Surface Optimization of Aluminum Resonators for Robust Quantum Device Fabrication

• URL: http://arxiv.org/abs/2601.04082v1
• Date: Wed, 07 Jan 2026 16:49:53 GMT
• Title: Surface Optimization of Aluminum Resonators for Robust Quantum Device Fabrication
• Authors: Simon J. K. Lang, Ignaz Eisele, Alwin Maiwald, Emir Music, Luis Schwarzenbach, Carla Morán-Guizán, Johannes Weber, Daniela Zahn, Thomas Mayer, Rui N. Pereira, Christoph Kutter,
• Abstract summary: Post-treatment strategies for Al resonators remain underdeveloped.<n>Surface modification approaches for Al resonators subjected to a 24-hour delay prior to cryogenic measurement.<n> HF vapor selectively etched SiO2 while preserving Al2O3, whereas phosphoric acid exhibited the opposite selectivity.
• Score: 0.0
• License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
• Abstract: Aluminum remains the central material for superconducting qubits, and considerable effort has been devoted to optimizing its deposition and patterning for quantum devices. However, while post-processing of Nb- and Ta-based resonators has been widely explored, primarily focusing on oxide removal using buffered oxide etch (BOE), post-treatment strategies for Al resonators remain underdeveloped. This challenge becomes particularly relevant for industry-scale fabrication with multichip bonding, where delays between sample preparation and cooldown require surface treatments that preserve low dielectric loss during extended exposure to ambient conditions. In this work, we investigate surface modification approaches for Al resonators subjected to a 24-hour delay prior to cryogenic measurement. Passivation using self-limiting oxygen and fluorine chemistries was evaluated utilizing different plasma processes. Remote oxygen plasma treatment reduced dielectric losses, in contrast to direct plasma, likely due to additional ashing of residual resist despite the formation of a thicker oxide layer on both Si and Al surfaces. A fluorine-based plasma process was developed that passivated the Al surface with fluorine for subsequent BOE treatment. However, increasing fluorine incorporation in the aluminum oxide correlated with higher loss, identifying fluorine as an unsuitable passivation material for Al resonators. Finally, selective oxide removal using HF vapor and phosphoric acid was assessed for surface preparation. HF vapor selectively etched SiO2 while preserving Al2O3, whereas phosphoric acid exhibited the opposite selectivity. Sequential application of both etches yielded dielectric losses as low as $δ_\mathrm{LP} = 5.2 \times 10^{-7}$ ($Q\mathrm{i} \approx 1.9\,\mathrm{M}$) in the single photon regime, demonstrating a promising pathway for robust Al-based resonator fabrication.

Related papers

• Reducing TLS loss in tantalum CPW resonators using titanium sacrificial layers [0.0]
  We demonstrate a substantial reduction in two-level sacrificial system loss in tantalum coplanar waveguide resonators fabricated on high-resistivity silicon substrates.<n>A 0.2nm titanium film, deposited atop pre-sputtered -tantalum, acts as a solid-state oxygen getter that chemically modifies the native Ta oxide at the metal-air interface.
  arXiv  Detail & Related papers  (2026-01-22T23:45:36Z)
• High temporal stability of niobium superconducting resonators by surface passivation with organophosphonate self-assembled monolayers [1.7591465402018172]
  We report the growth of alkyl-phosphonate self-assembled monolayers (SAMs) on Nb thin films following oxide removal.<n>Un-passivated resonators exhibited an 80% increase in loss at single-photon power levels, whereas SAM-passivated resonators maintained excellent temporal stability.
  arXiv  Detail & Related papers  (2025-08-21T20:50:29Z)
• Improving the lifetime of aluminum-based superconducting qubits through atomic layer etching and deposition [0.11785699115424035]
  We present a dry surface treatment combining atomic layer etching and deposition (ALE and ALD) to mitigate dielectric loss in superconducting quantum devices formed from aluminum thin films on silicon.<n>We measure a two-fold reduction in loss attributed to two-level system absorption in treated aluminum-based resonators and planar transmon qubits.
  arXiv  Detail & Related papers  (2025-06-20T20:41:53Z)
• Enhanced Superconducting Qubit Performance Through Ammonium Fluoride Etch [29.705263765768372]
  Performance of superconducting qubits is often limited by dissipation and two-level systems (TLS) losses. Here, we explore a novel wet chemical surface treatment at the Josephson junction-substrate and the substrate-air interface.
  arXiv  Detail & Related papers  (2024-08-05T23:25:46Z)
• Single photon emitters in monolayer semiconductors coupled to transition metal dichalcogenide nanoantennas on silica and gold substrates [49.87501877273686]
  Transition metal dichalcogenide (TMD) single photon emitters offer numerous advantages to quantum information applications. Traditional materials used for the fabrication of nanoresonators, such as silicon or gallium phosphide (GaP), often require a high refractive index substrate. Here, we use nanoantennas (NAs) fabricated from multilayer TMDs, which allow complete flexibility with the choice of substrate.
  arXiv  Detail & Related papers  (2024-08-02T07:44:29Z)
• Site-Controlled Purcell-Induced Bright Single Photon Emitters in Hexagonal Boron Nitride [62.170141783047974]
  Single photon emitters hosted in hexagonal boron nitride (hBN) are essential building blocks for quantum photonic technologies that operate at room temperature. We experimentally demonstrate large-area arrays of plasmonic nanoresonators for Purcell-induced site-controlled SPEs. Our results offer arrays of bright, heterogeneously integrated quantum light sources, paving the way for robust and scalable quantum information systems.
  arXiv  Detail & Related papers  (2024-05-03T23:02:30Z)
• Characterization of process-related interfacial dielectric loss in aluminum-on-silicon by resonator microwave measurements, materials analysis, and imaging [0.0]
  We investigate the influence of the fabrication process on dielectric loss in aluminum-on-silicon superconducting coplanar waveguide resonators. These devices are essential components in superconducting quantum processors. We identify the relative importance of reducing loss at the substrate-metal and the substrate-air interfaces.
  arXiv  Detail & Related papers  (2024-03-01T18:16:28Z)
• Quantum Emitters in Aluminum Nitride Induced by Zirconium Ion Implantation [70.64959705888512]
  This study investigates aluminum nitride (AlN) as a material with properties highly suitable for integrated on-chip photonics. We conduct a comprehensive study of the creation and photophysical properties of single-photon emitters in AlN utilizing Zirconium (Zr) and Krypton (Kr) heavy ion implantation. With the 532 nm excitation wavelength, we found that single-photon emitters induced by ion implantation are primarily associated with vacancy-type defects in the AlN lattice for both Zr and Kr ions.
  arXiv  Detail & Related papers  (2024-01-26T03:50:33Z)
• Ternary Metal Oxide Substrates for Superconducting Circuits [65.60958948226929]
  Substrate material imperfections and surface losses are one of the major factors limiting superconducting quantum circuitry from reaching the scale and complexity required to build a practicable quantum computer. Here, we examine two ternary metal oxide materials, spinel (MgAl2O4) and lanthanum aluminate (LaAlO3), with a focus on surface and interface characterization and preparation.
  arXiv  Detail & Related papers  (2022-01-17T06:10:15Z)
• Hot-Band Absorption Can Mimic Entangled Two-Photon Absorption [52.77024349608834]
  We investigated the fluorescence signals from Rhodamine 6G and LDS798 excited with a CW laser or an entangled photon pair source at 1060 nm. We observed a signal that originates from hot-band absorption (HBA), which is one-photon absorption from thermally-populated vibrational levels of the ground electronic state. For the typical conditions under which E2PEF measurements are performed, contributions from the HBA process could lead to a several orders-of-magnitude overestimate of the quantum advantage for excitation efficiency.
  arXiv  Detail & Related papers  (2021-11-10T21:17:47Z)
• Oxygen Vacancies in Niobium Pentoxide as a Source of Two-Level System Losses in Superconducting Niobium [41.94295877935867]
  oxygen vacancies in the niobium pentoxide drive two-level system (TLS) losses. We identify a major source of quantum decoherence in three-dimensional superconducting radio-frequency (SRF) resonators and two-dimensional transmon qubits composed of oxidized niobium.
  arXiv  Detail & Related papers  (2021-08-30T16:24:07Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.