Characterizing and Mitigating Flux Crosstalk in Superconducting Qubits-Couplers System

• URL: http://arxiv.org/abs/2508.03434v1
• Date: Tue, 05 Aug 2025 13:22:57 GMT
• Title: Characterizing and Mitigating Flux Crosstalk in Superconducting Qubits-Couplers System
• Authors: Chen-Hsun Ma, Myrron Albert Callera Aguila, Nien-Yu Li, Li-Chieh Hsiao, Yi-Shiang Huang, Yen-Chun Chen, Teik-Hui Lee, Chin-Chia Chang, Jyh-Yang Wang, Ssu-Yen Huang, Hsi-Sheng Goan, Chiao-Hsuan Wang, Cen-Shawn Wu, Chii-Dong Chen, Chung-Ting Ke,
• Abstract summary: Superconducting qubits have achieved exceptional gate fidelities, exceeding the error-correction threshold in recent years.<n>One key ingredient of such improvement is the introduction of tunable couplers to control the qubit-to-qubit coupling through frequency tuning.<n>Moving toward fault-tolerant quantum computation, increasing the number of physical qubits is another step toward effective error correction codes.
• Score: 2.7561068251838714
• License: http://creativecommons.org/licenses/by-nc-sa/4.0/
• Abstract: Superconducting qubits have achieved exceptional gate fidelities, exceeding the error-correction threshold in recent years. One key ingredient of such improvement is the introduction of tunable couplers to control the qubit-to-qubit coupling through frequency tuning. Moving toward fault-tolerant quantum computation, increasing the number of physical qubits is another step toward effective error correction codes. Under a multiqubit architecture, flux control (Z) lines are crucial in tuning the frequency of the qubits and couplers. However, dense flux lines result in magnetic flux crosstalk, wherein magnetic flux applied to one element inadvertently affects neighboring qubits or couplers. This crosstalk obscures the idle frequency of the qubit when flux bias is applied, which degrades gate performance and calibration accuracy. In this study, we characterize flux crosstalk and suppress it in a multiqubit-coupler chip with multi-Z lines without adding additional readout for couplers. By quantifying the mutual flux-induced frequency shifts of qubits and couplers, we construct a cancellation matrix that enables precise compensation of non-local flux, demonstrating a substantial reduction in Z-line crosstalk from 56.5$\,$permille$\,$to 0.13$\,$permille$\,$ which is close to statistical error. Flux compensation corrects the CZ SWAP measurement, leading to a symmetric map with respect to flux bias. Compared with a crosstalk-free calculated CZ SWAP map, the measured map indicates that our approach provides a near-zero crosstalk for the coupler-transmon system. These results highlight the effectiveness of our approach in enhancing flux crosstalk-free control and supporting its potential for scaling superconducting quantum processors.

Related papers

• Realization of two-qubit gates and multi-body entanglement states in an asymmetric superconducting circuits [3.9488862168263412]
  We propose a tunable fluxonium-transmon-transmon (FTT) cou pling scheme. The asymmetric structure composed of fluxonium and transmon will optimize the frequency space and form a high fidelity two-qubit quantum gate. We study the performance of this scheme by simulating the general single-qubit Xpi/2 gate and two-qubit (iSWAP) gate.
  arXiv  Detail & Related papers  (2024-04-12T08:44:21Z)
• Fault-tolerant quantum architectures based on erasure qubits [49.227671756557946]
  We exploit the idea of erasure qubits, relying on an efficient conversion of the dominant noise into erasures at known locations. We propose and optimize QEC schemes based on erasure qubits and the recently-introduced Floquet codes. Our results demonstrate that, despite being slightly more complex, QEC schemes based on erasure qubits can significantly outperform standard approaches.
  arXiv  Detail & Related papers  (2023-12-21T17:40:18Z)
• Fast ZZ-Free Entangling Gates for Superconducting Qubits Assisted by a Driven Resonator [42.152052307404]
  We propose a simple scheme to cancel stray interactions between qubits. We numerically show that such a scheme can enable short and high-fidelity entangling gates. Our architecture is not only ZZ free but also contains no extra noisy components.
  arXiv  Detail & Related papers  (2023-11-02T15:42:02Z)
• Fast Flux-Activated Leakage Reduction for Superconducting Quantum Circuits [84.60542868688235]
  leakage out of the computational subspace arising from the multi-level structure of qubit implementations. We present a resource-efficient universal leakage reduction unit for superconducting qubits using parametric flux modulation. We demonstrate that using the leakage reduction unit in repeated weight-two stabilizer measurements reduces the total number of detected errors in a scalable fashion.
  arXiv  Detail & Related papers  (2023-09-13T16:21:32Z)
• Enhancing Dispersive Readout of Superconducting Qubits Through Dynamic Control of the Dispersive Shift: Experiment and Theory [47.00474212574662]
  A superconducting qubit is coupled to a large-bandwidth readout resonator. We show a beyond-state-of-the-art two-state-readout error of only 0.25,%$ in 100 ns integration time. The presented results are expected to further boost the performance of new and existing algorithms and protocols.
  arXiv  Detail & Related papers  (2023-07-15T10:30:10Z)
• Qubit readouts enabled by qubit cloaking [49.1574468325115]
  Time-dependent drives play a crucial role in quantum computing efforts. They enable single-qubit control, entangling logical operations, as well as qubit readout. Qubit cloaking was introduced in Lled'o, Dassonneville, et al.
  arXiv  Detail & Related papers  (2023-05-01T15:58:25Z)
• Learning-based Calibration of Flux Crosstalk in Transmon Qubit Arrays [0.1950600573389501]
  Superconducting quantum processors comprising flux-tunable data and coupler qubits are a promising platform for quantum computation. Magnetic flux crosstalk between the flux-control lines and the constituent qubits impedes precision control of qubit frequencies. We introduce a learning-based calibration protocol and demonstrate its experimental performance by calibrating an array of 16 flux-tunable transmon qubits.
  arXiv  Detail & Related papers  (2023-03-06T18:34:58Z)
• Coupler microwave-activated controlled phase gate on fluxonium qubits [32.73124984242397]
  A tunable coupler typically includes a nonlinear element, such as a SQUID, which is used to tune the resonance frequency of an LC circuit connecting two qubits. Here we propose a complimentary approach where instead of tuning the resonance frequency of the tunable coupler by applying a quasistatic control signal, we excite by microwave the degree of freedom associated with the coupler itself.
  arXiv  Detail & Related papers  (2023-02-20T07:51:04Z)
• Cancelling microwave crosstalk with fixed-frequency qubits [6.661976511211463]
  We propose and demonstrate a method based on AC Stark effect for calibrating the microwave signal crosstalk. The optimal compensation parameters can be reliably identified from a well-defined interference pattern. We implement the method on an array of 7 superconducting qubits, and show its effectiveness in removing the majority of crosstalk errors.
  arXiv  Detail & Related papers  (2022-04-06T17:26:47Z)
• High fidelity two-qubit gates on fluxoniums using a tunable coupler [47.187609203210705]
  Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale quantum computing. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element.
  arXiv  Detail & Related papers  (2022-03-30T13:44:52Z)
• Superconducting coupler with exponentially large on-off ratio [68.8204255655161]
  Tunable two-qubit couplers offer an avenue to mitigate errors in multiqubit superconducting quantum processors. Most couplers operate in a narrow frequency band and target specific couplings, such as the spurious $ZZ$ interaction. We introduce a superconducting coupler that alleviates these limitations by suppressing all two-qubit interactions with an exponentially large on-off ratio.
  arXiv  Detail & Related papers  (2021-07-21T03:03:13Z)
• Fault-tolerant parity readout on a shuttling-based trapped-ion quantum computer [64.47265213752996]
  We experimentally demonstrate a fault-tolerant weight-4 parity check measurement scheme. We achieve a flag-conditioned parity measurement single-shot fidelity of 93.2(2)%. The scheme is an essential building block in a broad class of stabilizer quantum error correction protocols.
  arXiv  Detail & Related papers  (2021-07-13T20:08:04Z)
• Calibration of flux crosstalk in large-scale flux-tunable superconducting quantum circuits [0.0]
  Calibrating flux crosstalk is a challenging task when the circuit elements interact strongly. We present a novel approach to flux crosstalk calibration, which is circuit model independent and relies on an iterative process to gradually improve calibration accuracy.
  arXiv  Detail & Related papers  (2021-05-29T19:28:17Z)
• Hardware-Efficient Microwave-Activated Tunable Coupling Between Superconducting Qubits [0.0]
  We realize a tunable $ZZ$ interaction between two transmon qubits with fixed frequencies and fixed coupling. Because both transmons are driven, it is resilient to microwave crosstalk. We apply this interaction to implement a controlled phase (CZ) gate with a gate fidelity of $99.43(1)%$ as measured by cycle benchmarking.
  arXiv  Detail & Related papers  (2021-05-12T01:06:08Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.