Design and Fabrication of Metal-Shielded Fiber-Cavity Mirrors for Ion-Trap Systems
- URL: http://arxiv.org/abs/2510.25294v1
- Date: Wed, 29 Oct 2025 08:57:44 GMT
- Title: Design and Fabrication of Metal-Shielded Fiber-Cavity Mirrors for Ion-Trap Systems
- Authors: Wei-Bin Chen, Ding Fang, Cheng-Hao Zhang, Jin-Ming Cui, Yun-Feng Huang, Chuan-Feng Li, Guang-Can Guo,
- Abstract summary: Trapped ions in micro-cavities constitute a key platform for advancing quantum information processing and quantum networking.<n>We present the design and fabrication of metal-shielded micro-cavity mirrors, enabling the stable realization of ion trap systems integrated with micro cavities.
- Score: 5.338450029868832
- License: http://creativecommons.org/licenses/by/4.0/
- Abstract: Trapped ions in micro-cavities constitute a key platform for advancing quantum information processing and quantum networking. By providing an efficient light-matter interface within a compact architecture, they serve as highly efficient quantum nodes with strong potential for scalable quantum network. However, in such systems, ion trapping stability is often compromised by surface charging effects, and nearby dielectric materials are known to cause a dramatic increase in the ion heating rate by several orders of magnitude. These challenges significantly hinder the practical implementation of ion trap systems integrated with micro-cavities. To overcome these limitations, we present the design and fabrication of metal-shielded micro-cavity mirrors, enabling the stable realization of ion trap systems integrated with micro cavities. Using this method, we constructed a needle ion trap integrated with fiber Fabry-Perot cavity and successfully achieved stable trapping of a single ion within the cavity. The measured ion heating rate was reduced by more than an order of magnitude compared with unshielded configurations. This work establishes a key technique toward fully integrated ion-photon interfaces for scalable quantum network.
Related papers
- Feasibility Study of 3D-Printed Micro Junction Array for Ion Trap Quantum Processor [2.7735268395218564]
We introduce an ion trap platform based on a 3D-printed micro-junction array.<n>The integration of three-dimensionally structured micro Radio-Frequency (RF) electrodes above a surface-electrode trap enables flexible control of electric field profiles.<n>We identify a junction geometry that maintains uniform ion confinement during transport while substantially reducing the pseudopotential barrier.
arXiv Detail & Related papers (2025-09-21T23:17:32Z) - How to integrate a miniature optical cavity in a linear ion trap: shielding dielectrics and trap symmetry [0.0]
An efficient interface between an optical cavity and a linear trap that can keep multiple ions has remained elusive.
We show that simple electrically conductive shielding of the fibres could provide substantial advantage.
We identify essential components and a design strategy that should be incorporated in a linear ion trap for successful integration of a miniature optical cavity.
arXiv Detail & Related papers (2024-09-08T15:08:16Z) - Optimized surface ion trap design for tight confinement and separation of ion chains [0.0]
Qubit systems based on trapped ultracold ions win one of the leading positions in the quantum computing field.
Surface Paul traps for ion confinement open the opportunity to scale quantum processors to hundreds of qubits.
arXiv Detail & Related papers (2024-07-19T10:45:56Z) - Realization of a chip-based hybrid trapping setup for $^{87}$Rb atoms
and Yb$^{+}$ Ion crystals [40.48245609592348]
Hybrid quantum systems integrate laser-cooled trapped ions and ultracold quantum gases within a single experimental configuration.
This study introduces the development and experimental validation of an ion trap chip that incorporates a flat atomic chip trap beneath it.
arXiv Detail & Related papers (2024-01-05T19:30:47Z) - Near-Surface Electrical Characterisation of Silicon Electronic Devices
Using Focused keV Ions [45.82374977939355]
We show how to implant low-energy ions into silicon devices featuring an enlarged 60x60 $mu$m sensitive area.
Despite the weak internal electric field, near-unity charge collection efficiency is obtained from the entire sensitive area.
This can be explained by the critical role that the high-quality thermal gate oxide plays in the ion detection response.
arXiv Detail & Related papers (2022-01-27T06:29:46Z) - Near-Field Terahertz Nanoscopy of Coplanar Microwave Resonators [61.035185179008224]
Superconducting quantum circuits are one of the leading quantum computing platforms.
To advance superconducting quantum computing to a point of practical importance, it is critical to identify and address material imperfections that lead to decoherence.
Here, we use terahertz Scanning Near-field Optical Microscopy to probe the local dielectric properties and carrier concentrations of wet-etched aluminum resonators on silicon.
arXiv Detail & Related papers (2021-06-24T11:06:34Z) - Topologically Protecting Squeezed Light on a Photonic Chip [58.71663911863411]
Integrated photonics offers an elegant way to increase the nonlinearity by confining light strictly inside the waveguide.
We experimentally demonstrate the topologically protected nonlinear process of spontaneous four-wave mixing enabling the generation of squeezed light on a silica chip.
arXiv Detail & Related papers (2021-06-14T13:39:46Z) - Open-cavity in closed-cycle cryostat as a quantum optics platform [47.50219326456544]
We present a fiber-based open Fabry-P'erot cavity in a closed-cycle cryostat exhibiting ultra-high mechanical stability.
This set of results manifests open-cavity in a closed-cycle cryostat as a versatile and powerful platform for low-temperature cavity QED experiments.
arXiv Detail & Related papers (2021-03-09T18:41:48Z) - Hybrid quantum photonics based on artificial atoms placed inside one
hole of a photonic crystal cavity [47.187609203210705]
Hybrid quantum photonics with SiV$-$-containing nanodiamonds inside one hole of a one-dimensional, free-standing, Si$_3$N$_4$-based photonic crystal cavity is presented.
The resulting photon flux is increased by more than a factor of 14 as compared to free-space.
Results mark an important step to realize quantum network nodes based on hybrid quantum photonics with SiV$-$- center in nanodiamonds.
arXiv Detail & Related papers (2020-12-21T17:22:25Z) - Inverse-designed photon extractors for optically addressable defect
qubits [48.7576911714538]
Inverse-design optimization of photonic devices enables unprecedented flexibility in tailoring critical parameters of a spin-photon interface.
Inverse-designed devices will enable realization of scalable arrays of single-photon emitters, rapid characterization of new quantum emitters, sensing and efficient heralded entanglement schemes.
arXiv Detail & Related papers (2020-07-24T04:30:14Z) - Tunable quantum photonics platform based on fiber-cavity enhanced single
photon emission from two-dimensional hBN [52.915502553459724]
In this work we present a hybrid system consisting of defect centers in few-layer hBN grown by chemical vapor deposition and a fiber-based Fabry-Perot cavity.
We achieve very large cavity-assisted signal enhancement up to 50-fold and equally strong linewidth narrowing owing to cavity funneling.
Our work marks an important milestone for the deployment of 2D materials coupled to fiber-based cavities in practical quantum technologies.
arXiv Detail & Related papers (2020-06-23T14:20:46Z) - Integrated optical multi-ion quantum logic [4.771545115836015]
Planar-fabricated optics integrated within ion trap devices can make such systems simultaneously more robust and parallelizable.
We use scalable optics co-fabricated with a surface-electrode ion trap to achieve high-fidelity multi-ion quantum logic gates.
Similar devices may also find applications in neutral atom and ion-based quantum-sensing and timekeeping.
arXiv Detail & Related papers (2020-02-06T13:52:01Z) - Integrated multi-wavelength control of an ion qubit [0.0]
Monolithic integration of control technologies for atomic systems is a promising route to the development of quantum computers and portable quantum sensors.
Here we demonstrate a surface-electrode ion-trap chip using integrated waveguides and grating couplers.
Laser light from violet to infrared is coupled onto the chip via an optical-fiber array, creating an inherently stable optical path.
arXiv Detail & Related papers (2020-01-14T21:23:21Z)
This list is automatically generated from the titles and abstracts of the papers in this site.
This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.