Spectrally stable nitrogen-vacancy centers in diamond formed by carbon implantation into thin microstructures

• URL: http://arxiv.org/abs/2209.08111v2
• Date: Mon, 5 Dec 2022 13:17:32 GMT
• Title: Spectrally stable nitrogen-vacancy centers in diamond formed by carbon implantation into thin microstructures
• Authors: V. Yurgens, A. Corazza, J. A. Zuber, M. Gruet, M. Kasperczyk, B. J. Shields, R. J. Warburton, Y. Fontana, P. Maletinsky
• Abstract summary: The nitrogen-vacancy center (NV) in diamond is increasingly used as a quantum sensor and as a building block for quantum networks. We demonstrate that implantation of carbon ions yields a comparable density of NVs as implantation of nitrogen ions. We propose a modified NV creation procedure in which the implantation is carried out after instead of before the diamond fabrication processes.
• Score: 0.0
• License: http://creativecommons.org/licenses/by-nc-nd/4.0/
• Abstract: The nitrogen-vacancy center (NV) in diamond, with its exceptional spin coherence and convenience in optical spin initialization and readout, is increasingly used both as a quantum sensor and as a building block for quantum networks. Employing photonic structures for maximizing the photon collection efficiency in these applications typically leads to broadened optical linewidths for the emitters, which are commonly created via nitrogen ion implantation. With studies showing that only native nitrogen atoms contribute to optically coherent NVs, a natural conclusion is to either avoid implantation completely, or substitute nitrogen implantation by an alternative approach to vacancy creation. Here, we demonstrate that implantation of carbon ions yields a comparable density of NVs as implantation of nitrogen ions, and that it results in NV populations with narrow optical linewidths and low charge-noise levels even in thin diamond microstructures. We measure a median NV linewidth of 150 MHz for structures thinner than 5 $\mu$m, with no trend of increasing linewidths down to the thinnest measured structure of 1.9 $\mu$m. We propose a modified NV creation procedure in which the implantation is carried out after instead of before the diamond fabrication processes, and confirm our results in multiple samples implanted with different ion energies and fluences.

Related papers

• Single photon emitters in monolayer semiconductors coupled to transition metal dichalcogenide nanoantennas on silica and gold substrates [49.87501877273686]
  Transition metal dichalcogenide (TMD) single photon emitters offer numerous advantages to quantum information applications. Traditional materials used for the fabrication of nanoresonators, such as silicon or gallium phosphide (GaP), often require a high refractive index substrate. Here, we use nanoantennas (NAs) fabricated from multilayer TMDs, which allow complete flexibility with the choice of substrate.
  arXiv  Detail & Related papers  (2024-08-02T07:44:29Z)
• Site-Controlled Purcell-Induced Bright Single Photon Emitters in Hexagonal Boron Nitride [62.170141783047974]
  Single photon emitters hosted in hexagonal boron nitride (hBN) are essential building blocks for quantum photonic technologies that operate at room temperature. We experimentally demonstrate large-area arrays of plasmonic nanoresonators for Purcell-induced site-controlled SPEs. Our results offer arrays of bright, heterogeneously integrated quantum light sources, paving the way for robust and scalable quantum information systems.
  arXiv  Detail & Related papers  (2024-05-03T23:02:30Z)
• Quantum Emitters in Aluminum Nitride Induced by Zirconium Ion Implantation [70.64959705888512]
  This study investigates aluminum nitride (AlN) as a material with properties highly suitable for integrated on-chip photonics. We conduct a comprehensive study of the creation and photophysical properties of single-photon emitters in AlN utilizing Zirconium (Zr) and Krypton (Kr) heavy ion implantation. With the 532 nm excitation wavelength, we found that single-photon emitters induced by ion implantation are primarily associated with vacancy-type defects in the AlN lattice for both Zr and Kr ions.
  arXiv  Detail & Related papers  (2024-01-26T03:50:33Z)
• Hot ion implantation to create dense NV centre ensembles in diamond [31.114245664719455]
  In this work, we realize N2 ion implantation in the 30 to 40 keV range at high temperatures. At 800 C, NV ensemble photoluminescence emission is three to four times higher than room temperature implanted films.
  arXiv  Detail & Related papers  (2023-11-09T12:47:41Z)
• Optically coherent nitrogen-vacancy defect centers in diamond nanostructures [0.0]
  Nitrogen-vacancy defect centers (NVs) in diamond act as quantum memories and can be interfaced by coherent photons. We present strategies to significantly reduce the electric noise in diamond nanostructures. We propose an entanglement protocol for nanostructure-coupled NVs providing entanglement generation rates up to hundreds of kHz.
  arXiv  Detail & Related papers  (2022-03-10T19:42:43Z)
• Creation of nitrogen-vacancy centers in chemical vapor deposition diamond for sensing applications [0.22723215141187195]
  The nitrogen-vacancy center in diamond is a promising quantum system for magnetometry applications. Key material requirements for NV ensembles are a high NV$-$ concentration, a long spin coherence time and a stable charge state. This study shows a pathway to engineer properties of NV-doped CVD diamonds for improved sensitivity.
  arXiv  Detail & Related papers  (2021-11-15T18:47:08Z)
• Impact of surface and laser-induced noise on the spectral stability of implanted nitrogen-vacancy centers in diamond [0.0]
  quantum network technologies utilize the nitrogen vacancy center in diamond. We create single NV centers by $15$N ion implantation and high-temperature vacuum annealing. Long-term stability of the NV$-$ charge state and emission frequency is demonstrated.
  arXiv  Detail & Related papers  (2021-05-20T03:03:51Z)
• Laser threshold magnetometry using green light absorption by diamond nitrogen vacancies in an external cavity laser [52.77024349608834]
  Nitrogen vacancy (NV) centers in diamond have attracted considerable recent interest for use in quantum sensing. We show theoretical sensitivity to magnetic field on the pT/sqrt(Hz) level is possible using a diamond with an optimal density of NV centers.
  arXiv  Detail & Related papers  (2021-01-22T18:58:05Z)
• Tunable quantum photonics platform based on fiber-cavity enhanced single photon emission from two-dimensional hBN [52.915502553459724]
  In this work we present a hybrid system consisting of defect centers in few-layer hBN grown by chemical vapor deposition and a fiber-based Fabry-Perot cavity. We achieve very large cavity-assisted signal enhancement up to 50-fold and equally strong linewidth narrowing owing to cavity funneling. Our work marks an important milestone for the deployment of 2D materials coupled to fiber-based cavities in practical quantum technologies.
  arXiv  Detail & Related papers  (2020-06-23T14:20:46Z)
• Statistically Modeling Optical Linewidths of Nitrogen Vacancy Centers in Post-Implanted Nanostructures [0.0]
  We investigate the effects of a novel approach to diamond nanofabrication on the optical linewidth of the NV zero-phonon line (ZPL) We examine three post-implanted samples, one implanted with $14$N and two with $15$N isotopes. We find that NV centers formed from nitrogen naturally occuring in the diamond lattice are characterized by a linewidth distribution peaked at an optical linewidth nearly two orders of magnitude smaller than the distribution characterizing most of the NV centers formed from implanted nitrogen.
  arXiv  Detail & Related papers  (2020-05-07T18:00:00Z)
• High-Q Nanophotonic Resonators on Diamond Membranes using Templated Atomic Layer Deposition of TiO2 [48.7576911714538]
  Integrating quantum emitters with nanophotonic resonators is essential for efficient spin-photon interfacing and optical networking applications. Here, we develop an integrated photonics platform based on templated atomic layer deposition of TiO2 on diamond membranes. Our fabrication method yields high-performance nanophotonic devices while avoiding etching wavelength-scale features into diamond.
  arXiv  Detail & Related papers  (2020-04-07T16:43:46Z)

This list is automatically generated from the titles and abstracts of the papers in this site.

This site does not guarantee the quality of this site (including all information) and is not responsible for any consequences.