXiv Detail & Related papers (2022-06-21T20:38:13Z) - Physics-Inspired Temporal Learning of Quadrotor Dynamics for Accurate
Model Predictive Trajectory Tracking [76.27433308688592]
Accurately modeling quadrotor's system dynamics is critical for guaranteeing agile, safe, and stable navigation.
We present a novel Physics-Inspired Temporal Convolutional Network (PI-TCN) approach to learning quadrotor's system dynamics purely from robot experience.
Our approach combines the expressive power of sparse temporal convolutions and dense feed-forward connections to make accurate system predictions.
arXiv Detail & Related papers (2022-06-07T13:51:35Z) - Using Data Assimilation to Train a Hybrid Forecast System that Combines
Machine-Learning and Knowledge-Based Components [52.77024349608834]
We consider the problem of data-assisted forecasting of chaotic dynamical systems when the available data is noisy partial measurements.
We show that by using partial measurements of the state of the dynamical system, we can train a machine learning model to improve predictions made by an imperfect knowledge-based model.
arXiv Detail & Related papers (2021-02-15T19:56:48Z)
This list is automatically generated from the titles and abstracts of the papers in this site.
This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.