Efficient flip-chip and on-chip-based modulation of flux-tunable superconducting resonators
- URL: http://arxiv.org/abs/2512.23119v1
- Date: Sun, 28 Dec 2025 23:47:47 GMT
- Title: Efficient flip-chip and on-chip-based modulation of flux-tunable superconducting resonators
- Authors: Achintya Paradkar, Paul Nicaise, Karim Dakroury, Fabian Resare, Christian Dejaco, Lukas Deeg, Gerhard Kirchmair, Witlef Wieczorek,
- Abstract summary: We demonstrate the efficient modulation of flux-tunable superconducting resonators (FTRs) using flip-chip or on-chip-based input coils.<n>We employ SQUIDs with a geometric loop inductance of up to 0.7nH to increase the flux transfer efficiency.
- Score: 0.0
- License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
- Abstract: We demonstrate the efficient modulation of flux-tunable superconducting resonators (FTRs) using flip-chip or on-chip-based input coils. The FTRs we use are aluminum-based quarter-wave coplanar waveguide resonators terminated with 100um or 200um-wide square loop dc superconducting quantum interference devices (SQUIDs) employing 1um-sized Josephson junctions. We employ SQUIDs with a geometric loop inductance of up to 0.7nH to increase the flux transfer efficiency. The geometric inductance of the SQUID results in a non-zero screening parameter $β_L$, whose branch switching effect is mitigated by using asymmetric junctions. We achieve flux modulation of the FTRs by more than one GHz and flux responsivities of up to tens of GHz/$Φ_0$ with uA-scale on-chip currents. We compare flip-chip with on-chip input-coil-based flux modulation, where the former is realized through galvanically connected and closely spaced chips, while the latter is achieved through superconducting air-bridge connections. We achieve a flux-transfer efficiency from the input coil to the SQUID loop of up to 20%. Our work paves the way for efficient low current flux modulation of FTRs and sensitive measurement of flux signals.
Related papers
- Niobium Air Bridges as a Low-Loss Component for Superconducting Quantum Hardware [0.0]
Scaling up superconducting quantum processors requires a high routing density for readout and control lines.<n>We propose and demonstrate a universal subtractive fabrication process for air bridges based on an aluminum hard mask and niobium as the superconducting film.<n>We fabricate superconducting CPW resonators incorporating multiple niobium air bridges in and across their center conductors.
arXiv Detail & Related papers (2025-03-15T10:36:00Z) - Realization of two-qubit gates and multi-body entanglement states in an asymmetric superconducting circuits [3.9488862168263412]
We propose a tunable fluxonium-transmon-transmon (FTT) cou pling scheme.
The asymmetric structure composed of fluxonium and transmon will optimize the frequency space and form a high fidelity two-qubit quantum gate.
We study the performance of this scheme by simulating the general single-qubit Xpi/2 gate and two-qubit (iSWAP) gate.
arXiv Detail & Related papers (2024-04-12T08:44:21Z) - Low-loss Millimeter-wave Resonators with an Improved Coupling Structure [39.76747788992184]
Millimeter-wave superconducting resonators are a useful tool for studying quantum device coherence in a new frequency domain.
We develop and characterize a tapered transition structure coupling a rectangular waveguide to a planar slotline waveguide with better than 0.5 dB efficiency over 14 GHz.
Having decoupled the resonators from radiative losses, we consistently achieve single-photon quality factors above $105$, with a two-level-system loss limit above $106$.
arXiv Detail & Related papers (2023-11-03T02:26:44Z) - Discriminating the Phase of a Coherent Tone with a Flux-Switchable
Superconducting Circuit [50.591267188664666]
We propose a new phase detection technique based on a flux-switchable superconducting circuit.
The Josephson digital phase detector (JDPD) is capable of discriminating between two phase values of a coherent input tone.
arXiv Detail & Related papers (2023-06-20T08:09:37Z) - Coupler microwave-activated controlled phase gate on fluxonium qubits [32.73124984242397]
A tunable coupler typically includes a nonlinear element, such as a SQUID, which is used to tune the resonance frequency of an LC circuit connecting two qubits.
Here we propose a complimentary approach where instead of tuning the resonance frequency of the tunable coupler by applying a quasistatic control signal, we excite by microwave the degree of freedom associated with the coupler itself.
arXiv Detail & Related papers (2023-02-20T07:51:04Z) - Wideband Josephson Parametric Isolator [0.0]
We present an alternative two-port isolating integrated circuit derived from the DC Superconducting Quantum Interference Device (DC-SQUID)
Non-reciprocal transmission is achieved using the three-wave microwave mixing properties of a flux-modulated DC--SQUID.
arXiv Detail & Related papers (2022-12-16T16:39:21Z) - An integrated microwave-to-optics interface for scalable quantum
computing [47.187609203210705]
We present a new design for an integrated transducer based on a superconducting resonator coupled to a silicon photonic cavity.
We experimentally demonstrate its unique performance and potential for simultaneously realizing all of the above conditions.
Our device couples directly to a 50-Ohm transmission line and can easily be scaled to a large number of transducers on a single chip.
arXiv Detail & Related papers (2022-10-27T18:05:01Z) - Overcoming I/O bottleneck in superconducting quantum computing:
multiplexed qubit control with ultra-low-power, base-temperature cryo-CMOS
multiplexer [40.37334699475035]
Large-scale superconducting quantum computing systems entail high-fidelity control and readout of qubits at millikelvin temperatures.
Cryo-electronics may offer a scalable and versatile solution to overcome this bottleneck.
Here we present an ultra-low power radio-frequency (RF) multiplexing cryo-electronics solution operating below 15 mK.
arXiv Detail & Related papers (2022-09-26T22:38:09Z) - High fidelity two-qubit gates on fluxoniums using a tunable coupler [47.187609203210705]
Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale quantum computing.
A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture.
Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element.
arXiv Detail & Related papers (2022-03-30T13:44:52Z) - Tunable coupling scheme for implementing two-qubit gates on fluxonium
qubits [0.0]
The superconducting fluxonium circuit is an RF-SQUID-type flux qubit that uses a large inductance built from an array of Josephson junctions or a high kinetic inductance material.
In contrast to the transmon qubit, the anharmonicity of fluxonium can be large and positive, allowing for better separation between the low energy qubit manifold of the circuit and higher-lying excited states.
We propose a tunable coupling scheme for implementing two-qubit gates on fixed-frequency fluxonium qubits, biased at half flux quantum.
arXiv Detail & Related papers (2021-07-24T07:21:01Z) - Enhancement of microwave squeezing via parametric down-conversion in a
superconducting quantum circuit [3.2090709550735097]
We propose an experimentally accessible superconducting quantum circuit, consisting of two coplanar waveguide resonators (CWRs)
In our scheme, the two CWRs are nonlinearly coupled through a superconducting quantum interference device embedded in one of the CWRs.
arXiv Detail & Related papers (2021-04-20T12:43:34Z) - Characterizing and optimizing qubit coherence based on SQUID geometry [41.85858790455642]
The dominant source of decoherence in frequency-tunable superconducting qubits is 1/$f$ flux noise.
We systematically study flux noise amplitudes in more than 50 flux qubits with varied SQUID geometry parameters.
Our results and detailed model provide a guide for minimizing the flux noise susceptibility in future circuits.
arXiv Detail & Related papers (2020-02-21T15:59:52Z)
This list is automatically generated from the titles and abstracts of the papers in this site.
This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.