Quantifying surface losses in superconducting aluminum microwave resonators

• URL: http://arxiv.org/abs/2603.13183v1
• Date: Fri, 13 Mar 2026 17:17:27 GMT
• Title: Quantifying surface losses in superconducting aluminum microwave resonators
• Abstract summary: We measure the microwave absorption arising from surface TLSs in superconducting aluminum resonators.<n>We find that the lifetimes of superconducting aluminum resonators are primarily limited by surface losses associated with TLSs in the 2.7 nm-thick native AlOx.<n>We estimate that TLSs in aluminum interfaces contribute around 27% of the relaxation rate of state-of-the-art tantalum-on-silicon qubits.
• Score: 27.343121194681924
• License: http://arxiv.org/licenses/nonexclusive-distrib/1.0/
• Abstract: The recent realization of millisecond-scale coherence with tantalum-on-silicon transmon qubits showed that depositing the Al/AlOx/Al Josephson junction in a high purity, ultrahigh vacuum environment was critical for achieving lifetime-limited coherence, motivating careful examination of the aluminum surface two-level system (TLS) bath. Here, we measure the microwave absorption arising from surface TLSs in superconducting aluminum resonators, following methodology developed for tantalum resonators. We vary film and surface properties and correlate microwave measurements with materials characterization. We find that the lifetimes of superconducting aluminum resonators are primarily limited by surface losses associated with TLSs in the 2.7 nm-thick native AlOx. Treatment with 49% HF removes surface AlOx completely; however, rapid oxide regrowth limits improvements in surface loss and long term device stability. Using these measurements we estimate that TLSs in aluminum interfaces contribute around 27% of the relaxation rate of state-of-the-art tantalum-on-silicon qubits that incorporate aluminum-based Josephson junctions.

Related papers

• Surface Optimization of Aluminum Resonators for Robust Quantum Device Fabrication [0.0]
  Post-treatment strategies for Al resonators remain underdeveloped.<n>Surface modification approaches for Al resonators subjected to a 24-hour delay prior to cryogenic measurement.<n> HF vapor selectively etched SiO2 while preserving Al2O3, whereas phosphoric acid exhibited the opposite selectivity.
  arXiv  Detail & Related papers  (2026-01-07T16:49:53Z)
• Improving the lifetime of aluminum-based superconducting qubits through atomic layer etching and deposition [0.11785699115424035]
  We present a dry surface treatment combining atomic layer etching and deposition (ALE and ALD) to mitigate dielectric loss in superconducting quantum devices formed from aluminum thin films on silicon.<n>We measure a two-fold reduction in loss attributed to two-level system absorption in treated aluminum-based resonators and planar transmon qubits.
  arXiv  Detail & Related papers  (2025-06-20T20:41:53Z)
• Site-Controlled Purcell-Induced Bright Single Photon Emitters in Hexagonal Boron Nitride [62.170141783047974]
  Single photon emitters hosted in hexagonal boron nitride (hBN) are essential building blocks for quantum photonic technologies that operate at room temperature. We experimentally demonstrate large-area arrays of plasmonic nanoresonators for Purcell-induced site-controlled SPEs. Our results offer arrays of bright, heterogeneously integrated quantum light sources, paving the way for robust and scalable quantum information systems.
  arXiv  Detail & Related papers  (2024-05-03T23:02:30Z)
• Characterization of process-related interfacial dielectric loss in aluminum-on-silicon by resonator microwave measurements, materials analysis, and imaging [0.0]
  We investigate the influence of the fabrication process on dielectric loss in aluminum-on-silicon superconducting coplanar waveguide resonators. These devices are essential components in superconducting quantum processors. We identify the relative importance of reducing loss at the substrate-metal and the substrate-air interfaces.
  arXiv  Detail & Related papers  (2024-03-01T18:16:28Z)
• High-Q trenched aluminum coplanar resonators with an ultrasonic edge microcutting for superconducting quantum devices [0.0]
  Dielectric losses are one of the key factors limiting the coherence of superconducting qubits. We report on superconducting CPW microwave resonators with internal quality factors exceeding 5x106 at high powers and 2x106 at low power. Josephson junction compatible CPW resonators fabrication process with both airbridges and silicon substrate etching is proposed.
  arXiv  Detail & Related papers  (2023-06-28T15:25:37Z)
• Improved Coherence in Optically-Defined Niobium Trilayer Junction Qubits [45.786749852292246]
  Niobium offers the benefit of increased operating temperatures and frequencies for superconducting devices. We revisit niobium trilayer junctions and fabricate all-niobium transmons using only optical lithography. We characterize devices in the microwave domain, measuring coherence times up to $62mu$s and an average qubit quality factor above $105$.
  arXiv  Detail & Related papers  (2023-06-09T13:26:13Z)
• Microwave loss characterization using multi-mode superconducting resonators [0.0]
  We introduce a method to measure the microwave losses of materials and interfaces with a single multi-mode superconducting resonator. We present two types of multi-mode superconducting resonators for the study of bulk superconductors.
  arXiv  Detail & Related papers  (2023-05-03T03:10:41Z)
• Millikelvin measurements of permittivity and loss tangent of lithium niobate [50.591267188664666]
  Lithium niobate is an electro-optic material with many applications in microwave signal processing, communication, quantum sensing, and quantum computing. We present findings on evaluating the complex electromagnetic permittivity of lithium niobate at millikelvin temperatures.
  arXiv  Detail & Related papers  (2023-02-24T22:05:42Z)
• Ternary Metal Oxide Substrates for Superconducting Circuits [65.60958948226929]
  Substrate material imperfections and surface losses are one of the major factors limiting superconducting quantum circuitry from reaching the scale and complexity required to build a practicable quantum computer. Here, we examine two ternary metal oxide materials, spinel (MgAl2O4) and lanthanum aluminate (LaAlO3), with a focus on surface and interface characterization and preparation.
  arXiv  Detail & Related papers  (2022-01-17T06:10:15Z)
• Oxygen Vacancies in Niobium Pentoxide as a Source of Two-Level System Losses in Superconducting Niobium [41.94295877935867]
  oxygen vacancies in the niobium pentoxide drive two-level system (TLS) losses. We identify a major source of quantum decoherence in three-dimensional superconducting radio-frequency (SRF) resonators and two-dimensional transmon qubits composed of oxidized niobium.
  arXiv  Detail & Related papers  (2021-08-30T16:24:07Z)
• Quantum Sensors for Microscopic Tunneling Systems [58.720142291102135]
  tunneling Two-Level-Systems (TLS) are important for micro-fabricated quantum devices such as superconducting qubits. We present a method to characterize individual TLS in virtually arbitrary materials deposited as thin-films. Our approach opens avenues for quantum material spectroscopy to investigate the structure of tunneling defects.
  arXiv  Detail & Related papers  (2020-11-29T09:57:50Z)
• Microscopic Relaxation Channels in Materials for Superconducting Qubits [76.84500123816078]
  We show correlations between $T_$ and grain size, enhanced oxygen diffusion along grain boundaries, and concentration of suboxides near the surface. Physical mechanisms connect these microscopic properties to residual surface resistance and $T_$ through losses arising from the grain boundaries and from defects in the suboxides. This comprehensive approach to understanding qubit decoherence charts a pathway for materials-driven improvements of superconducting qubit performance.
  arXiv  Detail & Related papers  (2020-04-06T18:01:15Z)
• Nitrogen-vacancy defect emission spectra in the vicinity of an adjustable silver mirror [62.997667081978825]
  Optical emitters of quantum radiation in the solid state are important building blocks for emerging technologies. We experimentally study the emission spectrum of an ensemble of nitrogen-vacancy defects implanted around 8nm below the planar diamond surface.
  arXiv  Detail & Related papers  (2020-03-31T10:43:26Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.